Sharif Digital Repository

Stress variations around wellbores and in the reservoirs are of much interest in subsequent drilling operations, future production, and petroleum reservoir development. Stress variations induced by in situ stresses, pore pressure, and temperature changes during drilling operations may lead to various modes of instabilities in forms of induced fractures and borehole breakouts. Previous studies of thermally induced stresses were primarily based on either assumptions of heat conduction through rock matrix or heat convection, in this case, without considering the effect of solid grain thermal conductivity. To analyze wellbore stability, in the present work, a thermo-poro-mechanical model that is... 

We consider the application of the Finite Element Method (FEM) for numerical pressure transient analysis under conditions where no reliable analytical solution is available. Pressure transient analysis is normally based on various analytical solutions of the linear one-dimensional diffusion equation under restrictive assumptions about the formation and its boundaries. For example, the formation is either assumed isotropic or a restrictive a priori assumption is made about its heterogeneity. The wellbore storage effect is also often considered without regard to the possibility of phase redistribution. In many practical situations such restrictions are not justified and analytical solutions do... 

In recent years, growing interest in underbalanced drilling has resulted in the rapid development of its associated equipment technology, practices, and procedures. Underbalanced drilling is used to avoid lost circulation, formation damage, and decreasing weight on bit. However, the risk of wellbore collapse due to lake of hydrostatic mud pressure is high; therefore, using good geo-mechanical model may avoid wellbore instability problems. In order to evaluate the potential for wellbore instability, it is necessary to use an elastoplastic model to compute the stresses and strains around the bore hole. Furthermore, it should be mentioned that the laser drilling process depends extremely on the... 

Wellbore stability is a main concern in drilling operation. Troublesome drilling issues are chemically active formations and/or high-pressure–high-temperature environments. These are mainly responsible for most of wellbore instabilities. Wellbore failure is mostly controlled by the interaction between active shales and drilling fluid in shale formations. The factors influencing this interaction consist of fluid pressure, temperature, composition of drilling fluid, and exposure time. In this paper, a non-linear fully coupled chemo-thermo-poroelasticity model is developed. At first, a fully implicit finite difference model is presented to analyze the problem, and then, it is verified through... 

Diversion in heterogeneous carbonate reservoirs plays the most important role to the success of acidizing. Without the use of diversion, more acid preferentially flows into the high-permeability region and leaves the low-permeability region underreacted. But a clear understanding of diverting agents, such as polymer-based in-situ-gelled acids, can help uniformly stimulate the near-wellbore region. In this paper, we correct the rheological model that was developed by Ratnakar et al. (2013) according to experimental data from Gomaa and Nasr-El-Din (2010b) by considering shear-rate effect in a two-scale continuum model. It is found that the rheology parameters and shear rate are influential... 

The positive coupling effect decreases the condensate saturation as a result of very high flow rates in vicinity of the wellbore. The current work challenges the notion that the positive rate effect does not lead in falling trend of condensate saturation around the wellbore in the case of rich gas composition. According to the results obtained from this parameter case study, four distinct trends would appear in the condensate saturation profile of both lean and rich gas compositions. These quadruplet trends are consistent and their occurrence is mainly related to the considered base capillary number (Ncb) which is likely dependent to the composition of the fluid  

Field evidence indicates that the thermal and chemical regimes in wellbore considerably affect the wellbore stability. This study presents a general coupled model for transport of solute, solvent and heat including their combined effects on the wellbore stability. Optimization of drilling fluid parameters is crucial for wellbore stability analysis particularly in high pressure-high temperature environments. The coupled effects of chemical potential and temperature gradients on fluid flow significantly change the pore pressure and stress around a borehole. The effects of various parameters such as mud weight, solute concentration gradient, shale properties, and temperature gradient on... 

Production logging is used to evaluate wells production performance. Interpretation of production log data provides velocity profile and contribution of each zone on total production. In multi-phase flow conditions, production log interpretation can be challenging since producing fluids do not have similar densities and travel with different speed depending on fluids properties and wellbore deviation. Production log interpretation in multi-phase producing wells requires identifying downhole flow regimes and determining velocity profile for each phase. There are different flow regimes and velocity models available, which are being used in production log interpretation to determine wells flow... 

The main objective of perforating is to connect the wellbore to the reservoir zone by creating tunnels through casing and damaged zone into the undamaged rock. The process of detonating perforation charges generally causes damage due to crushed rock material around the perforation tunnels. There are different methods used to mitigate damage due to perforation, such as static and dynamic underbalanced perforation. In static underbalanced perforation, conventional high shot density perforating guns are run in underbalanced conditions in order to have clean-up after perforation. In dynamic underbalanced perforation, a specific gun design associated with gun puncher charges provides dynamic... 

Recently, it was found that ultrasonic wave technology can be used as a method for asphaltene deposits removal from the near wellbore region. However, ultrasounds can affect asphaltene resolution.In this work, asphaltene resolution in several crude oil samples exposed to ultrasonic waves for different time intervals is studied by confocal microscopy. The colloidal structure of flocks is described by analysis of asphaltene particle size distribution to investigate ultrasonic application in solving asphaltene deposition problems.. The results show that for the first 90 minutes of flocculation time, the size of aggregates increases rapidly, and reaction limited aggregation model matches well... 

Temperature changes in and around the wellbore could lead to significant well performance and flow assurance issues. Despite its importance, near wellbore temperature change due to gas production and its importance on well performance is not well understood. Reduction of temperature in the near well bore section, could potentially lead to hydrate formation and as a result reduction of well performance. This work is aimed at evaluating the thermal behaviour in the near wellbore region of a low to tight permeability gas reservoir (ranging between 0.02 and 10 mD) during its natural depletion. The study is conducted by using a thermal-compositional simulator. The process required to simulate... 

Asphaltene precipitation is known as one of the challenging problems in petroleum industries which have significant effects on production such as formation damage and wellbore plugging. To solve this problem, calculation of precipitated asphaltene becomes highlighted so in the present study a novel approach is proposed based on ANFIS algorithm to estimate precipitated asphaltene in terms of dilution ration, carbon number of precipitants and temperature. The particle swarm optimization (PSO) method is applied to optimize ANFIS algorithm parameters. The proposed model was evaluated based on statistical parameters and the calculated R2, AARD and RMSE for the total data are 0.90309, 9.4908 and... 

During transient tests, both pressure and temperature are changed depending on downhole flow rate. In gas producing wells, Joule-Thomson cooling and frictional heating effects are the main dynamic factors causing flowing bottomhole temperature to differ from the static formation temperature at that depth. When a gas well is shut in, JT cooling effect is vanished and this causes a sharp increase in sandface temperature. As effect of wellbore storage ends, wellbore temperature gradually cools down due to heat conduction with near wellbore region. This paper demonstrates a new technique for using temperature transient data in gas wells in order to determine end of wellbore storage. Also, effect...