Sharif Digital Repository

Increasing rate of demanding biodiesel as alternative energy resource, persuade researchers to investigate engine performance of biodiesel-fueled engines, which are highly influenced by ignition delay (ID) and combustion characteristics of such a fuel. This review article introduces a literature review on ignition delay (ID) and combustion characteristics of diesel engine fueled with biodiesel. Slightly difference between combustion characteristics of bio fueled engine and petroleum diesel one recognized as result of carried out investigations. Early start of combustion (SOC) and shorter ID of biodiesel comparing to diesel is reported by most of investigations. Lower compressibility, higher... 

This study seeks a method for formulating directional strategy of wind turbine industry in Iran. To this end, by initially evaluating various economic viewpoints concerning the development of industries, the necessity of government intervention is recognized. By defining the concepts of national industry policy, firm technology strategy, and national technology strategy, the role of directional industry strategy is then made clear. Furthermore, the six assumptions of emphasis on formulating strategy (rather than on formulating policy), emphasis on formulating directional strategy, model's prescriptivism, emphasis on formulating the strategy at the level of industry, Iran's being a developing... 

The aim of the present study is to provide an Atlas of IRAN Offshore Renewable Energy Resources (hereafter called 'the Atlas') to map out wave and tidal resources at a national scale, extending over the area of the Persian Gulf and Sea of Oman. Such an Atlas can provide necessary tools to identify the areas with greatest resource potential and within reach of present technology development. To estimate available tidal energy resources at the site, a two-dimensional tidally driven hydrodynamic numerical model of Persian Gulf was developed using the hydrodynamic model in the MIKE 21 Flow Model (MIKE 21HD), with validation using tidal elevation measurements and tidal stream diamonds from... 

In a glance, more than three billion people live in the rural areas of low and middle income countries. In most cases, rural households have many unmet energy needs including cooking, lighting, heating, transportation and telecommunication needs. The main goal of this study is Implementing Conceptual Model Using Renewable Energies in Rural Area of Iran. In this study, the Weibull and Angestrom distribution methods were used to assess the potential of wind and solar energy range in Chaharmahal va Bakhtiari province of Iran (The Case study). After determining the values calculated based on meteorological stations' data, the IDW interpolation method in GIS software was used for the entire... 

The techno-economic and environmental performance of hybrid solar hydrogen energy systems was investigated to provide combined cooling, heating and power (CCHP) demands of a standalone greenhouse in Iran to achieve sustainable agriculture based on an optimization procedure. From the environmental point of view, by deploying hybrid energy systems, 83%, to 100% of emissions can be avoided. Also a sensitivity analysis was performed on the hybrid energy systems in order to study the effect of major parameter variation on the systems justification. It was concluded that hybrid solar systems are economically competitive with conventional systems, for high solar intensity locations with high diesel... 

Sustainable economic growth and improvement of the social welfare depend upon the sufficient supply of energy resources, while the utilization of energy resources is one of the main factors of environmental degradation. This research is involved with development of a sustainable energy system model and a new method for sustainability assessment. This model represents the flow of energy from primary resources through processing, conversion, and end-use technologies in an optimization framework where the useful energy demand in various social and economic sectors is met. The impact of energy supply and consumption chain on the environment at each level of energy system is also embedded in the... 

Aquifers are underground porous formations containing water. Confined aquifers are surrounded by impermeable layers on top and bottom, called cap rocks and bed rocks. A confined aquifer with a very low groundwater flow velocity was considered to meet the annual cooling and heating energy requirements of a residential building complex in Tehran, Iran. Three different alternatives of Aquifer Thermal Energy Storage (ATES) were employed to meet the heating/cooling demands of the buildings. These alternatives were using ATES for: Cooling alone, heating alone by coupling with at-plate solar collectors, and cooling and heating by coupling with a heat pump. For the economic evaluation of the... 

This paper aims to analyze Iran's long-term power sector development from economic, environmental, social, and sustainable perspectives. For this purpose, a linear programming model is developed, which includes three objective functions: minimization of costs, minimization of CO2 emissions, and maximization of created jobs. To provide a sustainable plan, analytical hierarchy process is employed to allocate expert-based weights to the objective functions. Moreover, to support the decision-makers, Pareto-optimal alternatives are explored by varying the weights of objectives. The multi-objective model is solved by applying a weighted method based on fuzzy membership functions. The results show... 

The purpose of this study is to apply managerial economics and methods of decision analysis to study the optimal pattern of innovation activities for development of new energy technologies in developing countries. For this purpose, a model of energy research and development (R&D) planning is developed and it is then linked to a bottom-up energy-systems model. The set of interlinked models provide a comprehensive analytical tool for assessment of energy technologies and innovation planning taking into account the specific conditions of developing countries. An energy-system model is used as a tool for the assessment and prioritization of new energy technologies. Based on the results of the... 

Energy innovation is a key requirement to limit global warming and tackle climate change in the years to come. A better understanding of the public R&D mechanism is likely to improve allocation of resources for energy innovation. Thus, the present paper evaluates the impacts of public R&D and knowledge spillovers on the development of renewable energy sources. To achieve this goal, knowledge flow has been modeled as a function of public R&D expenditures, cumulative knowledge stocks and knowledge spillovers. To show the application of the model, the Nordic countries as one of the pioneers in renewable technologies have been chosen. Results show the cumulative knowledge stock will increase to... 

One of the primary factors affecting the amount of worldwide energy consumption and greenhouse gas emissions is cooking. Solar cooking is an appropriate solution because it is both inexpensive and expandable. To illustrate modern advancements and the current status of solar cooking technology, this paper presents a review of recent experimental and analytical socioeconomic studies on solar cookers. The experimental studies have been divided into three categories based on different solar cooker structures: (i) box types, (ii) concentrating types, and (iii) panel types. Next, different designs are investigated according to their direct or indirect heat transfer modes and optional equipment for... 

In recent years, increasing attention has been paid to the use of renewable energy sources in building sector. The ground source heat pumps are a promising alternative for heating and cooling applications. Despite the high coefficients of performance and significant environmental benefits, their performance may deteriorate over the long-term operation if the annual ground loads are not well balanced. An appropriate solution is the use of hybrid ground source heat pump system through which some portion of the thermal loads can be offset by supplemental components. The aim of this study is to assess the feasibility of a solar-assisted ground source heat pump system for heating a detached house... 

This paper addresses a low complexity and high efficient cooling system applicable on photovoltaic (PV) system leading to enhance electrical efficiency and provide preheated water. The developed system consists of a photovoltaic panel, a cooling water system establishing a uniform surface temperature, and a solar water heater. According to the proposed system characteristics, the setup is constructed based on a single mono-crystalline solar panel to absorb more solar radiation intensity and generate more electrical energy per area in compare to a poly-crystalline panel. The preheated water produced by absorbed heat from the photovoltaic is conducted to a solar water heater to satisfy... 

A comprehensive optimal bidding strategy model has been developed for renewable micro-grids to take part in day-ahead (energy and reserve) and real-time markets considering uncertainties. A two-stage stochastic programming method has been employed to integrate the uncertainties into the problem. Moreover, the Latin hypercube sampling method has been proposed to generate the wind speed, solar irradiance, and load realizations via Weibull, Beta, and normal probability density functions, respectively. In addition, a hybrid fast forward/backward scenario reduction technique has been applied to reduce the large number of scenarios. Furthermore, the risk of participation in the markets has been... 

In recent decades, many countries have shown a growing interest in the use of renewable energies for power generation. Geothermal energy is a clean and environmentally friendly source of renewable energy that can be used to produce electricity and heat for industrial and domestic applications. While Afghanistan has undeniably good geothermal potential that can be utilised to alleviate the country’s current energy limitations, so far this potential has remained completely untapped. In this study, the suitability of 21 provinces for geothermal project implementation in Afghanistan was evaluated using multiple multi-criteria decision-making (MCDM) methods. The stepwise weight assessment ratio... 

Feed-in tariff (FiT) is one of the most efficient ways that many governments throughout the world use to stimulate investment in renewable energies (REs) technology. For governments, financial management of the policy could be challenging as it needs a considerable amount of budget to support RE producers during the long remuneration period. In this paper, it has been illuminated that the early growth of REs capacity could be a temporary boost. And the socio-economic structure of the system will backlash the policy if some social mechanisms are not considered. Social tolerance for paying REs tax and potential investors’ trust emanated from budget-related mechanisms -which have rarely been... 

The objective of the present study is the development of an optimization model for identifying the best configuration of renewable-based integrated energy systems. The system includes a combination of renewable energy systems such as wind, solar, hydropower and hydrogen production, storage facilities and conventional fossil-fuel generators. The developed tool consists of various modules where water heating assumes the utilization of waste energy as an option. Furthermore, the application, which is demonstrated for a case study in Tehran, has been considered. The power exchange with the distribution network and injection of hydrogen produced from excess renewable sources into gas network are... 

A multi-objective energy management strategy for a plus-zero energy building during a year, incorporating renewable resources, air to water heat pump, micro-CHP, ventilation, energy storage systems and thermal-cooling-electrical loads have been proposed in this paper. In this strategy, a novel technology of wind turbine that has been known as INVELOX has been investigated and collaborated in ZEB planning to reach efficient plus-ZEB at lower cost and pollution. As well the building can sell and buy power to/from the upstream network. The total cost and pollution of the building have been considered as objective functions. Also, the effect of objective function priority on the planning of the... 

The global demand for renewable energy sources has arisen significant research interests in marine hydrokinetic energy harvesting from flow induced vibrations. The current study deals with the hydrokinetic energy harvesting potentials of diamond and square oscillators at various inline configurations. Both the sharp edge sections and the wake induced vibrations in tandem arrangement can lead to galloping type of instability with high energy efficiency ratios. The present in-water towing tank experiments comprise 1DoF vibrating systems at Re ranging from 2 × 103 to 4.8 × 104. The results show that the upstream wake generally enhances the system efficiency and the mechanical work done by the... 

Electric spring (ES) as a novel concept in power electronics has been developed for the purpose of dealing with demand-side management. In this paper, to conquer the challenges imposed by intermittent nature of renewable energy sources (RESs) and other uncertainties for constructing a secure modern microgrid (MG), the hybrid distributed operation of ESs and electric vehicles (EVs) parking lot is suggested. The proposed approach is implemented in the context of a hybrid stochastic/robust optimization (HSRO) problem, where the stochastic programming based on unscented transformation (UT) method models the uncertainties associated with load, energy price, RESs, and availability of MG equipment....