Numerical investigation of thermal performance augmentation of nanofluid flow in microchannel heat sinks by using of novel nozzle structure: sinusoidal cavities and rectangular ribs

Khodabandeh, E ; Sharif University of Technology | 2019

302 Viewed
  1. Type of Document: Article
  2. DOI: 10.1007/s40430-019-1952-z
  3. Publisher: Springer Verlag , 2019
  4. Abstract:
  5. In this paper, we present a numerical simulation of a laminar, steady and Newtonian flow of f-graphene nanoplatelet/water nanofluid in a new microchannel design with factors for increasing heat transfer such as presence of ribs, curves to enable satisfactory fluid mixing and changing fluid course at the inlet and exit sections. The results of this study show that Nusselt number is dependent on nanoparticles concentration, inlet geometry and Reynolds number. As the nanofluid concentration increases from 0 to 0.1% and Reynolds number from 50 to 1000, the Nusselt number enhances nearly up to 3% for increase in fluid concentration and averagely from 15.45 to 54.1 and from 14.5 to 55.9 for geometry with and without rectangular rib, respectively. The presence of ribs in the middle section of microchannel and curves close to hot walls causes a complete mixing of the fluid in different zones. When the nanoparticles concentration is increased, the pressure drop and velocity gradient will become higher. An increased concentration of nanoparticles in contribution with higher Reynolds numbers only increases the fraction factor slightly. (The fraction factor increases nearly 37% and 35% for Re = 50 and 1000, respectively.) The highest uniform temperature distribution can be found in the first zones of fluid in the microchannel and by further movement of fluid toward exit section, because of decreasing difference between surface and fluid temperature, the growth of temperature boundary layer increases and results in non-uniformity in temperature distribution in microchannel and cooling fluid. With decrease in the concentration from 0 to 0.1%, the average outlet temperature and FOM decrease nearby 0.62% and 6.15, respectively. © 2019, The Brazilian Society of Mechanical Sciences and Engineering
  6. Keywords:
  7. Microchannel heat sinks ; Nanofluid flow ; Novel nozzle structure ; Rectangular ribs ; Sinusoidal cavities ; Thermal performance ; Boundary layers ; Curricula ; Heat sinks ; Microchannels ; Mixing ; Nanoparticles ; Nozzles ; Nusselt number ; Reynolds number ; Temperature distribution ; Micro channel heat sinks ; Nozzle structure ; Nanofluidics
  8. Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering ; Volume 41, Issue 10 , 2019 ; 16785878 (ISSN)
  9. URL: https://link.springer.com/article/10.1007/s40430-019-1952-z