Sharif Digital Repository

PbCO 3·PbO and PbCO 3·2PbO compounds were prepared by thermal methods. The structure of each compound was determined by using XRD technique, and their purity was confirmed by analytical methods (98%). Also the thermal characteristics of each compound were investigated by thermogravimetry. At 600°C both compounds decompose completely and produce lead(II) oxide. © 2006 Nauka/Interperiodica  

Corrosion of lead silicate glass (LSG) contacting 0.5 M aqueous nitric acid (HNO 3) was investigated via scanning electron microscopy, energy-dispersive spectroscopy, inductively coupled plasma analysis, and weight-loss measurement to determine the respective contributions of the ion-exchange vs. the hydrolysis reactions. The LSG having X M ≡ Pb+K+Na/Si mole ratios of less than 0.7 showed very little weight loss with no Si network deterioration. At X M > 0.7, the mechanism changed into the hydrolysis, which caused the formation of a networkless gel layer resting at the solid/liquid interface. Addition of titania (TiO 2) and zirconia (ZrO 2) had disparate effects: X M < 0.7 improved corrosion... 

The effects of resin type and content as well as graphite content on physical and mechanical properties of MgO-C refractories, such as density, porosity and strength were studied. The samples were formulated with various amounts of graphite and resin, and their oxidation behavior was isothermally investigated using a thermo gravimeter (TG), in air and at a temperature ranges from 900 to 1300 °C. The results indicated that, low-viscosity resins improved compressibility, but it degraded the strength. Higher resin content also improved the compressibility, but it caused higher porosity after preheating at 600 °C. The results also showed that the porosity and density of tempered samples were... 

The hydrogen-induced cracking (HIC) behavior of X70 pipeline steel was studied by means of Linear Polarization Resistance (LPR), hydrogen permeation tests, weight loss and Scanning Electron Microscopy (SEM). In this study, the dissolved HZS was created by chemical reactions in solution. The specimens were immersed into synthetic sea water saturated with HZS. The experimental results showed that the increase of exposure time and HZS concentration leads to an increase of the hydrogen content in X70 steel, which plays a key role in the initiation and propagation of HIC  

An artificial neural network (ANN) model was used to predict the weight loss of MgO-C composites at different temperatures and graphite contents. The general idea of ANN modeling was presented and after that the empirical weight loss data were used for both model verification and assessment of the oxidation rate predictions. The model was proved to have an astounding power in predicting kinetic parameters of the oxidation process. Graphite oxidation was, for example, found to be controlled by alternative diffusion steps. Plotting the Arrhenius law curves for graphite oxidation indicated a distinguishable slope change at a critical temperature which is related to the graphite content. This... 

Cu-Sn composites incorporated with graphite and/or SiC particles were produced by electrodeposition technique. The effect of particle concentration in the plating bath and current density on tin content and volume percentage of particles in the coatings has been investigated. Structure, morphology, micro hardness and wear properties of the coatings have been studied. The results showed that particles cause an increase of tin content in the plated Cu-Sn. Graphite and silicon carbide particles had different effects on coating hardness; 7.8. vol.% graphite decreased the hardness of Cu-Sn layer from 231. Hv to 172. Hv whereas, 5.1. vol.% SiC raised the hardness to 316. Hv. Moreover, friction... 

Thermal degradation behavior of multi-wall carbon nanotubes (MWCNTs)/ultra high molecular weight polyethylene (UHMWPE) nanocomposites, with different nanotubes contents (0.5, 1.5 and 3.5 wt%) prepared via in-situ polymerization technique have been investigated using thermal gravimetric analysis (TGA). TGA spectra revealed that these nanocomposites had enhanced thermal stability and no significant mass loss (<0.4 wt%) occurred up to 350°C. Thermal degradation of these UHMWPE/MWCNT nanocomposites was investigated in terms of parameters such as the onset temperature of degradation (T 10), the decomposition temperature at 50% wt loss (T 50), the degradation temperature of maximum rate of the... 

Aim. The aim of this study was to determine the effect of a training program on body composition, GH, IGF-1 and insulin in overweight and obese female college students. Methods. The 17 overweight college student females divided into 2 groups: Experimental group (E) with 3 sessions per week, 6 weeks duration (N=9,Age=18.9 ± 1.3,BMI= 28.8 ± 2.6), and non-exercising control group (C) (N=8, Age=19.3 ± 1.8, BMI=26.3 ± 0.9). All measures included Vo2max, body composition, IGF-1, GH and insulin were done at baseline and following the protocol. Results. The calorie intake increased in both groups when compared to the baseline. The Vo2max increased statistically significant in E, and decreased in C.... 

Lead silicate glasses (LSGs) have high gamma-ray attenuation but low chemical durability properties. In this work, LSGs with (55.5-68.5 wt%) PbO content containing ZrO2 and TiO2 additions were produced. The chemical corrosion of various produced LSGs in 0.5 N HNO3 aqueous solution and determination of their gamma-ray attenuation coefficients for 60Co and 137Cs sources were investigated. The weight loss measurements, the SEM micrographs, the EDS analysis of the sample surfaces and the ICP analysis of solution were used to characterize the dissolution process. The effects of PbO content, ZrO2 and TiO2 additives on chemical corrosion, and also the effect of PbO on gamma-ray attenuation... 

LM13 alloy is widely used in piston industry, due to its low coefficient of thermal expansion, excellent castability and hot tear resistance. In this research effect of casting process on wear behavior of LM13 alloy was investigated. First, samples were produced using two casting processes and heat treated. Then wear behavior of these samples under dry sliding condition was examined. Results of hardness and strength tests indicated that squeeze cast specimens exhibited higher mechanical properties. Wear experiment results showed that in both squeeze and gravity cast specimens, amount of weight loss increases with increase in sliding distance which is accompanied by reduction in wear rate and... 

During the recent years, some Mg based alloys have extensively been considered as a new generation of degradable and absorbable bio-medical materials. In this work, the Mg–2Zn–1Gd–1Ca (wt%) alloy as a new metallic bio-material was produced by the casting process followed by the heat treatment. The samples of the alloy were solution treated at temperatures of 500, 550, and 600 °C and then quench aged at temperatures of 125, 150, and 175 °C. The results of SEM-EDS examinations indicated that the alloy microstructure consists of α-Mg matrix and the Ca2Mg6Zn3 and Mg3Gd2Zn3 secondary phases. With regard to the results of Vickers hardness test, the temperatures of 500 °C and 150 °C were selected... 

Multi wall carbon nanotube (MWCNT) doped ZnO nanofibers were fabricated by electrospinning for the first time. We have successfully demonstrated the photocatalytic activity of doped nanofibers under visible light. Scanning electron microscopy showed that the diameter of MWCNT-doped ZnO nanofibers varied from 120 to 300 nm without agglomeration of MWCNT. Fourier transform infrared spectroscopy and X-ray diffraction studies proved the formation of ZnO bond and wurtzite structure with smaller crystal size in doped nanofibers. Raman spectra demonstrated slight shift in bond position after nanofiber doping, indicating the chemical bond between MWCNT and ZnO. X-ray photoelectron spectroscopy... 

Electrophoretic technique was used to deposit micro- and nano-sized aluminum nitride coatings on stainless steel surfaces by using a well-dispersed stable suspension produced by addition of AlN powder plus a small amount of iodine to ethanol. Parabolic regime governed the deposition. Electrophoretic deposition for 240 s at 100 V resulted in formation of a uniformly dense film on the top, but a porous inhomogeneous layer at the bottom. This was attributed to fast deposition of coarse particles and/or agglomerates at large electric fields. After drying, micro-sized particles led to a uniform crack-free interface while nano-particles resulted in fragmented non-cohesive layers. Weight loss... 

Hydrogen storage capacities of raw, oxidized, purified and Fe-doped multi-walled carbon nanotubes (MWCNTs) were studied by electrochemical method. Based on transmission electron microscopy and Raman spectroscopic data, thermal oxidation removed defective graphite shells at the outer walls of MWCNTs. The analysis results indicated that the acid treatment dissolved most of the catalysts and opened some tips of the MWCNTs. Thermal gravimetric analysis and differential scanning calorimetry results illustrated that by oxidation and purification of MWCNTs, the weight loss peak shifts toward a higher temperature. N2 adsorption isotherms of the purified and oxidized MWCNTs showed an increase in N2... 

Hydrolysis kinetics of the lead silicate glass (LSG) with 40 mol% PbO in 0.5 N HNO3 aqueous acid solution was investigated. The surface morphology and the gel layer thickness were studied by scanning electron microscopy (SEM) micrographs. Energy dispersive X-ray spectroscopy (EDS) and inductively coupled plasma spectroscopy (ICP) were used to determine the composition of the gel layer and the aqueous solution, respectively. The silicon content of the dissolution products was determined by using weight-loss data and compositions of the gel layer and the solution. The kinetic parameters were determined using the shrinking-core-model (SCM) for rate controlling step. The activation energy... 

Post-deposition annealing effects on nanomechanical properties of granular TiO2 films on soda-lime glass substrates were studied. In particular, the effects of Na diffusion on the films' mechanical properties were examined. TiO2 photocatalyst films, 330 nm thick, were prepared by dip-coating using a TiO2 sol, and were annealed between 100 °C and 500 °C. Film's morphology, physical and nanomechanical properties were characterized by atomic force microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, differential thermo-gravimetric analysis, and nanoindentation. Contrary to expectations, the maximum film hardness was achieved for 300°C annealing, with a value of 0.69 ± 0.05 GPa.... 

The effect of Rare earths addition to AZ91 magnesium alloy and its influence on the microstructure and mechanical properties was investigated in this study. Addition of cerium rich misch metal to AZ91 alloy resulted in formation of needle shape particles, which had a very high thermal stability, providing superior mechanical properties compared to AZ91 magnesium alloy. As a result, the grain boundaries were less susceptible for grain boundary sliding at high temperatures. The steady state creep rates were specified and for the AZ91 alloy and the results indicate a mixed mode of creep behavior, with some grain boundary effects contributing to the overall behavior. However for the RE added... 

A novel sulfoxide containing bis(ether amine) monomer, 2,2'-sulfoxide- bis[4-methyl(2-trifluoromethyl)4-aminophenoxy) phenyl ether] (M2), was synthesized from the halogen displacement of 2-chloro-5-nitrobenzotrifluoride with dibenzosulfoxide (DH) in the presence of potassium carbonate, followed by catalytic reduction of bis(ether nitro) intermediate with Zinc/Ammonium chloride. A series of organic-soluble poly(ether amide)s (PA1-7) bearing sulfoxide and electronwithdrawing trifiuoromethyl group were synthesized from bis(ether amine) with various aromatic diacids (1-7) via a direct polycondensation with triphenyl phosphite and pyridine. The resulting polymers had inherent viscosities ranging... 

Background: A small amount of methanol is produced endogenously in the human body but it is efficiently metabolized by alcohol dehydrogenase (ADH) and other enzymes, and the products eliminated without harm. In this study, we present a new entity of inborn error of methanol metabolism due to a mutation in the ADH1C gene coding for the γ subunit that is part of several ADH isoenzymes. Results: This disorder was discovered in an 11.58-year-old boy. During one 9-month hospital admission, he had periods of 1–4 days during which he was comatose, and between these periods he was sometimes verbose and euphoric, and had ataxia, dysarthria. Following hemodialysis treatments, he became conscious and... 

In this research, UiO-66 and its composite nanoparticles with thermally oxidized nanodiamond (OND) were synthesized via a simple solvothermal method and utilized as solid adsorbent for the removal of anionic methyl red (MR) dye and cationic malachite green (MG) dye from contaminated water. The synthesized adsorbents were analyzed by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), N2 adsorption–desorption, and zeta potential analyzer. The influences of various factors such as initial concentrations of the dyes, adsorption process time, solution pH, solution temperature and ionic...