Sharif Digital Repository

The microstructure evolutions of severely deformed aluminum sheets by Constrained Groove Pressing (CGP) after Friction Stir Welding (FSW) are investigated. To do so, the specimens are deformed in three different strains using CGP process which make different the initial microstructures. Then, the specimens are joined at various revolution pitches (traveling speed/rotation speed ratio) of 0.20, 0.25 and 0.33. mm/r. To understand the effect of initial strains on the properties of joints, the microhardness measurements and microstructure investigations of different areas from retreating to advancing sides of the joints are carried out. The results achieved from FSW of CGPed samples are compared... 

In the present research, different weld layers were deposited on a 1.2714 steel die by gas tungsten arc (GTA) welding with the weld wire of Udimet 520, and effects of welding parameters on microstructure and mechanical properties of Udimet 520 superalloy were investigated. The results showed Udimet 520 weld with cellular-dendritic and rarely dendritic structure including γ matrix rich of Cr, Mo and W, low percentage associated with order morphology and relative uniform distribution of MC type carbides. Udimet 520 alloy showed high resistance against hot cracking during welding and hot cracking occurred only at high input heat values. Also, cracking during welding occurred at the places that... 

In the present work tensile and tear properties of commercially pure titanium with different rolling reductions and specimens directions were investigated. The experimental results showed that in low levels of deformation the microstructure refining and mechanical twins have fewer significant effects on the anisotropic behavior of both tear and tensile properties and the crystallographic texture controls the mechanical properties anisotropy. The increase in rolling reduction up to 50% led to the formation of strong-basal texture and resulted in the activation of almost same deformation systems and isotropic mechanical response. However, at high levels of deformation, due to the split... 

Since the constitutive information is one of the most important aspects of material deformation analysis, here a new constitutive model is proposed that can investigate the behavior of material during intense deformation better than existent models. The model that is completely based on physical mechanisms can predict all stages of flow stress evolution and also can elucidate the effects of strain and strain rate on flow stress evolution of material during intense plastic deformation. Here as an application, implementation of the constitutive model in finite element method (FEM) is used to compare two methods of sever plastic deformation (SPD) processes of copper sheet; repetitive... 

A modified dislocation based model is introduced to explain the flow stress of Al-Mg alloys at different temperatures and strain rates considering solute alloying element concentration. The solute effect on flow stress is studied on the basis of storage and annihilation of dislocation. It is studied that how the increase of solute content can postpone the dislocation annihilation and how this can affect the storage phenomenon. It is found that the increasing of solute concentration can postpone the beginning of dislocation annihilation through deformation and also increase the critical strain that plateau occurs in plot of annihilation of dislocation versus shear strain. Thus, the plateau... 

A mathematical model based on Kocks-Mecking-Bergstrom model, has been proposed to predict the flow behavior of age hardenable aluminum alloys, under different conditions of solution heat treatment and hot deformation. Considering the published literature, most researchers have taken into account the precipitation and solution strengthening contribution to the flow stress by a constant and some others have ignored these effects. So these available descriptions cannot be applicable directly to different conditions of solution heat treatment. In order to enable these constitutive descriptions to take into account the effects of soaking time and temperature, we introduce in this research a...