Sharif Digital Repository

A non-collimated gamma spectroscopy with fewer sampling (counting) and shorter sampling periods is developed and used to estimate the concentration profile of the radiotracers within the column. In this method, the radiotracer activity in the whole column is measured in a few different positions of the detector and then, by using an appropriate advection-dispersion model and the genetic algorithm, the concentration profile within the column is constructed. The concentration profile obtained by the new method fits very well to the experimentally obtained thin-section scanning results with RMSE less than 0.046. The uniqueness of the concentration profile obtained by the method was confirmed by... 

In this paper, a two dimensional numerical model for two phase flow is presented. For interface tracking, the FGVT-VOF (Fine Grid Volume Tracking-Volume Of Fluid) method is selected. For momentum advection, an improved approach is used. In this scheme, a volume tracking step is coupled with steps of computations for the advection of momentum. A Reynolds stress algebraic equation has been implemented in the algorithm of turbulent modeling. Standard test cases are used for the verification of interface tracking and hydrodynamic modeling in laminar and turbulent conditions. The test results show that this methodology can be used in different applications of two-phase flow modeling. © Sharif... 

In this paper, transient depressurization of high pressure pipelines containing initially subcooled liquid is simulated numerically by using thermodynamic non-equilibrium and choking condition model. The numerical method relies on finite volume. The convective terms of cell boundaries are discretized by Advection Upstream Splitting Method (AUSM+ - up) with a proposal of partially implicit approach for source terms. Different void fraction correlations are applied to simulate two phase shock tubes as well as the depressurization process. By comparison between the present results and previous experimental data, the best void fraction correlation is introduced. The results indicate that the... 

Compressible turbulent flow through the abrupt enlargement in pipes is studied numerically by means of Advection Upstream Splitting Method (AUSM+-up). In low Mach numbers, a pressure correction equation of elliptic type is derived. This equation is compatible with the nature of governing equations and retrieves hyperbolic characteristic at higher Mach numbers. It is shown that the proposed numerical algorithm is computationally more efficient than the preconditioned density-based methods. The flow parameters such as reattachment length, pressure loss coefficient and wall shear stress are predicted. It is found that the loss coefficient of the compressible flow rises drastically with... 

The objective of this study is to calibrate Priestley-Taylor (PT) model for estimating open water evaporation from an arid region reservoir called Chahnimeh. Chahnimeh Reservoir which is situated in the Sistan area in the southeast of Iran is being affected by regional energy advection during May to October. Therefore, common models of open water evaporation estimation such as PT require calibration. PT method was calibrated for Chahnimeh Reservoir using a volume balance method. Results showed that PT coefficient, αPT, as a constant over the year varies between 2.47±0.09 and 1.20±0.03 for two different hydrologic conditions of dry and wet. It means that there is also an intra-annular... 

The finite-volume methods normally utilize either simple or complicated mathematical expressions to interpolate the fluxes at the cell faces of their unstructured volumes. Alternatively, we benefit from the advantages of both finite-volume and finite-element methods and estimate the advection terms on the cell faces using an inclusive pressure-weighted upwinding scheme extended on unstructured grids. The present pressure-based method treats the steady and unsteady flows on a collocated grid arrangement. However, to avoid a non-physical spurious pressure field pattern, two mass flux per volume expressions are derived at the cell interfaces. The dual advantages of using an unstructured-based... 

Bioremediation of soil and groundwater sites contaminated by petroleum hydrocarbons is known as a technically viable, cost-effective, and environmentally sustainable technology. The purpose of this study is to investigate laboratory-scale bioremediation of petroleum-hydrocarbon contaminated soil through development of eight bioreactors, two bioreactors for each bioremediation mode. The modes were: (1) natural attenuation (NA); (2) biostimulation (BS) with oxygen and nutrients; (3) bioaugmentation (BA) with hydrocarbon degrading isolates; (4) a combination of biostimulation and bioaugmentation (BS-BA). Total petroleum hydrocarbons (TPH) mass balance over the bioreactors showed about 2% of... 

In this paper, we propose using mobile nanosensors (MNSs) for early stage anomaly detection. For concreteness, we focus on the detection of cancer cells located in a particular region of a blood vessel. These cancer cells produce and emit special molecules, so-called biomarkers, which are symptomatic for the presence of anomaly, into the cardiovascular system. Detection of cancer biomarkers with conventional blood tests is difficult in the early stages of a cancer due to the very low concentration of the biomarkers in the samples taken. However, close to the cancer cells, the concentration of the cancer biomarkers is high. Hence, detection is possible if a sensor with the ability to detect... 

In this paper, the numerical errors associated with the finite difference solutions of two-dimensional advection-dispersion equation with linear sorption are obtained from a Taylor analysis and are removed from numerical solution. The error expressions are based on a general form of the corresponding difference equation. The variation of these numerical truncation errors is presented as a function of Peclet and Courant numbers in X and Y direction, a Sink/Source dimensionless number and new form of Peclet and Courant numbers in X-Y plane. It is shown that the Crank-Nicolson method is the most accurate scheme based on the truncation error analysis. The effects of these truncation errors on... 

Urmia Lake, located in a closed basin in north-west Iran, is the largest lake (5000-6000 km2) in the Middle East. It is very saline with total dissolved salts reaching 200 g/l compared with a normal seawater salinity of about 35 g/l. The construction of a causeway, which was initiated in 1979 but then abandoned until the early 2000s, is near completion and will provide road access between the western and eastern provinces. The causeway has an opening 1.25 km long and divides Urmia Lake into a northern and southern basin and restricts water exchange. The flow and salinity regimes are affected by the presence of this new causeway, and there are concerns over the well being of the Artemia... 

The hydraulic efficiency of sedimentation basins is reduced by short-circuiting, circulation zones and bottom particleladen jets. Baffles are used to improve the sediment tank performance. In this study, laboratory experiments were used to examine the hydrodynamics of several baffle configurations. An accompanying numerical analysis was performed based on the 2-D Reynolds-averaged Navier-Stokes equations along with the k-ε turbulence closure model. The numerical model was supplemented with the volume-of-fluid technique, and the advection-diffusion equation to simulate the dynamics of particle-laden flow. Model predictions compared well with the experimental data. An empirical function was... 

We extend a hybrid finite-volume-element (FVE) method to treat the laminar reacting flow in cylindrical coordinates considering the collocation of all chosen primitive variables. To approximate the advection fluxes at the cell faces, we use the upwind-biased physical influence scheme PIS and derive a few new extended expressions applicable in the cylindrical frame. These expressions are derived for both the Navier-Stokes and reactive flow governing equations, of which the latter expressions are considered novel in the finite-volume formulation. To validate our derived expressions, the current results are compared with the experimental data and other available numerical solutions. The results... 

Combining the advection-diffusion equation approach with Monte Carlo simulations we study chaperone driven polymer translocation of a stiff polymer through a nanopore. We demonstrate that the probability density function of first passage times across the pore depends solely on the Péclet number, a dimensionless parameter comparing drift strength and diffusivity. Moreover it is shown that the characteristic exponent in the power-law dependence of the translocation time on the chain length, a function of the chaperone-polymer binding energy, the chaperone concentration, and the chain length, is also effectively determined by the Péclet number. We investigate the effect of the chaperone size on... 

In the present study a finite difference method has been developed to model the transient fluid flow and heat transfer. A single fluid has been selected for modeling of mold filling and The SOLA-VOF 3D technique was modified to increase the accuracy of simulation of filling phenomena for shape castings. The model was then evaluated with the experimental methods. Refereeing to the experimental and simulation results a good consistency and the accuracy of the suggested model are confirmed. © 2005 Published by Elsevier B.V  

The duct inverse design in fluid flow problems usually involves finding the wall shape associated with a prescribed distribution of wall pressure or velocity. In this investigation, an iterative inverse design method for 2-D subsonic ducts is presented. In the proposed method, the duct walls shape is changed under a novel algorithm based on the deformation of a virtual flexible string in flow. The deformation of the string due to the local flow conditions resulting from changes in wall geometry is observed until the target shape satisfying the prescribed wall's pressure distribution is reached. The flow field at each step is analysed using Euler equations and the advection upstream splitting... 

A numerical code for supersonic intake design with a proper simulation of the normal and/or oblique shocks, boundary layer development, interaction of the shock and the boundary layer, as well as prediction of the flow separation is of great help to the designers. In this research, a numerical code is developed to solve the inner and outer flow fields of the intake and validated with various experimental tests. The intake is an axisymmetric external compression one. Roe scheme and new schemes, AUSM+-up (for all speed) and Advection Upstream Splitting Method with Pressure-Based Weight function (AUSMPW), are used to compute the convective fluxes. The original version of the AUSMPW scheme has... 

Low salinity waterflooding (LSWF) is a process in which by lowering the ionic strength and/or manipulation of the composition of the injection water, the long term equilibrium in oil/brine/rock system is disturbed to reach a new state of equilibrium through which the oil production will be enhanced due to fluid/fluid and/or rock/fluid interactions. In spite of recent advances in the simulation of the LSWF at core scale and beyond, there are very few works that have modelled and simulated this process at the pore scale specially using direct numerical simulation (DNS). As a result the effects of wettability alteration and/or Interfacial Tension (IFT) change on the distribution of the phases... 

Low salinity waterflooding (LSWF) is a process in which by lowering the ionic strength and/or manipulation of the composition of the injection water, the long term equilibrium in oil/brine/rock system is disturbed to reach a new state of equilibrium through which the oil production will be enhanced due to fluid/fluid and/or rock/fluid interactions. In spite of recent advances in the simulation of the LSWF at core scale and beyond, there are very few works that have modelled and simulated this process at the pore scale specially using direct numerical simulation (DNS). As a result the effects of wettability alteration and/or Interfacial Tension (IFT) change on the distribution of the phases... 

Low salinity waterflooding (LSWF) is a process in which by lowering the ionic strength and/or manipulation of the composition of the injection water, the long term equilibrium in oil/brine/rock system is disturbed to reach a new state of equilibrium through which the oil production will be enhanced due to fluid/fluid and/or rock/fluid interactions. In spite of recent advances in the simulation of the LSWF at core scale and beyond, there are very few works that have modelled and simulated this process at the pore scale specially using direct numerical simulation (DNS). As a result the effects of wettability alteration and/or Interfacial Tension (IFT) change on the distribution of the phases... 

Efficient mixing, typically characterised by chaotic advection, is hard to achieve in low Reynolds number conditions because of the linear nature of the Stokes equation that governs the motion. Here we show that low Reynolds number swimmers moving in quasi-periodic orbits can result in considerable stretching and folding of fluid elements. We accurately follow packets of tracers within the fluid domain and show that their trajectories become chaotic as the swimmer's trajectory densely fills its invariant torus. The mixing process is demonstrated in two dimensions using the Quadroar swimmer that autonomously propels and tumbles along quasi-periodic orbits with multi-loop turning trajectories....