Experimental and thermomechanical analysis of the effect of tool pin profile on the friction stir welding of poly(methyl methacrylate) sheets

Aghajani Derazkola, H ; Sharif University of Technology | 2018

685 Viewed
  1. Type of Document: Article
  2. DOI: 10.1016/j.jmapro.2018.06.015
  3. Publisher: Elsevier Ltd , 2018
  4. Abstract:
  5. Effects of frustum, cubic and triangle tool pin profiles on the friction stir welding (FSW) of poly(methyl methacrylate) (PMMA) were studied by experimental analysis and thermomechanical simulations. It is shown that employing pins with a low contact surface area form macrocracks and voids along the joint line. Edged-type pins locally stir the polymer and cause tunnel defects which are formed at the root of the joint. In contrast, pins with relatively smooth and large surface area would yield a defect-free weldment if an appropriate processing condition is employed. Mechanical examinations in longitudinal (LS) and transverse (TS) directions indicate that the highest tensile strength (LS = 59 MPa and TS = 43 MPa) of the joint is attained for the frustum pin. The result of Izod test also determines a higher impact energy of the joint for the frustum pin as well. Fractographic studies indicate that cracks are initiated from internal defects and voids, propagating through the material to cause brittle rupture. Interestingly, the effect of pin geometry on the tensile strength and impact energy is different than that hardness (in ShoreD scale). © 2018 The Society of Manufacturing Engineers
  6. Keywords:
  7. Material flow ; Mechanical property ; PMMA ; Thermomechanical model ; Tool pin profile ; Esters ; Friction ; Mechanical properties ; Research laboratories ; Tensile strength ; Tribology ; Friction stir welding(FSW) ; Material Flow ; PMMA ; Poly(methyl methacrylate) (PMMA) ; Thermo-mechanical analysis ; Thermomechanical model ; Thermomechanical simulation ; Tool pin profile ; Friction stir welding
  8. Source: Journal of Manufacturing Processes ; Volume 34 , 2018 , Pages 412-423 ; 15266125 (ISSN)
  9. URL: https://www.sciencedirect.com/science/article/pii/S1526612518301634