Loading...

Design and Fabrication of a Microfluidic Chip for Live and Dead Cell Separation

Tajik, Parham | 2018

570 Viewed
  1. Type of Document: M.Sc. Thesis
  2. Language: Farsi
  3. Document No: 50473 (08)
  4. University: Sharif University of Technology
  5. Department: Mechanical Engineering
  6. Advisor(s): Firouzbakhsh, Keykhosrow; Saeedi, Mohammad Saeed
  7. Abstract:
  8. The recent breakthroughs in the lab-on-a-chip technology will not be directly used as clinical devices unless the specific applications are carefully tested and certified. As there is a growing trend towards microfluidic devices for biomedical research, an active microfluidic device was developed. Common microfabrication methods were used to develop a microchip to separate and concentrate live and dead cells based on the dielectrophoresis phenomenon. Unique capabilities of the dielectrophoresis phenomenon make it a powerful tool for micro particle manipulation in micro scale. In this research, geometry for the mentioned purpose is designed and optimized. Three-dimensional microelectrodes are embedded in the microchannel to make the dielectrophoretic force. The mentioned force, near the edge of the microelectrodes, acts like a selective barrier to live and dead cells. In this work, after reviewing the previously developed devices, theoretical backgrounds of the required phenomena were studied comprehensively. Next, numerical simulations were employed to compute the dielectrophoresis force, particle trajectories and the effective working parameters by means of the COMSOL Multiphysics® software. Three different fabrication methods were examined prior to the final device fabrication. In this experimental study, live and dead cells were introduced to the microchip and the efficiency of the separation was measured using optical microscopy. Moreover, the performance of the presented design was demonstrated using Polystyrene micro particles. A good agreement existed between the simulations and the experimental results, rendering a high quality performance for the microchip
  9. Keywords:
  10. Microfabrication ; Separation ; Lab-on-a-Chip ; Microelectromechanical Systems (MEMS) ; Dielectrophoresis Technique ; Microfluidic System

 Digital Object List

 Bookmark

No TOC