Sharif Digital Repository

In this paper, different injectivity scenarios were experimentally investigated in a coreflooding system to observe the efficiency of each method in laboratory conditions. Surfactant flooding, CO2 injection, carbonated water injection (CWI), active carbonated water injection (ACWI), after water flooding were investigated through the coreflooding system. First, it is necessary to optimize the surfactant concentration and then use it in ACWI injection. To do this, linear alkylbenzene sulfonic acid (LABSA) was used as a cationic surfactant at different concentrations. It was observed that 0.6 PV concentration of LABSA had an optimum result as increasing the surfactant concentration would not be... 

The feasibility of employing the biological activated carbon (BAC) process to debilitate azo dye Carmoisine by Klebsiella spp. was investigated. Plate assay revealed the capability of Klebsiella spp. for removal of Carmoisine via degradation. Kinetic parameters were measured for Carmoisine debilitation by Klebsiella spp. using the suspended anaerobic process. Two types of granular and rod-shaped activated carbon were used to form the biological beds in order to study the Carmoisine debilitation in batch processes. Scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) were used to indicate the colonization and biofilm formation of bacteria grown on activated carbon... 

Carbonaceous materials (CMs) have been applied extensively for enhancing the catalytic performance of environmental catalysts, however, the self-catalytic mechanism of CMs for groundwater remediation is rarely investigated. Herein, we unveiled the catalytic ability of various CMs via Fe(III) reduction through polyvinyl alcohol-coated calcium peroxide nanoparticles (PVA@nCP) for trichloroethylene (TCE) removal. Among selected CMs (graphite (G), biochar (BC) and activated carbon (AC)), BC and AC showed enhancement of TCE removal of 89% and 98% via both adsorption and catalytic degradation. BET and SEM analyses showed a higher adsorption capacity of AC (27.8%) than others. The generation of... 

Carbonaceous materials (CMs) have been applied extensively for enhancing the catalytic performance of environmental catalysts, however, the self-catalytic mechanism of CMs for groundwater remediation is rarely investigated. Herein, we unveiled the catalytic ability of various CMs via Fe(III) reduction through polyvinyl alcohol-coated calcium peroxide nanoparticles (PVA@nCP) for trichloroethylene (TCE) removal. Among selected CMs (graphite (G), biochar (BC) and activated carbon (AC)), BC and AC showed enhancement of TCE removal of 89% and 98% via both adsorption and catalytic degradation. BET and SEM analyses showed a higher adsorption capacity of AC (27.8%) than others. The generation of... 

Activated carbon (AC) is an inert adsorbent material that has widely been used in water treatment or removing of environmental pollutants from water. In order to improve the adsorption of AC, which highly depends on its pore size and surface area, we prepared highly porous adsorbent composites of activated carbon (AC)/chromium-based MOF (MIL-101(Cr)). The composite has a high specific surface area of 2440 m2 g−1 and total pore volume of 1.27 cm3 g−1. To show the efficiency of the composite as an adsorbent, the removal kinetics of anionic dyes (Direct Red 31 and Acid Blue 92) from aqueous solutions dependent on the amount of composite, adsorption time, concentration of dye and pH is... 

The oxidation-precipitation method was used for the synthesis of Fe3O4/AC. The characterization of the catalyst was accomplished by XRD, FT-IR, FE-SEM, BET, and VSM techniques. The obtained results indicated that magnetite nanoparticles were successfully prepared with cubic spinel structures and uniform distribution on the surface of activated carbon by the oxidation-precipitation method. The effect of operating parameters was evaluated to determine the optimum operating condition for the electro-Fenton (EF) removal of catechol as a phenolic pollutant model. At the optimum operating conditions (pH 3, Fe3O4/AC: 0.9 g L−1, Catechol: 8.0 × 10−4mol L−1 at I: 120 mA), the catechol and COD removal... 

Supported Pt–TiO₂ photocatalysts on carbonaceous supports were synthesized by the electrostatic self-assembly method to study CO₂ photoreduction to produce CH₄. Catalytic activities of the prepared photocatalysts were correlated with the particle size and dispersion of the active metal, which in turn depended on the type of carbonaceous support used, varying in the order of multi-walled carbon nanotubes (MWCNT) > Single-walled carbon nanotubes (SWCNT) > reduced graphene oxide > activated carbon. Generally, all catalysts were highly photoresistant with less than 5% loss of activity in terms of CH₄ yield. Pt–TiO₂/multi-walled carbon nanotubes exhibited better catalytic activity compared with... 

This study aims to enhance biological nitrogen removal performance by the innovative carbon-based carriers. The new carriers were produced based on recycling waste materials. In these carriers, the advantages of the hybrid system and physicochemical properties of activated carbon were integrated to promote microbial attachment. To verify the performance of the new carriers compared to the conventional moving carriers, the experiments were conducted in two parallel laboratory-scale sequencing batch reactors under various operating conditions. The analysis revealed that the specific surface area of the new carrier with a total pore volume of 0.0015cm3/gr was 10.9 times the specific surface... 

Developing advanced electrode materials with metal–organic frameworks (MOFs) has increasingly attracted attentions as an effective method for improving supercapacitors performances. However, their poor conductivity has limited their use in energy applications. In this paper, an effective strategy is presented to reduce the electric resistance of MOFs by the in situ synthesis of Ni-based MOFs with graphene (Ni-MOF/graphene). The fabricated Ni-MOF/graphene composite was characterized by powder X-ray diffraction (PXRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR), Raman spectra, Brunauer–Emmett–Teller (BET) and... 

In the present work, N-rich activated carbon was synthesized using hydrothermal carbonization of egg white biomass in the presence of sucrose, followed by chemical activation and magnetization of hydrochar in the presence of iron (II) and (III) at NaOH solution. The results showed that the sucrose has a critical role in hydrochar yield by increasing of sucrose content. This claim also proved by SEM analysis, which hydrochar morphology was changed from the layered to fused carbon spheres morphology that confirmed the increasing of nucleation site. The materials were characterized with VSM, SEM, CHN, FTIR, Raman spectroscopy and XRD techniques. Capacity of prepared magnetic activated carbon... 

The chitosan/poly vinyl alcohol membrane was modified by addition of some amine group to the membrane structure utilizing polyethyleneimine (PEI) in order to increase ionic metals adsorbent properties of the membrane. The removal percentage of the modified membranes was compared with the pristine membrane and activated carbon as common adsorbents. The membranes were characterized by FTIR, SEM, swelling degree and porosity measurement. The removal percentage of the membrane containing 0.5 wt.% PEI was more than 60% higher than the activated carbon and more than 40% higher than the pristine membrane. The modified membrane showed excellent adsorption capacity of 112.13, 86.08, and 75.5 mg/g for... 

Herein, Kiwi peel activated carbon (AC), Materials Institute Lavoisier (MIL-88B (Fe), and AC/MIL-88B (Fe) composite were synthesized and used as catalysts to degrade Reactive Red 198. The material properties were analyzed by the FTIR, BET-BJH, XRD, FESEM, EDX, TGA, and UV–Vis/DRS. The BET surface area of AC, MIL-88B (Fe) and AC/MIL-88B (Fe) was 1113.3, 150.7, and 199.4 m2/g, respectively. The band gap values (Eg) estimated by Tauc plot method, were obtained 5.06, 4.19 and 3.79 eV for AC, MIL-88B (Fe) and AC/MIL-88B (Fe), respectively. The results indicated that the AC/MIL-88B (Fe) composite had higher photocatalytic activity (99%) than that of pure AC (79%) and MIL-88B (Fe) catalysts (87%).... 

The synthesis of cheap and environmental friendly adsorbent from residual sugarcane bagasse was done for the removal of naphthalene from aqueous solution. The activated carbon dot was obtained by KOH chemical activation of carbon dots. The characteristics of carbon dots and activated carbon dots were determined using field emission scanning electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, and thermogravimetric analysis. A series of experiments were conducted in a batch system to assess the effect of the system variables, i.e., initial pH, initial naphthalene concentration, adsorbent dosage, and contact time. The kinetic data showed better fit to the... 

In this study, dynamic adsorption behavior of different gaseous volatile organic compounds (VOCs) on a new modified M-MIL-101(Cr) was investigated with a great emphasis on gasoline adsorption. The M-MIL-101(Cr) was synthesized, along with comprehensive purification procedures, using a new linker to cluster molar ratio (2:1 instead of 1:1) and different modulators (i.e. HF and HNO3). All prepared adsorbents were characterized by XRD, FTIR, FE-SEM and N2 adsorption-desorption at 77 K. The results showed that surface area and pore volume of the M-MIL-101@Free (i.e. modified MIL-101(Cr) with using any modulator) which were 4293 m2/g and 2.43 cm3/g, greatly elevated up to 37.2% and 71.6% against... 

An efficient, novel functionalized supported magnetic nanoparticle (AC@Fe3O4-NH2-COOH) has been synthesized by co-precipitation method for removal of mercury ions from saline solutions. High dispersed supported magnetic nanoparticles with particle sizes less than 30 nm were formed over activated carbon derived from local walnut shell. Surface characterizations of supported magnetic nanoparticles were evaluated by Boehm test, Brunauer- Emmett-Teller (BET) surface area, X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and X-ray fluorescence (XRF). A three-layer artificial neural network (ANN) code... 

Adsorption ability of prepared magnetic nanoparticles supported on activated carbon (AC-MNPs) was evaluated to synthesize an efficient and a low cost adsorbent for removal of Pb(II) and Cr(VI) ions from single and binary component aqueous solutions in the presence of salinity. Magnetic adsorbent was prepared by co-precipitation over activated carbon derived from almond shell by physical activation method. AC-MNPs was modified by oxygen containing functional groups to enhance the adsorption capacity of adsorbent. XRD, XPS, BET, Boehm, TEM, FT-IR, DLS and XRF were used to characterize the AC@Fe3O4@SiO2-NH2-COOH. Characterization analyses indicated the high dispersion of Fe3O4 crystallites on... 

Owning to interesting properties of biosurfactants such as biodegradability and lower toxicity, they have broad application in the food industry, healthy products, and bioremediation as well as for oil recovery. The present study was aimed to develop a GA-ANFIS model for predicting the breakthrough curves for rhamnolipid adsorption over activated carbon. To that end, a set of 296 adsorption data points were utilized to train the proposed FIS structure. Different graphical and statistical methods were also used to evaluate the model's accuracy and reliability. Results were then compared to those of the previously reported Artificial Neural Network (ANN) and Group Method Data Handling (GMDH)... 

Liquid phase hydro-purification of crude terephthalic acid (CTA) was performed using supported Pd and Pd-Sn catalysts on functionalized multi-wall carbon nanotubes (FMWCNT). Pd/FMWCNT catalysts were prepared by wet impregnation with Pd loadings of 0.05 to 0.6 wt.%. Pd-Sn/FMWCNT catalysts were prepared by co-impregnation (CI) and successive impregnation (SI) using 0.3 wt.% Pd loading and Sn/Pd molar ratios of 0.1 and 0.35 for the CI method and 0.05 to 0.35 for the SI method. Pd loading of 0.3 wt.% for Pd/FMWCNT was sufficient to decrease the 4-carboxybenzaldehyde (4-CBA) content of CTA from 2100 ppm to 5.5 ppm without excessive hydrogenation of terephthalic acid (TA). The commercial catalyst... 

Palladium nanocatalysts supported on reduced graphene oxide (rGO), multi walled carbon nanotubes (MWCNT), and rGO/CNT composite were synthesized by a wet impregnation method using PdCl2 as a precursor. Palladium loading was 0.3 wt %, and the catalysts were reduced at 300°C. The catalysts were characterized by inductively coupled plasma, Brunauer-Emmett-Teller (BET) analysis, Fourier transform infrared spectroscopy, X-ray powder diffraction, transmission electron microscopy, temperatue-programmed reduction, temperatue-programmed desorption, and Raman spectroscopy. The performance of the catalysts was investigated for hydro-purification of crude terephthalic acid (CTA) containing... 

Low cost dispersed supported cobalt oxide nanocatalysts on activated carbon (AC) were prepared by two different methods: (1) combined impregnation and deposition–precipitation (IMP-DP) and (2) heterogeneous deposition–precipitation (HDP). XRD, TEM, FESEM, BET and Boehm techniques were used for the characterization of the support and the catalysts. Characterization analyses indicated the negative effect of the wet impregnation method on the IMP-DP technique for the preparation of catalysts for the total oxidation of cyclohexane in air. The catalysts prepared by HDP and IMP-DP methods were found to have significant differences in oxidation activity, morphology, particle size, and shape of...