Sharif Digital Repository

A tri-layered nanofibrous hydrogel thin film with temperature sensitivity is introduced as a new controlled drug release system to treat breast cancer. A simultaneous heat generation with the tunable release of dual drugs is observed in response to visible light radiation. A tri-layered nanofibrous sheet was fabricated through sequential electrospinning the blends of Au@Chit@DOX-loaded poly(N-isopropylacrylamide-co-N-methylol acrylamide) (poly (NIPAAm-co-NMA)) and Curcumin-loaded poly (vinyl alcohol) (Cu-loaded PVA), where the Cu-loaded PVA nanofibers (NFs) are sandwiched between two layers of Au@Chit@DOX-loaded poly (NIPAAm-co-NMA) NFs. After thermal crosslinking of the tri-layered... 

In this work Halloysite nanotubes were used to synthesis a series of modified acrylamide/Quince seeds-based hydrogels (Poly (AAm-co-QS)/Haln). The as-prepared Poly (AAm-co-QS)/Haln hydrogels displayed improved performance as adsorbent in elimination of methylene blue (MB) from aqueous solution. The structures of the prepared Poly (AAm-co-QS)/Haln hydrogels were identified by XRD, FT-IR, FE-SEM, BET, TGA and EDX. Effect of pH value on the swelling behavior and dye adsorption performance of as-prepared hydrogels was explored. The adsorption MB results suggested that the adsorption kinetics fitted the pseudo-second-order model. The adsorption experiments at various pH condition indicated that... 

A high sensitive upper critical solution temperature (UCST) copolymer was synthesized through free radical copolymerization with acrylamide (AAm) and vinyl acetate (VA). The UCST behavior is due to a combination of hydrogen bonds and electrostatic potentials between copolymer chains. Turbidimetry, dynamic light scattering, and rheology studies were used to determine the phase transition and aggregation behavior. It is indicated that copolymer with 80% AAm has a phase transition temperature between 38 and 38.2 °C, which is suitable for releasing fever medicine. Also, the temperature gradient for the complete dissolution of the copolymer is 2 °C. The molecular dynamics simulations at a... 

Local three-stranded DNA/RNA hybrid regions of genomes (R-loops) have been detected either by binding of a monoclonal antibody (DRIP assay) or by enzymatic recognition by RNaseH. Such a structure has been postulated for mouse and human telomeres, clearly suggested by the identification of the complementary RNA Telomeric repeat-containing RNA “TERRA”. However, the tremendous disparity in the information obtained with antibody-based technology drove us to investigate a new strategy. Based on the observation that DNA/RNA hybrids in a triplex complex genome co-purify with the double-stranded chromosomal DNA fraction, we developed a direct preparative approach from total protein-free cellular... 

The objective of this work is to develop a new Preformed Particle Gel (PPG) suspension to enhance oil production and monitor water production in a porous medium on micromodel scale. To achieve the above goal, the following synthetic method was used. At the outset, the PPG samples were synthesized with polyethylene amine (PEI) as a crosslinker, 2,2′-Azobis (2-methylpropionamidine) dihydrochloride (AAPH) as initiator and acrylamide (AM) and 2-Acrylamido-2-methylpropanesulfonic acid (AMPS) monomers to improve the strength properties of PPGs by the radical polymerization method. Also, to characterize the micro and macro structural the samples, the scanning electron microscopy (SEM),... 

Preformed particle gels (PPGs) in solutions have been widely used to suppress excess water production in mature oil reservoirs and, in turn, to improve the amount of oil recovery in brown oil fields. In this study, PPG solutions were meticulously formulated and synthesized in order to be utilized in harsh environments in terms of pressure, temperature, pH, and salinity from a free radical polymerization process. In this work, nanosilica gel at different weight percentages was added to improve the mechanical and thermal stability properties of the PPG at harsh condition: high pressure, temperature, and strain. Moreover, the effects of nanosilica gel at various concentrations, ranging from 0.0... 

The purpose of this research is to explain the surface modification of fabricated polyamide reverse osmosis (RO) membranes using UV-initiated graft polymerization at different irradiation times (15, 30, 60, and 90 s) and various acrylamide concentrations (10, 20, and 30 g L−1). Also, coating of membranes surface with various concentrations of TiO2 nanoparticles (10, 20, 30, and 50 ppm) followed by the same UV irradiation times was investigated. After that, the membranes modification was done by grafting of acrylamide blended with TiO2 nanoparticles via UV irradiation. The characterization of membranes surface properties and their performance were systematically carried out. The results... 

The influx of solid or liquid particles of drilling mud into the pores of rock or mud loss phenomenon and clay swelling can sometimes lead to severe productive formation damage and cause to wettability alterations of reservoir rock from hydrophilic to oleophilic. Therefore, designing an appropriate fluid that is compatible with formation fluids and could reduce reservoir damage and increase the productivity of wells is very important. The two main mechanisms of surfactants are reduction of the surface tension and wettability alteration of rock reservoir that are effective in taking the oil. Regarding the importance of the wettability in reservoir productivity, this article is aimed to study... 

Deep wells suffer from the instability and disintegration of natural polymers and other commonly used additives under high pressure and high temperature condition. As a result, serious problems such as hydraulic loss, stuck pipe, and high torque and drag are expected to take place which leads to a dramatic increase in cost and time. This study presents the functionality of a novel synthetic based acrylamide-styrene copolymer (SBASC) as a supersede additive for water-based drilling mud. First, the SBASC was synthesized using an emulsion polymerization process and its particle morphological and polymer chain structural properties were determined by Field Emission Scanning Electron Microscopy... 

Scaffolds for tissue engineering of specific sites such as cardiac, nerve, and bone tissues need a comprehensive design of three dimensional materials that covers all aspects of chemical composition and physical structures, required for regeneration of desired cells. Hydrogels, possessing highly hydrated and interconnected structures, are promising materials for tissue engineering applications. Improvement of an injectable hydrogel from biocompatible polysaccharides and poly‑N‑isopropyl acryl amide enriched with Au nanoparticles are the main goal of this study. Two main enhancements in this study are included mixture design of the components and addition of Au nanoparticles to access a... 

Gels are composed of crosslinked polymer network and solvent molecules. When the main chain network is incorporated with functional groups that can undergo photo-chemical reaction upon light irradiation, the gel becomes light-responsive. Under irradiation, the photosensitive groups may undergo photo-ionization process and generate charges that are attached to the main chain or diffuse into the solvent. The newly generated ions disturb the osmotic balance of the gel medium. As a result, water molecules and mobile ions are driven into or out of the network to compensate the osmotic imbalance, which eventually leads to macroscopic swelling or shrinking of the gel. In this work, we develop a... 

The influx of solid or liquid particles of drilling mud into the pores of rock or mud loss phenomenon and clay swelling can sometimes lead to severe productive formation damage and cause to wettability alterations of reservoir rock from hydrophilic to oleophilic. Therefore, designing an appropriate fluid that is compatible with formation fluids and could reduce reservoir damage and increase the productivity of wells is very important. The two main mechanisms of surfactants are reduction of the surface tension and wettability alteration of rock reservoir that are effective in taking the oil. Regarding the importance of the wettability in reservoir productivity, this article is aimed to study... 

Background and Objective: Acrylamide as a toxic substance for human beings is produced by Maillard reaction at high temperatures. In this research, this reaction can be inhibited based on using aspariganse enzyme, controlling the cooking time and temperature during baking in yeast-leavened bread. Materials and Methods: In this study, a response surface methodology 5-level-3-factor central composite design was applied to study the effects of asparaginase (300-900 U Kg-1 of flour), baking temperature (230-280°C) and baking time (13-16 min) on acrylamide formation in yeast-leavened wheat bread. Results and Conclusion: Added asparaginase showed a reducing effect on acrylamide formation... 

In this research a novel controlled anticancer drug delivery system with dual pH and thermal responses was designed based on magnetic mesoporous silica nanoparticles that were anchored by β-cyclodextrin and coated by poly(N-isopropylacrylamide) (PNIPAM). Results demonstrated that the behavior of doxorubicin (anticancer drug) release depended on pH and temperature conditions. At endosomal pH (pH 5.5) the amount of drug release enhanced because the cap was removed from the pores. Furthermore, PNIPAM shell collapsed above the lower critical solution temperature and the releasing of drug increased. Thus, this nanocarrier would have the potential to be applied in the tumor therapy. © 2017 Taylor... 

A heterogeneous tungstate-based catalyst has been prepared for selective oxidation of sulfides to sulfoxides in the presence of 30% H2O2. The catalyst was prepared via immobilization of high amounts of WO4 2− onto the cross-linked poly(ammonium ethyl acrylamide) coated magnetic nanoparticles (MNP). FT-IR, TEM, TGA, VSM, XRD, EDX, and CHN analysis were used for characterization of catalyst. Variety of sulfides successfully converted to the related sulfoxides using 1 mol% of catalyst at room temperature in high yields. The catalyst was easily recovered and reused up to 6 times without loss of activity  

The incorporation of modified β-cyclodextrin (β-CD) into a poly(N-isopropylacrylamide) (PNIPAAm)/chitosan (PNCS) nanohydrogel was studied. β-CD was functionalized with acrylic groups, with different numbers of vinyl bonds added per β-CD molecule. The surfactant-free dispersion polymerization (SFDP) semi-batch method was used to synthesize the nanohydrogel. Increasing the number of vinyl groups per β-CDAC (β-CD acrylate) molecule induced the formation of smaller nanogels with diameters ranging from 142 to 68 nm. The cyclodextrin-modified dual-responsive nanogels obtained presented an LCST (lower critical solution temperature) in aqueous medium at around 31 C. The incorporation of β-CDAC into... 

Adsorption of Cr (VI) from aqueous solution was studied using a continuous fixed bed column which is packed with a new micro-porous composite particle developed in this study. This composite particle is composed of silica porous particle in which acrylamide is polymerized within the pore regions of the silica particles. The composite particle was supposed to maintain the mechanical properties of polyacrylamide as efficient absorbent to serve appropriately in the continuous processes. In order to enhance the adsorption capacity of the composite particle, it was modified with ethylenediamine. Scanning electron microscopy (SEM), Fourier transforms infrared spectroscopy (FT-IR) and... 

In the present work, an amperometric inhibition biosensor for the determination of sulfide has been fabricated by immobilizing Coprinus cinereus peroxidase (CIP) on the surface of screen printed electrode (SPE). Chitosan/acrylamide was applied for immobilization of peroxidase on the working electrode. The amperometric measurement was performed at an applied potential of -150. mV versus Ag/AgCl with a scan rate of 100. mV in the presence of hydroquinone as electron mediator and 0.1. M phosphate buffer solution of pH 6.5. The variables influencing the performance of sensor including the amount of substrate, mediator concentration and electrolyte pH were optimized. The determination of sulfide... 

Inclusion of nano-clays into hydrogels is an efficient approach to produce nanocomposite hydrogels. The introduction of nano-clay into hydrogels causes an increase in water absorbency. In the present work, Nanocomposite hydro-gels based on kappa-carrageenan were synthesized using sodium montmorillonite as nano-clay. Acrylamide and meth-ylenebisacrylamide were used as monomer and crosslinker, respectively. The structure of nanocomposite hydrogels was investigated by XRD and SEM techniques. Swelling behavior of nanocomposite hydrogels was studied by varying clay and carrageenan contents as well as methylenebisacrylamide concentration. An optimum swelling capacity was achieved at 12% of sodium... 

In this work, a novel method to synthesis of an acrylic superabsorbent hydrogel was reported. In the two stage hydrogel synthesis, first copolymerization reaction of acrylonitrile (AN) and acrylamide (AM) monomers using ammonium persulfate (APS) as a free radical initiator was performed. In the second stage, the resulted copolymer was hydrolyzed to produce carboxamide and carboxylate groups followed by in situ crosslinking of the polyacrylonitrile chains. The results from FTIR spectroscopy and the dark red-yellow color change show that the copolymerization, alkaline hydrolysis and crosslinking reactions have been do take place. Scanning electron microscopy (SEM) verifies that the synthesized...