Loading...
Search for:
weight-fractions
0.004 seconds
Application of a continuous kinetic model for the hydrocracking of vacuum gas oil
, Article Petroleum Science and Technology ; Vol. 32, Issue. 18 , 2014 , Pages 2245-2252 ; ISSN: 10916466 ; Khorasheh, F ; Farhadi, F ; Sharif University of Technology
Abstract
Hydrocracking is one of the most versatile petroleum refining processes for production of valuable products including gasoline, gas oil, and jet fuel. In this paper, a five-parameter continuous lumping model was used for kinetic modeling of hydrocracking of vacuum gas oil (VGO). The model parameters were estimated from industrial data obtained from a fixed bed reactor operating at an average temperature of 400°C and residence time of 0.3 h. Product distributions were obtained in terms of the weight fraction of various boiling point cuts. The model parameters were estimated using the Nelder-Mead optimization procedure and were correlated with temperature. Comparison of experimental and...
Thermal conductivity, viscosity, and electrical conductivity of iron oxide with a cloud fractal structure
, Article Heat and Mass Transfer/Waerme- und Stoffuebertragung ; Volume 53, Issue 4 , 2017 , Pages 1343-1354 ; 09477411 (ISSN) ; Pahlavanzadeh, H ; Kheradmand, A ; Sharif University of Technology
Springer Verlag
2017
Abstract
In the present study, nanoscale iron oxide was synthesized using a hydrothermal method; XRD analysis revealed that all the produced crystals are iron oxide. FESEM microscopic imaging showed that particles are on the scale of nano and their morphology is cloud fractal. To study the laboratory properties of thermal conductivity, viscosity, and electrical conductivity of the nanoparticles, they were dispersed in ethylene glycol-based fluid and the nanofluid was in a two-step synthesis during this process. The experiments were carried out with a weight fraction between 0 and 2 % at temperatures between 25 and 45 °C. According to the results of the experiments, increasing the density of...
Production and characterization of UHMWPE/fumed silica nanocomposites
, Article Polymer Composites ; Volume 33, Issue 10 , 2012 , Pages 1858-1864 ; 02728397 (ISSN) ; Saremi, M. G ; Amoli, B. N ; Izadi, H ; Sharif University of Technology
Wiley
2012
Abstract
Ultrahigh-molecular-weight polyethylene (UHMWPE)/fumed silica nanocomposites were prepared via in situ polymerization using a bi-supported Ziegler-Natta catalytic system. Nanocomposites with different nanoparticle weight fractions were produced in order to investigate the effect of fumed silica on thermal and mechanical properties of UHMWPE/fumed silica nanocomposites. The viscosity average molecular weight (M) of all samples including pure UHMWPE as the reference sample and nanocomposites were measured. Scanning electron microscope (SEM) images showed the homogenous dispersion of nanoparticles throughout the UHMWPE matrix while no nanoparticle cluster has been formed. Crystallization...