Sharif Digital Repository

TiO2–graphene (TiO2–GR) nanocomposites were synthesized using photocatalytic reduction method. TiO2–GR nanocomposites were thereafter doped with noble metals (Pt and Pd) by chemical reduction of the corresponding cations. The samples were characterized by different techniques. The addition of GR to TiO2 decreases the crystalline size of TiO2 due to the homogeneous dispersion of the TiO2 nanoparticles on GR sheets and prevention of coagulation of TiO2 nanoparticles during synthesis process. In addition, the surface area of TiO2 was increased by addition of GR and deposition of noble metals which helps to prevent agglomeration of graphene sheets and TiO2 nanoparticles. Red shifts to the higher... 

The present work deals with a novel approach for grafting a sol-gel based sorbent, using diazonium salts for preparation of an unbreakable capillary microextraction (CME) device in on-line combination with high performance liquid chromatography (HPLC). The use of diazonium salts modifier allowed all types of metallic and non-metallic substrates to be used without any limitation. Substrates including copper, brass, stainless steel and polytetrafluoroethylene (PTFE) were chosen to be functionalized by chemical or electrochemical reduction of 4-amino phenyl acetic acid. Then, 3-(trimethoxysilyl)propylamine (3TMSPA) was selected as the precursor and the only reagent for preparation of the... 

A series of 3-cyano-2-pyridone derivatives were synthesized by one-pot four-component condensation reaction involving a benzaldehyde derivative, alkyl cyanoacetate, acyclic or cyclic ketones, and ammonium acetate in reflux condition. The X-ray structure of the products 5a and 5d confirm symmetric dimers via hydrogen bonding interactions between individual pyridine molecules showing, in addition, also π-π stacking interactions  

Indoline-2-thiones (5) were applied as 1,3-dinucleophiles in a tandem reaction with Baylis-Hillman adduct acetates (4) to give novel tetrahydrothiopyrano[2,3-b]indole skeletons (6). The effect of different solvents, bases, and catalysts on the yields and stereochemical outcome was studied in detail. The results indicated that acetonitrile as solvent and K 2CO3 as base, under reflux conditions, were the optimum conditions. Products 6a-6l were obtained in high diastereoselectivity and yield (up to 94%)  

TiO2-graphene (TiO2-GR) nanocomposites were synthesized using photocatalytic reduction method. TiO2-GR nanocomposites were thereafter doped with noble metals (Pt and Pd) by chemical reduction of the corresponding cations. The samples were characterized by different techniques. The addition of GR to TiO2 decreases the crystalline size of TiO2 due to the homogeneous dispersion of the TiO2 nanoparticles on GR sheets and prevention of coagulation of TiO2 nanoparticles during synthesis process. In addition, the surface area of TiO2 was increased by addition of GR and deposition of noble metals which helps to prevent agglomeration of graphene sheets and TiO 2 nanoparticles. Red shifts to the... 

In this article, droplet size and its distribution along a pulsed liquid-liquid extraction column, is studied where SiO2 nanoparticles with concentrations of 0.01, 0.05 and 0.1vol.% and different hydrophobicities are applied to the dispersed phase. Using ultrasonication, nanoparticles were dispersed in kerosene as the base fluid. Nanofluids' stability was ensured using a UV-vis spectrophotometer. Some 22,000 droplets were measured by photographic technique and results were compared with systems containing no-nanoparticles (Water-Acetic acid-Kerosene). Addition of nanoparticles changed the droplet shape from ellipsoidal to spherical. Also, there was a marked influence on droplet breakage and... 

Wastewater of purified terephthalic acid (PTA) from a petrochemical plant was examined in a membrane-less single chamber microbial fuel cell for the first time. Time course of voltage during the cell operation cycle had two steady phases, which refers to the fact that metabolism of microorganisms was shifted from highly to less biodegradable carbon sources. The produced power density was 31.8 mW m-2 (normalized per cathode area) and the calculated coulombic efficiency was 2.05 % for a COD removal of 74 % during 21 days. The total removal rate of different pollutants in the PTA wastewater was observed in the following order: (acetic acid) > (benzoic acid) > (phthalic acid) > (terephthalic... 

Objective: Crohn's disease (CD) is one the important illnesses can affect any part of the gastrointestinal tract. CD is not easily diagnosed using the clinical tests. Thus, the discovery of proper methods would be a major step towards CD diagnosis. The aim of this study was to seek the metabolic biomarkers causes of CD compare to control group. Materials and Methods: In present study, we employed metabolic profiling using proton nuclear magnetic resonance spectroscopy (1HNMR) to find metabolites in serum which are helpful for the diagnosis of CD. Classification of CD and healthy subject was done using classification and regression trees (CART). The metabolites that caused changes in people... 

Acetic acid is one of the most important petrochemical products. Carbonylation of methanol in homogenous phase is one of the major routes for production of acetic acid. Amongst group VIII metal catalysts used in this process iridium has displayed the best capabilities. To investigate effect of operating parameters like: temperature, pressure, methyl iodide, methyl acetate, iridium, ruthenium, and water concentrations on the carbon dioxide formation, experimental design for this system based upon central composite design (CCD) was utilized. Statistical carbon dioxide formation equation developed by this method contained individual, interactions and curvature effects of parameters on the... 

The pK a of an acyclic aliphatic heptaol ((HOCH 2CH 2CH(OH)CH 2) 3COH) was measured in DMSO, and its gas-phase acidity is reported as well. This tertiary alcohol was found to be 10 21 times more acidic than tert-butyl alcohol in DMSO and an order of magnitude more acidic than acetic acid (i.e., pK a = 11.4 vs 12.3). This can be attributed to a 21.9 kcal mol -1 stabilization of the charged oxygen center in the conjugate base by three hydrogen bonds and another 6.3 kcal mol -1 stabilization resulting from an additional three hydrogen bonds between the uncharged primary and secondary hydroxyl groups. Charge delocalization by both the first and second solvation shells may be used to facilitate... 

carbonylation of methanol in homogenous phase is one of the major routesfor production of acetic acid. Amongst group VIII metal catalysts used in this process iridium has displayed the best capabilities. To investigate effect of operating parameters like: temperature, pressure, methyl iodide, methyl acetate, iridium, ruthenium, and water concentrations on the reaction rate, experimental design for this system based upon central composite design (CCD) was utilized. Statistical rate equation developed by this method contained individual, interactions and curvature effects of parameters on the reaction rate. The model with p-value less than 0.0001 and R 2 values greater than 0.9; confirmeda... 

With respect to the influence of nanoparticles on mass transfer characteristics, limited number of studies available in the literature, deal primarily with gas-liquid systems. In this work, mass transfer performance and hydrodynamic characteristics including static and dynamic dispersed phase hold-ups of nanofluids have been investigated for pulsed liquid-liquid extraction column (PLLEC). The nanofluids used were prepared by dispersing SiO2 nanoparticles of 0.01, 0.05 and 0.1 volume percent with two different hydrophobicities in kerosene as base fluid using ultrasonication. UV-vis spectrophotometer was also used for evaluation of the nanofluids stability. The results were compared with... 

The water-gas shift reaction occurs competitively to the main reaction of the Ir-catalysed methanol carbonylation process. To study the effect of seven factors including temperature, pressure, iridium, ruthenium, methyl iodide, methyl acetate and water concentrations on the formation of hydrogen and carbon dioxide as a result of the water-gas shift reaction and other side reactions in the carbonylation of methanol to acetic acid, the experimental design method combined with response surface methodology (RSM) was utilised. Central composite design at five levels (with α=1.63) was used to design experiments. A quadratic model that included the main and interaction effects of variables for H 2... 

The electrochemical oxidation of sumatriptan on the surface of carbon paste electrode modified with multi-walled carbon nanotube and cobalt methyl-salophen complex is studied by using cyclic voltammetry and polarization studies. The results indicate that the drug is irreversibly oxidized in a one electron oxidation mechanism. It was found that the peak potential shifted negatively with increasing pH, confirms that H + participate in the oxidation process. The electrode is shown to be very effective for the detection of sumatriptan in the presence of other biological reductant compounds. The prepared modified electrode exhibits a very good resolution between the voltammetric peaks of... 

The granular activated carbon (GAC) was used as an adsorbent for its ability to remove haloacetic acids (HAAs) from drinking water by batch and column experiments. Various thermodynamic parameters, such as ΔG°, ΔH° and ΔS° have been calculated. The thermodynamics of HAAs onto GAC system indicates spontaneous and exothermic nature of the process. The ability of GAC to adsorb HAAs in a fixed bed column was investigated as well. The effect of operating parameters such as flow rate and inlet HAAs concentration on the sorption characteristics of GAC was investigated. The total adsorbed quantities, equilibrium uptakes and total removal percents of HAAs related to the effluent volumes were... 

In this study, central composite design (CCD) at five levels (-1.63, -1, 0, +1, +1.63) combined with response surface methodology (RSM) have been applied to optimise methanol carbonylation using a ruthenium-promoted iridium catalyst in a homogenous phase. The effect of seven process variables, including temperature, pressure, iridium, ruthenium, methyl iodide, methyl acetate and water concentrations, as well as their binary interactions, were modelled. The determined R 2 values greater than 0.9 for the rate and methane formation data confirmed that the quadratic equation properly fitted the obtained experimental data. The optimum conditions for maximum rate and minimum methane formation were... 

In this study, a new model of microbial fuel cell (MFC) was obtained for the first time. The modeled MFC was made using a combination of two approaches; the conduction-based method and two-step anaerobic digestion. Performance of the MFC was based on calculations for current evolution and polarization curves with different subsequent variables of the biofilm and anolyte. The model was able to make predictions for performance of the MFC for a simple substrate to more complex ones. The model was successfully validated with a variety of substrates (acetate, glucose and dairy wastewater) and the results were compared with previously published measurements. The model polarization results showed... 

In this research, a two-stage process consisting of cultivation in nutrient rich and nitrogen starvation conditions was employed to enhance lipid production in Chlorella vulgaris algal biomass. The effect of supplying different organic and inorganic carbon sources on cultivation behavior was investigated. During nutrient sufficient condition (stage I), the highest biomass productivity of 0.158. ±. 0.011. g/L/d was achieved by using sodium bicarbonate followed by 0.130. ±. 0.013, 0.111. ±. 0.005 and 0.098. ±. 0.003. g/L/d for sodium acetate, carbon dioxide and molasses, respectively. Cultivation under nitrogen starvation process (stage II) indicated that the lipid and fatty acid content... 

Introduction - Recently, there have been growing attention on the modification and optimisation of new extraction and quantification methods, caused by the lack of environmentally friendly methodologies for the extraction of phytochemicals from complex matrices. In the case of pharmaceutical compounds, not only the extraction procedure but also the analysis method should be efficient, precise, fast and easy.Objectives - The essential pharmaceutical characteristics and trace concentration of withanolides led us to modify and optimise the previously reported extraction and quantification procedure for withaferin A (WA) as a candidate for withanolides.Matrial and methods - The WA from the... 

Magnetite nanoparticles with an average particle size of 28.8 nm were synthesized, coated with oleic acid, and characterized using various techniques such as DLS, FT-IR, SEM, XRD, VSM, and UV-Vis analysis. A nanofluid consisting of synthesized nanoparticles and 5 wt % acetic acid in toluene as the dispersed phase was prepared and used in the chemical test system, Toluene-Acetic Acid-Water, for the single drop extraction in the presence and absence of an external oscillating magnetic field. Influences of various operating and design parameters such as nanoparticle concentration, drop diameter, and the applied current and frequency on the overall mass-transfer coefficients for the...