Sharif Digital Repository

CO2 as a green house gas plays a significant role in the global warming and weather changes. Absorption by means of amine solutions is the main industrial technique for separating of CO2 from gas mixtures. Hazards associated with high temperature during solvent recovery, large size of equipment, corrosion, solvent degradation, and other reasons has made researchers to look for alternative processes such as adsorption. The aim of this study was to synthesis and modify the nano adsorbent for CO2 capture. To fulfill this purpose, various nano silica structures were synthesized and the amount of adsorption of each sample was determined. To investigate the performance capability nano_adsorbents,... 

Heavy metals such as lead, chromium, nickel are considered as environmental pollutants. These substances are highly toxic and dangerous to humans and other organisms at low concentrations and many problems are caused by them. Chromium belongs to the group of heavy and toxic metals. Form 6-valent chromium for humans is considered a definite carcinogen and also creates other problems. One common method of chromium removal is chemical precipitation which caused a large volume of waste. Other methods such as ion exchange, solvent extraction, reverse osmosis and biological methods are used to remove chromium. Adsorption is another effective method with very few disadvantages compared to other... 

Tehran Refinery, as an industrial center that has significant water consumption in Tehran, intends to use the flow of water from the treatment plant south of Tehran after final preparation, with the aim of managing water resources and meeting its needs. And it uses a biological activated carbon (BACF) filter to reduce the DOC concentration. In these filters, the removal of organic matter is performed by the adsorption process as well as the biodegradation process by microorganisms grown on activated carbon. The presence of biofilm leads to continuous bio-regeneration of activated carbon during the water treatment process. Therefore, in this study, by examining the performance of these... 

The search for sustainable and clean energy sources to replace fossil fuels has become one of the most important scientific and technological challenges today due to the threat of fossil fuel shortages and environmental pollution. Therefore, the need for clean energy production and storage resources, including supercapacitors, has increased day by day. Today, supercapacitors have been considered suitable for energy storage due to their high-power density, appropriate energy density, long cycle life, and high safety. The aim of the present study was to obtain activated carbon fabric as electrode material in electrochemical energy storage applications and specifically supercapacitors. The... 

In the first part of this research, for the first time, we introduced a flexible high performance graphene-based supercapacitor using silver fiber fabric as the current collector. The silver fiber fabric offers remarkable advantages such as light weight, mechanical flexibility and ease of integration with electronic textiles, which well-suited for wearable energy storage devices. A new hybrid material of graphene-silver fiber fabric (rGO/SFF) was prepared through a facile electrophoretic deposition of graphene and being used as a binder-free flexible supercapacitor electrode. In order to obtain the optimum condition, the effect of deposition time was investigated and a duration time of 10... 

Cane sugar impurities cause reduse production sugar in cane sugar industry.These impurities include polysaccharide for example starch, dextran and inorganic ash constituent such as potassium, sodium calcium magnesium and silica .The amount of impurities in the cane sugar depend on many factors including variety , grooving conditions and regional climate. Removal of impurities from cane sugar juice by clarification is an essential part of process of raw sugar manufacture. This process is based on the addition of lime, phosphates and polyelectrolyte. In this study effect of the amount of lime, phosphates and poly electrolyte on removal of various impurities has been investigated.In addition... 

Biodegradation is an effective method for removal of hazardous organic compounds such as styrene and ethylbenzene from petrochemical wastewaters. Although using this method for wastewater treatment meets (satisfies) the industrial standards, still these methods have significant disadvantages. Active sludge systems can not be effective enough due to the volatility and recalcitrance of styrene and ethylbenzene and a significant amount of volatile organic compounds exists in the discharging air. In order to reduce or totally remove this amount of pollutants in the discharging air, Membrane Bioreactors are used. One of the main problems of these systems is membrane fouling. In this thesis the... 

During fuel combustion, aromatic sulfur compounds in energy fuels convert into sulfur oxides, which cause major environmental problems such as acidic rain, global warming, and air pollution. Absorption desulfurization is one of the promising and economical methods to remove these sulfur compounds from fuels. Metal-organic frameworks (MOFs) are a class of nanoporous materials that are of interest for use as adsorbents due to their high specific surface area, unique surface adsorption properties, high adsorption capacity, tunable porosity, flexible dynamic behavior, and diversity in functional and metal groups. In this research, we first synthesized five metal-organic frameworks, namely... 

Adsorption of acetone vapors on mixture of silica gel and activated carbon was studied. Adsorption is defined as the attraction adsorbate (liquid or gas) particles onto the surface of a solid (porous solid). Most of the experimental works are adsorption of a one or more component on an adsorbent. Presence of two or more adsorbents together may effect on adsorption rate, uptake and thermodynamic conditions. When we have limitation in using a kind of adsorbent, these results can be helpful. There are several motivating reasons for the study of adsorption on adsorbent mixtures. During the adsorbent manufacturing process, multiple batches may differ slightly from each other(and from the customer... 

Nowadays, increased pollutants in the air threat the society health condition and Volatile Organic Compounds (VOCs) are the most hazardous ones among them. In the present study, catalytic oxidation as a prominent of the VOCs removal method from air, have attracted attentions due to high removal efficiency and suitable kinetic reaction. Because of its common industrial applications, toluene is intended to be eliminated through a low cost carbon supported catalyst which is synthesised in the laboratory. Construction method, carbonaceous support type, catalyst metal and its load, calcination temperature and time are among influencing design characteristics. A combination of Impregnation and... 

In the present thesis, the adsorption ability of the functionalized magnetic nano-particles supported on the walnut and almond based activated carbons was evaluated to prepare the efficient and low cost adsorbents for removal of Pb(II), Cr(VI) and Hg(II) ions aqueous solutions in the presence of salinity. The activated carbons were derived from almond and walnut shell by the physical activation method. The functionalized nano-magnetic activated carbons were synthesized by co-precipitation consisting of AC(almond)@Fe3O4@SiO2-NH2-COOH and AC(walnut)@Fe3O4-NH2-COOH which were modified by the oxygen containing functional groups to enhance the adsorption capacity. The prepared carbonaceous... 

The amount of fresh water suitable for various uses is decreasing day by day. This may be due to evaporation or contamination of water or such. Heavy metal cations, dyes, oils and solvents are the most important substances that contaminate water. There are various ways to remove these contaminants, one of which is the absorption of these substances by suitable absorbents. Carbon compounds have attracted much attention among all the absorbents used so far. The aim of this study is to produce carbon aerogels from an economic and modify its structure and properties by adding graphene nanosheets. In this study, Novalak-graphene oxide (GO) gel was fabricated using solvent-saturated vapor... 

The progress and the development of various industries, pollutants derived from the agricultural and industrial processes contaminate the environment. The degradation of these pollutants have an important effect on the environment.Magnetite (Fe3O4) nanoparticles and magnetite supported on functionalized activated carbon were synthesized and characterized by different techniques such as SEM, FT-IR, XRD, BET and VSM. The catalyst activity of these nanocatalysts was evaluated by the degradation of reactive red ME4BL (RRME4BL) textile dye in heterogeneous Fenton and electro-Fenton processes as a model pollutant. The effect of several parameters such as H2O2, RRME4BL concentration, the amount of... 

In this research performance of microbial fuel cells (MFCs) in continuous flow mode was studied. Different anodic chambers were tested and it was found that granular activated carbons (GACs) produced the highest power density (1228 mW/m3) in comparison with multiple anodes (731 mW/m3), single anode (294 mW/m3) and polymeric packings (40 mW/m3). It was also shown that in a plug-anodic chamber (PAC) the power output is reduced by reducing agitation of anodic volume. Adding more GACs to anodic chamber results in power increase, however by increasing occupied volume from 80% to 100% the power increase was negligible in result of cathodic reactions limitations. Feed flowrate was increased from... 

Activated carbon, as an adsorbent with a high adsorption capacity and low cost, has many applications in liquid and gas adsorption processes. Among the adsorption of liquid phase, there are examples of drinking water purification, wastewater treatment, food industry, brewery, chemical separation (acids, amines, glycerin and glycols), enzymes ... and in adsorption from the gas phase there are examples of removing toxic compounds Containing sulfur and recycling sulfur, purifying biogas, use in gas masks, etc. Various materials can be used as raw material to make activated carbon. Materials such as walnut, almonds, coconut, pine, corn, etc. In this thesis, a feasibility study on the production... 

One of the methods for adsorption of natural gas that has economical, operational and environmental preferences as an alternative energy source is storage as an adsorbed phase in porous material. ANG is superior to CNG and LNG technologies in terms of economy and safety. Carbonaceous nanostructures with pore diameter of 0.8-1.4 nm can be proper adsorbents for methane adsorption. In this work, cellulose and lignin which form lignocellulosic material’s structure, has been used as precursor for producing activated carbon. The activated carbon prepared has been used as adsorbent for adsorption of methane. The use of hydrothermal pretreatment followed by carbonization and chemical activation is... 

Pure NanoParticles of TiO2 and Nanocomposite catalysts of TiO2 , activated carbon (TiO2/AC) and multi-walled carbon nanotube (TiO2/MWCNT) were prepared by a sol –Gel method using TetraisoPropylorthotitanat (Tipt) as a precursor. The catalysts were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), diffuse reflectance uv-vis spectroscopy (DRS) and N2 adsorption – desorption measurements. The photoactivity of samples was evaluated by Acid Blue 92 (AB 92) degradation. The analysis results show that compared with pure Nanoparticles of TiO2, the spherical – shaped TiO2 particles are well – dispersed in TiO2/AC. In TiO2/MWCNT, the coating has special mechanism that... 

The major obstacle in using natural gas as a clean and abundant fuel in transportation industries is the low density of energy obtained from its combustion. Adsorbed Natural Gas (ANG) is a useful method to increase the energy density and store the natural gas. The lower cost and higher safety have made it different from the other storage technologies. In addition, ANG can be useful to solve the lack of gas in the peak of consumption. Among all adsorbents, Activated Carbon (AC) has shown the highest adsorption capacity of natural gas. In the present project, walnut shell has been used as the precursor in the chemical synthesise of AC. The main effective factors in chemical activation, such as... 

Emission of aromatic and aliphatic compounds to atmosphere is a major environmental concern for many urban societies. Catalytic oxidation of volatile organic compounds (VOCs) is an efficient and low operating cost technology for reduction of air pollution.
First, dispersed copper oxide nano-catalysts supported on almond shell-based activated carbon were prepared for catalytic oxidation of toluene in air. The Response Surface Methodology (RSM) was used to express the catalyst removal efficiency in terms of catalyst metal loading and calcination temperature. Calcination temperature had a significant effect on the catalyst activity only at high metal loadings (upper 8% wt.). Two different... 

In this study, granular activated carbon has been modified by potassium nickel hexacyanoferrate ( KNCF), sodium dodecyl sulfate(SDS) and ammonium per sulfate(APS) as new adsorbents for cesium, cobalt and chromium(VI), respectively. The prepared adsorbents were characterized using powder X-ray diffraction(XRD), nitrogen adsorption-desorption isotherm data, infrared spectroscopy, scanning electron microscopy coupled with energy dispersive spectroscopy(SEM-EDS) and their adsorption performance were investigated. The effect of various parameters like the initial pH value of the solution, contact time, temperature, strength ionic of the solution, interference ions and the initial concentration of...