Loading...

Optimization of biodiesel production by alkali-catalyzed transesterification of used frying oil

Atapour, M ; Sharif University of Technology

1257 Viewed
  1. Type of Document: Article
  2. DOI: 10.1016/j.psep.2012.12.005
  3. Abstract:
  4. Biodiesel as an alternative fuel for fossil diesel has many benefits such as reducing regulated air pollutants emissions, reducing greenhouse gases emissions, being renewable, biodegradable and non-toxic. In this study, used frying oil was applied as a low cost feedstock for biodiesel production by alkali-catalyzed transesterification. The design of experiments was performed using a double 5-level-4-factor central composite design coupled with response surface methodology in order to study the effect of factors on the yield of biodiesel and optimizing the reaction conditions. The factors studied were: reaction temperature, molar ratio of methanol to oil, catalyst concentration, reaction time and catalyst type (NaOH and KOH). A quadratic model was suggested for the prediction of the ester yield. The p-value for the model fell below 0.01 (F-value of 27.55). Also, the R2 value of the model was 0.8831 which indicates the acceptable accuracy of the model. The optimum conditions were obtained as follows: reaction temperature of 65 C, methanol to oil molar ratio of 9, NaOH concentration of 0.72% w/w, reaction time of 45 min and NaOH as the more effective catalyst. In these conditions the predicted and observed ester yields were 93.56% and 92.05%, respectively, which experimentally verified the accuracy of the model. The fuel properties of the biodiesel produced under optimum conditions, including density, kinetic viscosity, flash point, cloud and pour points were measured according to ASTM standard methods and found to be within specifications of EN 14214 and ASTM 6751 biodiesel standards
  5. Keywords:
  6. Design of experiments ; Optimization ; Response surface methodology ; Biodiesel production ; Catalyst concentration ; Central composite designs ; Greenhouse gases emissions ; Reaction conditions ; Reaction temperature ; Used frying oil ; Alternative fuels ; Biodiesel ; Catalysis ; Catalysts ; Esterification ; Esters ; Methanol ; Surface properties ; Transesterification
  7. Source: Process Safety and Environmental Protection ; Vol. 92, issue. 2 , 2014 , pp. 179-185 ; ISSN: 09575820
  8. URL: http://www.psep.ichemejournals.com/article/S0957-5820%2812%2900163-2/abstract