Sharif Digital Repository

A major environmental challenge for wastewater treatment in Iran and other countries is the disposal of excess sludge produced during the biological process. This project has been developing and testing a technology that will help to overcome this challenge in Kish Island wastewater plant. Results demonstrate it can perform highly effective treatment of municipal wastewater while producing low levels of sludge.Applicationofvermifiltrationfor treatment of wastewater sludge using the Eiseniafetida earthworm species. The earthworms’ gut acted as a biofilter whereby there was reduction in the sewage wastewater’s solid and liquid organic and inorganic wastes through ingestion and expelling these... 

An increase of wastewater treatment plants and wastewater treatments methods have increased the importance of selection of best wastewater treatment alternative. This selection should not be merely based on the quality of effluent, but the whole factors (economic, environmental, technical and social factor) should be considered. Different methods for the assessment of wastewater treatment plants is used. For example, life cycle assessment is used for the evaluation of environmental impacts or cost-benefit analysis are used for economic analysis. But, for selection of the most sustainable technology whole factors should be evaluated together. Multi-criteria decision-making methods can be... 

The best method for stabilizing sludge is anaerobic digestion, In addition to reducing the amount of volatile solids; it produces biogas, which can be considered as a sustainable energy source for wastewater treatment plants. However, the most important factor limiting the process of digestion is the sludge hydrolysis, the best way to increase the speed of hydrolysis is to pre-treatment the sludge before entering the digester; One of the most effective pretreatment methods is pre-treatment by ozone gas, This gas, which is highly unstable, quickly reacts with the wall of the bacterial cell and oxidizes it due to its high oxidizing properties And accelerates the process of sludge hydrolysis.... 

Clean water is a growing need for humanity all around the Earth. Due to the shortage of clean water resources in most parts of our planet, wastewater treatment and reuse has been of great value in past decades. Much research has been conducted to improve treatment systems. One of the most recent advancements in water and wastewater treatment field is application of membrane bioreactor systems. Despite many advantages of these systems, membrane fouling has been the main drawback since the creation and application of them. The main objective of this research is to investigate the probable fouling reduction and head loss in flat sheet UF membranes due to the application of an anaerobic... 

In this study, the use of a fixed bed of the Kaldnes commercial carrier in the activated sludge system has been investigated. In this way, at zero time, a submerged fixed bed of Kaldnes was placed into a completely mixed activated sludge reactor and its various parameters were investigated during the time. During the experiment, the fixed bed (Kaldnes carriers enclosed in a lace) with 20, 35 and 50 percentage of volumes were compared to regular activated sludge reactors (without any carriers). The studied parameters are COD, DO, MLSS, and P-PO43-. Input COD was changed at concentrations of 1200 and 400 mg/L, and the reactor hydraulic time was adjusted to 10 and 16 hours. It was observed that... 

Eutrophication and algae growth is one of the consequences of high concentration of nutrients in surface water bodies; therefore, both phosphorus and nitrogen existing in wastewater or at least one of them should be decreased to a standard amount before entering water to rivers. This can prevent eutrophication and detriment to the ecosystem of rivers. An investigation on both biological and chemical phosphorus and carbon removal in low loading rate influent ( below 100) has been carried out in this research. Investigated topics includes aerobic COD removal in IFAS reactor, comparison of biological nutrient removal to the combination of chemical and biological method, effect of the order of... 

If wastewater is not properly treated, then the environment and human health can be negatively impacted. These impacts can include harm to fish and wildlife populations, oxygen depletion and contamination of drinking water. In the typical wastewater treatment process, the goal of primary, secondary and tertiary effluent treatment is to reduce or remove organic matter, solids, nutrients, disease-causing organisms and other pollutants from the treated wastewater before it is discharged to a body of water. Biological methods for wastewater treatment are much preferable for being more economical and environmentally friendly. Biological treatment of wastewater using algal-bacterial culture... 

Phenolic compounds are hazardous pollutants that are released into environment through wastewater discharges from variety of industries. Although good biodegradability has been reported at low concentrations, but at higher concentrations phenols are known to be antibacterial. In this study the Membrane Biological Reactor (MBR) with submerged hallow fiber membrane was operated at 25±2 ºC and pH=7.5±0.5 to treat a synthetic wastewater containing high phenol concentration (up to 5.9 g/l). Removal efficiency of phenol and COD were evaluated at four various “Hydraulic Retention Times” (HRT) of 24, 12, 8 and 4 hours. To test the tolerance of the bioreactor to phenol concentration various loading... 

Activated sludge systems are widespread biological wastewater treatment systems that have a very complex and nonlinear dynamics with a wide range of time constants and, as a consequence, are difficult to model and control. On the other hand, using neural networks as function approximators has provided a reliable tool for modeling complex dynamic systems like activated sludge. In this study a multi-input multi-output neural network model predictive controller (NNMPC) is developed and tested based on the basic control strategy of a benchmark simulation model (called BSM1) suggested by european co-operation in the field of science and technical research (COST) actions 682/624. The controller... 

In this study the performance of the conventional activated sludge and the membrane bioreactor systems were investigated and their operations were compared. . A membrane bioreactor and a conventional activated sludge system which includes one aeration basin and one settling tank were designed and constructed. The feed was synthetic and the BOD:N:P ratio was 100:5:1. In order to starting the systems, the sludge supplied from the municipal wastewater treatment plant and inoculated. Then, the inoculated sludge was adapted to treat the starch wastewater with step by step increasing the feed COD. . The performance of two systems investigated in inlet COD=2500 mg/L and four hydraulic retention... 

Oil refineries, petrochemical factories and oil platforms produce a large amount of oily wastewater every day. If these wastewaters are released in environment, it can damage soil and water seriously. Although, Biological treatment of oily wastewaters is a well-established method for remediation of these wastes, efficiency of conventional systems such as Activated Sludge, aren’t very high. Also these systems have many problems such as instability during hydraulics shocks and bulking phenomena. the hybrid bioreactor system are designed to increase the efficiency of treatment by allowing greater organic loads, increasing microbial concentration by using attached and suspended bacteria, and... 

This study deals with the treatment of medium density fiberboard (MDF) effluent aiming at the removal of TSS, COD, BOD and Turbidity by means of soil aquifer treatment (SAT). Removal of parameters were evaluated during transport of MDF effluent under unsaturated flow conditions in 1-m soil (sandy-clay soil) depth. The experimental results showed that the new process with SAT to be very effective. The TSS, COD, BOD and turbidity removal average was about 99%, 30%, 89 and 98.5% at the optimum operation condition, respectively. The SAT should be added before the UASB in order to achieve high removal rate of COD and BOD. The UASB (concentration sludge 40000 mg/l) after SAT treatment MDF...