Sharif Digital Repository

Because of corrosion resistance and antibacterial effects, shape memory Ni-Ti-Ag alloy can be considered for different biomedical applications. Mechanical alloying is used to produce nanostructured Ni-Ti-Ag alloy from elemental powders. X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) are used to characterize the product. Results show that after 1h milling, homogenous distribution of the elements occurs; while no intermetallic compounds is observed. After 3h milling, titanium dissolves in nickel to form amorphous and nanostructured solid phases. Peaks of B2 phase appear in the XRD pattern after the 3h milling of the powder mixture. Sintering of the 3h-milled... 

Partial substitutions of Pr and Ce are known to suppress the superconducting state in REBa2Cu3O7-δ systems. We have substituted Ce for Gd in Gd1-xCexBa 2Cu3O7-δ compounds with x = 0.0-0.6 by the standard solid-state reaction technique. X-ray diffraction (XRD) experiments are performed and their results are refined by the Rietveld method. XRD analysis shows a predominantly single-phase perovskite structure with few impurity phases. Our resistivity results show that, by increasing the Ce content, Tc decreases, the transition temperature width increases, and in the normal state a metal-insulator transition (MIT) occurs at x c = 0.12. The normal state resistivity of the samples and their slopes... 

This paper deals with an experimental investigation into the mechanical performance and microstructure characteristics of the cementitious mortars containing recycled waste materials subjected to acidic, neutral and alkaline environments. The recycled waste materials include glass, eggshell, iron and rubber powder in various amounts, namely 7, 14 and 21% by volume, as the replacement for ordinary Portland cement (OPC). In this respect, to examine the mechanical performance of the specimens, the compressive, tensile and bending strength tests as well as water absorption test were carried out at the ages of 7, 28 and 90 days. Moreover, to study the microstructure of the specimens, the scanning... 

Co-Ce doped Ni nanocrystalline ferrites having composition Ni0.8Ce0.2CoxFe2-xO4 with x = 0.00, 0.25, 0.50, 0.75, 1.00 were fabricated by sol gel auto combustion method. Synthesized samples were investigated by thermal gravimetric and differential thermal analysis (TGA-DTA), Fourier transform infrared spectroscopy (FTIR), x-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive analysis (EDX) and vibrating sample magnetometer (VSM) to study the phase, vibrational modes, structure, surface analysis and magnetic properties respectively. Structural parameters (lattice parameters, cell volume, crystallite size and micro strains) were also calculated from XRD recorded data.... 

Pr doped spinel nanoferrites having following composition Cu Pr x Fe 2-x O 4 (x = 0, 0.25, 0.50, 0.75, 1.00) were synthesized using sol-gel route. Prosademium (Pr) which is a rare earth metal was doped to tailor the properties of the Cu spinel nanoferrites. Characterization tools such as FTIR, XRD, FESEM and VSM were employed to investigate the phase, absorption bands, structure, microstructure and magnetic properties. FTIR was used to see the absorption bands and force constants of the Pr doped Cu spinel nanoferrites. Crystallite size, lattice parameters, cell volume and micro strains were determined from XRD data. Bulk density, X-ray density and porosity of the Pr doped Cu spinel... 

This paper is devoted to investigation of morphological and physical-mechanical properties of polyethylene (PE)/clay nanocomposites prepared via in situ polymerization method using bi-supported Ziegler-Natta catalyst. Bentonite type clay and MgCl2 (ethoxide type) were used as the support of TiCl4. Catalyst support and polymerization process have been done in slurry phase using Triisobutylaluminum as the co-catalyst. The microstructure of the nanocomposites was examined by X-ray diffraction (XRD) and transmission electron microscopy (TEM). XRD and TEM indicated that almost fully exfoliated PE/clay nanocomposites were produced successfully using this method. According to permeability...