Sharif Digital Repository

Nanoparticles for biomedical use must be cytocompatible with the biological environment that they are exposed to. Current research has focused on the surface functionalization of nanoparticles by using proteins, polymers, thiols and other organic compounds. Here we show that inorganic nanoparticles such as titanium oxide can be coated by pyrolytic carbon (PyC) and that the coating has cytocompatible properties. Pyrolization and condensation of methane formed a thin layer of pyrolytic carbon on the titanium oxide core. The formation of the PyC shell retards coalescence and sintering of the ceramic phase. Our MTT assay shows that the PyC-coated particles are cytocompatible at employed doses  

The objective of this work was to study the influence of titanium variations on the API 5L-X70 steel weld metal properties. The relationship between microstructure and toughness of the weld deposit was studied by means of full metallographic, longitudinal tensile and Charpy-V notch tests on the specimens cut transversely to the weld beads. The best combination of microstructure and impact properties was obtained in the range of 0.02-0.05% titanium. By further increasing of titanium content, the microstructure was changed from a mixture of acicular ferrite, grain-boundary ferrite, Widmanstätten ferrite to a mixture of acicular ferrite, grain-boundary ferrite, bainite and ferrite with M/A... 

Titanium is a highly reactive metal, so that whenever it is exposed to air or other environments containing available oxygen, a thin layer of oxide is formed on the surface. This layer increases the corrosion resistance of titanium. The formation of the oxide film can be electrochemically performed by anodizing. In this research, anodizing of titanium was performed in phosphate-base solutions such as H3PO4, NaH2PO 4·2H2O and Na2HPO4 at 9.75 mA/cm2 and 35 °C under galvanostatic conditions. The potential-time curves in the above mentioned solutions show that the anodic films formed on Ti are compact and their thickness depends on the solution type and concentration. The SEM and XRD studies... 

Titanium is a highly reactive metal with an inclination to compose with oxygen. In order to increase its corrosion resistance and application, therefore, a thin layer of titanium oxide is produced on the surface by chemical and electrochemical methods. In the present research, titanium has been anodized in 20 M of NaOH solution under potentiostatic conditions at constant voltages of 25 and 35 V. The microstructure of the anodic layers has been studied by the use of a Scanning Electron Microscope (SEM) and X-Ray Diffraction (XRD). The results indicated that the structure of the anodic layers is amorphous with low porosity and that thickness increases with an increase in anodizing voltage. The... 

Gas sensors have been fabricated based on field ionization from titanium oxide nanotubes grown on titanium foil. Ordered nanaotube arrays of titanium oxides were grown by the anodization method. We measured breakdown voltages and discharge currents of the device for various gases. Our gas ionization sensors (GIS) presented good sensitivity, selectivity, and short response time. The GISs based on TiO2 nanotube arrays showed lower breakdown voltage, higher discharge current, and good selectivity. An excellent response observed for Ar compared to other gases. Besides, by introducing 2 % CO and 4 % H2 to N2 flow gas, the amount of breakdown voltage shifts about 20 and 70 volts to the lower... 

In this work the titanium dioxide powder was prepared by the optimized and simple Sol-Gel method and then characterized. The gelling pH was set to values of 3 (TiO2-A), 7 (TiO2-N) and 9 (TiO2-B) to observe the effect on the properties of the material. In these three cases nanoparticulated materials were obtained with particle sizes between 10nm and 20nm. The larger surface areas were obtained at pH 3, which is several times larger than the others. Furthermore, with the gelling condition pH 3, it was possible to synthesize pure anatase phase titania. Some preliminary results on the test of the photocatalytic activity of the synthesized materials in the reduction of nitric oxide are presented.... 

TiO2-based photocatalysts are seen as the most common agents for the photodegradation of bacteria. In this study, AgCl/TiO2, hydroxyapatite(Hp)/AgCl/TiO2, AgI/TiO2, and Hp/AgI/TiO2 were prepared by the deposition-precipitation method on P25 TiO2 nanoparticles and were characterized by XRD, SEM, FT-IR, EDX and BET methods. The prepared composites showed high efficiency for the inactivation of Escherichia coli (E. coli) bacteria under visible light and in dark media with different catalyst amounts of 12 and 24 mg, respectively. In less than 30 min, AgI/TiO2, prepared by the combination of cationic surfactant and PVPI2, disinfected 1 × 10(7) colony-forming units of E. coli completely. However,... 

The process of self-color anodizing of titanium is done in acidic and alkaline solutions, and anodic films of different colors are formed. Results of this work show that the corrosion rate of titanium decreased after the application of an anodizing layer  

The oil-based compounds are widely used in modern human life, and the accidental release or leakage of these compounds is led to water and soil pollution and creates many problems for the environment. The purpose of this study was to determine the efficiency of photo-catalytic degradation of pyrene using Fe-doped TiO2 in the presence of UV. This experimental study was carried out at laboratory scale in a 2 L pilot reactor. The nanoparticle was synthesized by the sol-gel method. Pyrene degradation was investigated under different conditions of pH, reaction time, nanoparticle concentration and pollutant concentration. For the statistical analysis, SPSS V.16 software and one-way analysis of... 

Horseradish peroxidase (HRP) was successfully immobilized on amine functionalized TiO2-coated multiwalled carbon nanotubes (NH2 – TiO2 – CNTs) by a convenient and efficient method. Electrochemical impedance spectroscopy, cyclic voltammetry and amperometry were applied to characterize the HRP/NH2 – TiO2 – CNT nano-composite. These techniques showed that the NH2 – TiO2 – CNTs greatly enhance the electron transfer between HRP and the modified electrode. Owing to the redox reaction of the electroactive centre of HRP, the HRP = NH2 – TiO2 – CNTs modified electrode exhibited a pair of quasi-reversible peaks with a peak-to-peak separation (ΔEp) of 70.6 mV and a formal potential (E 0′) of 367.65 mV... 

Ceramic-matrix composites containing TiC-TiN have been used in a variety of application because of their superior properties such as high hardness, good wear resistance and high chemical stability. In this research, effect of coke and coke/calcium beds in synthesis of Al2O3-Ti(C, N) composites using alumino-carbothermic reduction ofTiO2 has been investigated. Al, TiO2 and active carbon with additives of extra carbon and NaCl and without additives, in separate procedures, have been mixed. Afterwards, mixtures were pressed and synthesized in 1200°C for 4hrs, in coke and coke/calcium beds, separately. Al2O3-Ti(C,N) composite was synthesized in ternary system of Al-TiO2-C with excess carbon and... 

A new counting polynomial, called Omega Ω(G,x), was recently proposed by Diudea. It is defined on the ground of "opposite edge strips" ops. Two related polynomials: Sadhana Sd(G,x) and Theta Θ(G,x) polynomials can also be calculated by ops counting. Close formulas for calculating these three polynomials in infinite nano-structures resulted by embedding the titanium dioxide pattern in plane, cylinder and torus are derived. For the design of titanium dioxide pattern, a procedure based on a sequence of map operations is proposed  

In this work, improvement in fretting fatigue life of AL7075-T6 has been investigated by titanium surface coating using ion-beam-enhanced deposition (IBED) technique and shot peening. From the experiments, the following conclusions were derived: (i) Shot peening increased the fretting fatigue life up to 350%. (ii) Titanium coating increased the fatigue life up to 100% with respect to virgin specimens for low working stresses, while it reduced the fatigue life at higher working stresses significantly. (iii) Titanium coating+shot peening increased the fatigue life up to 130% with respect to the virgin specimens for low working stresses, while it reduced the fatigue life at higher working... 

Titanium trisulfide (TiS3), a transition metal chalcogenide, bears the potential to replace silicon, when taking the form of nanoflakes, due to its favorable band gap and optical response. In this paper, we investigate the response of TiS3 nanoflakes to gas detection through a careful quantum computational approach and a few succinct measurements. The computations are benchmarked and compared with a relevant experiment at each step, where their results/conclusions are discussed. The most stable surface of TiS3 particles is determined as (001), in agreement with the literature. The adsorption of 5 gas molecules is characterized through formulating and estimating their adsorption intensity... 

In this study, titanium dioxide nano powders were electrophoretically deposited on the stainless steel in Isopropanol and Triethanolamine as a solvent and dispersant, respectively. The effects of deposition parameters including deposition voltage (5 to 20 V) and deposition time (5 to 60 s) on the microstructure and surface topography were examined by scanning electron microscope (SEM) and scanning probe microscope (SPM), respectively. In addition, the effects of these deposition parameters on packing density were investigated. This research revealed that substrate surface is fully covered with increasing deposition voltage and deposition time. Therefore packing density of deposited films is... 

We synthesized TiO2 nanoparticles by pulsed laser ablation of titanium target immersed in an aqueous solution of surfactant sodium dodecyl sulfate (SDS) or deionized water. The surfactant concentration dependence on size of TiO2 nanoparticles was investigated. The maximum amount of nanoparticles (with mean size of 40 nm in diameter) was obtained in an aqueous solution of 0.001 M SDS. We have also studied the effect of laser wavelength on growth of TiO2 nanoparticles. UV/visible spectroscopy and Scanning Electron Microscopy observations were employed for characterization of optical properties and particle sizes respectively. As TiO2 is a famous photocatalyst, we have also done photocatalytic...