Loading...

Study the failure of casted copper anode: The formation of bumps defects on the surface of the anode during casting

Reza Shojaei, M ; Sharif University of Technology | 2022

109 Viewed
  1. Type of Document: Article
  2. DOI: 10.1016/j.engfailanal.2022.106426
  3. Publisher: Elsevier Ltd , 2022
  4. Abstract:
  5. Copper anode (∼98%) is widely used to produce the cathode (99.995 wt%) in electrorefining process. These anodes sometimes become problematic from the production line due to the presence of bumps/holes on their surface. To find the reason of this defect, chemical composition of the three casted anodes was determined by the quantmeter analysis. Also, the microscopic and phase analysis were done by FESEM, EDS, XRD, and XRF for three types of anodes bump. The chemical analysis of anodes confirmed a high level of sulfur and oxygen, which have a key role in the formation of bumps. The results confirmed the presence of impurities including Cu2S, BaSO4, CaCO3 and MgCO3, which cause the formation of gas bubbles at the final stage of solidification. The main source of these impurities was barium sulfate as mold covering and magnesia-chrome bricks (as refractories). To prevent bumps phenomena, the control of impurities content is necessary. © 2022 Elsevier Ltd
  6. Keywords:
  7. Bumps ; Casting defects ; Engineering failure ; Anodes ; Barium sulfate ; Calcite ; Calcium carbonate ; Chemical analysis ; Copper compounds ; Failure (mechanical) ; Magnesia ; Sulfur compounds ; Anode failure ; Bump ; Bump defects ; Casted anode ; Casting defect ; Copper anode ; Electrorefining plant ; Electrorefining process ; Engineering failures ; Electrorefining
  8. Source: Engineering Failure Analysis ; Volume 138 , 2022 ; 13506307 (ISSN)
  9. URL: https://www.sciencedirect.com/science/article/abs/pii/S1350630722004009