Sharif Digital Repository

The bond of fiber-reinforced polymer (FRP) reinforcement is expected to be more sensitive to the strength and geometry of the ribs than conventional steel reinforcement. In this study, the effect of carbon fiber mat anchorage on the pullout behavior of glass fiber-reinforced polymer (GFRP) bars embedded in normal concrete is studied. The studied parameters were the compressive strength of the concrete (16 MPa, 24 MPa, and 37 MPa), and, the length and diameter of the anchorage. In total, 15 variables were studied. Ribbed GFRP bars with 10 mm nominal diameter and 80 mm embedment length, ld, (which is 8 times the bar diameter) were considered. Based on the results for concretes with the... 

The application of ultra-high performance concrete (UHPC) as an alternative to conventional/normal concrete (NC) has grown rapidly in recent years. However, there is limited knowledge on its shear behavior, which is essential for developing design guidelines for structural applications. A detailed parametric study was conducted on 38 beam specimens, half of which were made of UHPC and the other half made of NC. To ensure applicability of findings, two types of UHPC mixes were used, a proprietary and a generic mix. Eighteen of the beams were prepared and tested in Tabriz, Iran, while the other 20 were made and tested in Miami, FL. Test parameters included type of concrete (UHPC and NC), shear... 

Thin porous membranes are important components in a microfluidic device, serving as separators, filters, and scaffolds for cell culture. However, the fabrication and the integration of these membranes possess many challenges, which restrict their widespread applications. This paper reports a facile technique to fabricate robust membrane-embedded microfluidic devices. We integrated an electrospun membrane into a polydimethylsiloxane (PDMS) device using the simple plasma-activated bonding technique. To increase the flexibility of the membrane and to address the leakage problem, the electrospun membrane was fabricated with the highest weight ratio of PDMS to polymethylmethacrylate (i.e., 6:1... 

Timber joints with glued-in rod connections provide an interesting technical solution for numerous structural applications, also under harsh environmental conditions; yet little research is available on this topic. This paper experimentally investigated the effect of exposure to seawater wetting/drying cycles and seawater wetting/drying plus UV radiation cycles on the pull-out performance of glued-in rod timber connections. Three rod diameters, three anchorage lengths, and four exposures were considered, leading to manufacturing and testing a total of 189 specimens. The quasi-static monotonic pull-out resistance of joints was a function of rod diameter and anchorage length as well as...