Evaluating the Method of Component Mode Synthesis (CMS)for a Central Beam a with Four Side Beams, M.Sc. Thesis Sharif University of Technology ; Haddadpour, Hassan (Supervisor) ; Mohammad Navazi, Hossein (Supervisor)
Abstract
This research investigates the possibility of using the component mode synthesis (CMS) method in experimentation. It should be noted that the original idea for this project originated from an industrial problem. The main issue in this problem was the lack of sufficient equipment to conduct tests on very large structural modes and the high computational cost for their analysis. Therefore, a test platform was constructed using a scaled-down sample (approximately 1:25) with connections that closely resembled real connections. This assembly was then tested separately, and the results were compared with analytical analyses. After updating and correcting the model in several stages, the structure...
Cataloging briefEvaluating the Method of Component Mode Synthesis (CMS)for a Central Beam a with Four Side Beams, M.Sc. Thesis Sharif University of Technology ; Haddadpour, Hassan (Supervisor) ; Mohammad Navazi, Hossein (Supervisor)
Abstract
This research investigates the possibility of using the component mode synthesis (CMS) method in experimentation. It should be noted that the original idea for this project originated from an industrial problem. The main issue in this problem was the lack of sufficient equipment to conduct tests on very large structural modes and the high computational cost for their analysis. Therefore, a test platform was constructed using a scaled-down sample (approximately 1:25) with connections that closely resembled real connections. This assembly was then tested separately, and the results were compared with analytical analyses. After updating and correcting the model in several stages, the structure...
Find in contentBookmark |
|