Sharif Digital Repository

An Atomic Force Microscope (AFM) is a capable tool to manipulate nanoparticles by exerting pushing force on the nanoparticles located on the substrate. In reality, the substrate cannot be considered as a smooth surface particularly at the nanoscale. Hence, the particle may encounter a step on the substrate during a manipulation. In this study, dynamics of the nanoparticle on a stepped substrate and critical pushing force in the manipulation are investigated. There are two possible dynamic modes that may happen in the manipulation on the stepped substrate. In one mode, the nanoparticle may slide on the step edge and then climb up to the step which is a desired mode. Another possible mode is... 

Heteropoly acid was found to be an effective and efficient catalyst for the ring opening reaction of epoxides with various aromatic amines to produce the corresponding β-amino alcohols in moderate to excellent yields in water. This method provides a new and efficient protocol in terms of mild reaction conditions, clean reaction profiles, small quantity of catalyst, and simple work-up procedure  

A simple, rapid, atom economy and highly efficient procedure has been developed for thiolysis of epoxides by aromatic and aliphatic thiols under solvent-free conditions. A high regioselectivity in favor of nucleophilic attack at the benzylic carbon atom of aromatic epoxides, such as styrene oxide, is observed. However, aliphatic unsymmetrical alkenyl oxides undergo selective nucleophilic attack at the sterically less hindered carbon atom. A variety of β-hydroxy sulfides were obtained in short reaction time and excellent yields with nearly complete regioselectivity  

The taping mode Atomic Force Microscopic (T-AFM) can be properly described by a sinusoidal excitation of its base and nonlinear potential interaction with sample. Thus the cantilever may cause chaotic behavior which decreases the performance of the sample topography. In this paper a nonlinear delayed feedback control.is proposed to control.chaos in a single mode approximation of a T-AFM system. Assuming model parameters uncertainties, the first order Unstable Periodic Orbits (UPOs) of the system is stabilized using the sliding nonlinear delayed feedback control. The effectiveness of the presented methods is numerically verified and the results show the high performance of the control.er  

Minimum entropy control technique, an approach for controlling chaos without using the dynamical model of the system, can be improved by being combined with a nature-based optimization technique. In this paper, an ACO-based optimization algorithm is employed to minimize the entropy function of the chaotic system. The feedback gain of a delayed feedback controller is adjusted in the ACO algorithm. The effectiveness of the idea is investigated on suppressing chaos in the tapping-mode atomic force microscope equations. Results show a good performance. The PSO-based version of the minimum entropy control technique is also used to control the chaotic behavior of the AFM, and corresponding results... 

In this work a new method for analyzing nanostructured materials has been proposed to accelerate the simulations for solid crystalline materials. The proposed Structural Approximation Method (SAM) is based on Molecular Dynamics (MD) and the accuracy of the results can also be improved in a systematic manner by sacrificing the simulation speed. In this method a virtual material is used instead of the real one, which has less number of atoms and therefore fewer degrees of freedom, compared to the real material. The number of differential equations that must be integrated in order to specify the state of the system will decrease significantly, and the simulation speed increases. To generalize... 

This research regards to a two-dimensional lateral pushing nanomanipulation using Atomic Force Microscope (AFM). Yet a reliable control of the AFM tip position during the AFM-based manipulation process is a chief issue since the tip can jump over the target nanoparticle and then the process can fail. However, a detailed Modeling and understanding of the interaction forces on the AFM tip is important for prosperous manipulation control and a nanometer resolution tip positioning. In the proposed model, Lund-Grenoble (LuGre) dynamic friction model is used as friction force on the contact surface between the nanoparticle and the substrate. This model leads to a stick-slip behavior of the... 

Co-deposition of RF-sputtering and RF-PECVD from acetylene gas and Au target were used to prepare sensor chip of gold nanoparticles (Au NPs). Deposition conditions were optimized to reach a Localized Surface Plasmon Resonance (LSPR) sensor chip of Au NPs with particle size less than 10 nm. The RF power was set at 180 W and the initial gas pressure was set at 0.035 mbar. Transmission Electron Microscopy (TEM) images and Atomic Force Microscopy (AFM) data were used to investigate particles size and surface morphology of LSPR sensor chip. The Au and C content of the LSPR sensor chip of Au NPs was obtained from X-ray photoelectron spectroscopy (XPS). The hydrogenated amorphous carbon (a-C:H)... 

Bioinspired materials can mimic the stem cell environment and modulate stem cell differentiation and proliferation. In this study, biomimetic micro/nanoenvironments were fabricated by cell-imprinted substrates based on mature human keratinocyte morphological templates. The data obtained from atomic force microscopy and field emission scanning electron microscopy revealed that the keratinocyte-cell-imprinted poly(dimethylsiloxane) casting procedure could imitate the surface morphology of the plasma membrane, ranging from the nanoscale to the macroscale, which may provide the required topographical cell fingerprints to induce differentiation. Gene expression levels of the genes analyzed... 

Nickel/silicon carbide composite electrodeposits were prepared on a rotating disk electrode (RDE), under pulse current condition. The effect of pulse parameters, current density, SiC content in the electrolyte on the codeposition of SiC were studied. Afterwards, the effect of codeposited SiC amount was investigated on electrochemical behavior and nanomechanical properties of coatings. The coatings were analyzed with Scanning Electron Microscopy (SEM), linear polarization, nanoindentation and Atomic Force Microscopy (AFM). The Ni-SiC electrocomposites, prepared at optimum conditions, exhibited improved nanomechanical properties in comparison to pure nickel electrodeposits. With increasing... 

In this study, drastic influence of the intramolecular cation-π interaction on the basicity of selected amines has been considered. The optimized minimum energy geometries of different studied amines and their protonated structures were determined by using DFT calculations at the B3LYP/6-311++G(d,p) level of theory. Geometry optimizations indicate that the most stable structures of protonated amines are stabilized by intramolecular cation-π interaction. The proton affinity (PA) of selected amines is controlled by the strength of intramolecular cation-π interaction of ammonium with aromatic ring. These cation-π interactions strongly influence the basicity of amines. Natural bond orbital (NBO)... 

Asphaltene deposition has hindered oil production from asphaltenic oil reservoirs through deposition in reservoir rock and surface facilities. This paper investigates the effect of resin on asphaltene deposition at different pressures. To investigate the asphaltene deposition in the presence of resins at reservoir temperature and different pressures, a pressure, volume, and temperature (PVT) visual cell was designed. A high-resolution microscope and image processing software were used to detect and determine the amount of deposited asphaltene as well as its size distribution at different conditions. Two types of Iranian crude oils with different potential of deposition (low and high) were... 

Bacteriorhodopsin is a heptahelical protein found in the purple membrane of Halobacterium salinarum. The performance of bacteriorhodopsin was evaluated as a sensitizer in dye-sensitized solar cells (DSSCs). Bacteriorhodopsin was efficiently immobilized on the titanium dioxide nanoparticles and then tested for its ability to convert solar radiation to electricity. The photovoltaic performance of DSSC based on the bacteriorhodopsin sensitizer has been examined. Under AM1.5 irradiation, a short-circuit current of 0.28 mA cm−2, open-circuit voltages of 0.51 V, fill factor of 0.62, and an overall energy conversion efficiency of 0.09 % are achieved employing platinum as a counter electrode. Carbon... 

A dictionary learning algorithm learns a set of atoms from some training signals in such a way that each signal can be approximated as a linear combination of only a few atoms. Most dictionary learning algorithms use a two-stage iterative procedure. The first stage is to sparsely approximate the training signals over the current dictionary. The second stage is the update of the dictionary. In this paper we develop some atom-by-atom dictionary learning algorithms, which update the atoms sequentially. Specifically, we propose an efficient alternative to the well-known K-SVD algorithm, and show by various experiments that the proposed algorithm is much faster than K-SVD while its results are... 

The misfit strain within the core of a two-phase free-standing core-shell nanowire resulting in the generation of an edge misfit dislocation or an edge misfit dislocation dipole at the core-shell interface is considered theoretically within both the classical and surface/interface elasticity approaches. The critical conditions for the misfit dislocation generation are studied and discussed in detail with special attention to the non-classical surface/interface effect. It is shown that this effect is significant for fine cores of radius smaller than roughly 20 interatomic distances. The positive and negative surface/interface Lamé constants mostly make the generation of the misfit dislocation... 

The synergistic effect of nano titanium dioxide (10 and 30 nm) and nano silver (10 nm) as antibacterial agents were investigated on UV curable clear coating. Antibacterial and physical-mechanical properties of coating were optimized using experimental design in response surface method. Twenty different samples of nano Ag and nano TiO2 were prepared in this method. Antibacterial properties on Gram-negative bacteria (Escherichia coli) were investigated. The results revealed that using equal amounts of two sizes of nano TiO2 promote the antibacterial activity of nano Ag. So, the coating shows strong activity against E. coli. Physical-mechanical properties such as surface hardness, abrasion... 

Pure titanium nanoparticles were synthesized by utilizing an Electromagnetic Levitation Melting Gas Condensation (ELM-GC) method. Pure bulk titanium samples were melted and evaporated by electromagnetic levitation technique in an inert gas atmosphere in a silica tube. Titanium nanoparticles were formed from ascending vapor by employing high purity argon and helium as carrier gases and cooling agents. Particle size and morphology of the produced nanoparticles were studied by Field-Emission Scanning Electron Microscopy (FE-SEM) and Dynamic Light Scattering (DLS) analysis. Results showed almost spherical nanoparticles with a narrow size distribution under both cooling atmospheres. The purity of... 

The effect of pulse reverse current (PRC) method on Ni-Mo coatings electroplated from chloride solution was investigated by various plating parameters such as plating duration, the anodic duty cycle, the anodic current density and the cathodic current density. By increasing the anodic duty cycle and anodic current density, the Mo content of coatings reached 68wt.% and 78wt.%, respectively at cathodic current densities of 500 and 300mAcm-2. The Mo content of coatings increases by the preferential dissolution of Ni on the anodic pulse and also by the replenishment of Mo complexes in the diffusion layer near the substrate surface during the anodic pulse. In comparison with the direct current... 

An electromagnetically induced phase grating (EIG) controlled by coherent population trapping (CPT) in a fourlevel Y-type atomic system is studied. The CPT condition promotes significantly the dispersion of light into the first-order diffraction in constructing a phase modulation grating by transferring energy from zero-order to firstorder diffraction. The diffraction efficiency of the phase grating is enhanced by up to 30% of the total probe intensity at the first-order diffraction. The present atomic scheme takes full advantage of the microwave-driven field for generating the EIG, which induces the quantum coherence and controls linear and nonlinear behaviors of the present system.... 

CdS/TiO2/graphene (CTG) nanocomposite thin films were synthesized by a facile production route. The TiO2/graphene (TG) nanocomposite was initially fabricated by sol-gel method in such a way that TiO2 nanoparticles loaded on graphene oxide (GO) sheet via photocatalytic process. Then, CdS nanoparticles were deposited on the TG thin film by successive ion layer adsorption and reaction process (SILAR) approach. Based on atomic force microscopy (AFM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses, the TG thin film possessed a larger surface area as compared with the pure TiO2 thin film due to presence of graphene sheet. UV/visible spectroscopy exhibited...