Sharif Digital Repository

We synthesized a titanium dioxide–polyaniline core–shell nanocomposite and implemented it as an efficient sorbent for the needle-trap extraction of some volatile organic compounds from urine samples. Polyaniline was synthesized, in the form of the emeraldine base, dissolved in dimethyl acetamide followed by diluting with water at pH 2.8, using the interfacial polymerization method. The TiO2 nanoparticles were encapsulated inside the conducting polymer shell, by adapting the in situ dispersing approach. The surface characteristics of the nanocomposite were investigated by Fourier transform infrared spectrometry, scanning electron microscopy, and transmission electron microscopy. After... 

In this study, firstly, a double-reservoir and switchable prototype of a micro-chip along with the respective holders were fabricated. A cyclic desorption process using microliter volume of organic solvent was adopted to prevent any outdoor contamination. As extractive phases, two identical sheets of electrospun polyamide/polypyrrole/titania nanofibers were synthesized using core–shell electro-spinning technique and utilized for determination of memantine in plasma samples. Field emission scanning electron microscopy images showed a high degree of porosity and homogeneity throughout the sheet structure. Also, energy dispersive X-ray analysis confirmed the presence of titania, while the... 

The authors have synthesized a superhydrophobic silica aerogel by using a sol-gel technique. The material is shown to be an efficient sorbent for needle trap microextraction of chlorobenzenes. Hydrophobicity affects the performance of the sorbent as shown by altering the ratio between tetraethylorthosilicate (TEOS) and methyltrimethoxysilane when synthesizing the sorbent. The observed contact angle (which is >150°) underpins the superhydrophobic properties of the aerogel. The microstructure of the sorbent was investigated by BET adsorption, revealing a surface area above 1000 m2 g−1. The sorbent was applied to needle trap extraction of chlorobenzenes from aqueous samples, and their... 

This work introduces a new gradient fiber coating for microextraction of chlorobenzenes. Nanoclusters of organoclay-Cu(II) on a copper wire were fabricated by wireless electrofunctionalization. The resultant gradient coatings are more robust, and thermally and mechanically stable. Wireless electrofunctionalization was carried out in a bipolar cell under a constant deposition potential and using an ethanolic electrolyte solution containing stearic acid and montmorillonite. Stearic acid acts as an inexpensive and green coating while montmorillonite acts as a modifier to impart thermal stability. The gradient morphology of the nanoclusters was investigated by scanning electron microscopy,... 

A turn-on fluorometric assay is described for determination of the activity of enzyme telomerase. For this purpose, graphene quantum dots (GQDs) were first modified with the telomeric sequence (5′-amino-AATCCGTCGAGCAGAGTT-3′) via a condensation reaction. Injection of graphene oxide causes instant quenching of the blue fluorescence of the GQDs. Addition of cell extract containing telomerase, triggers the extension of telomer via addition of specific sequence (TTAGGG)n to its 3′ end. Fluorescence, best measured at excitation/emission wavelengths of 390/446 nm, is subsequently restored due to folding of the extended telomeric sequence into G-quadruplex structure. The method was applied to the... 

Sol composition and ripening conditions are two important parameters in silica fiber production through the conventional sol-gel process. In the current study, silica nanofibers were successfully obtained via the electrospinning technique, and sol-gel formation occurred during this process. Based on previous reports, with the aim of increasing the selectivity, we used the molecular imprinted methodology to produce a selective medium via sol-gel electrospinning. In this process, sol-gel was formed during electrospinning and then, the backbone polymer was removed by heating. To obtain a thin layer of silica nanofibers, the influencing parameters such as backbone polymer types, imprinting time... 

Solid-phase microextraction probes based on poly(ethylene glycol)/C18-bonded silica were used for in vivo monitoring of drugs from circulating blood of beagles, over a period of 8 h. After sampling, the extracted drugs were subsequently quantified by liquid chromatography coupled with tandem mass spectrometry. External calibrations in whole blood and phosphate-buffered saline were used to correlate the amount of analytes extracted in regard to the total and free concentrations in blood respectively. The probe provided sufficient sensitivity for the drugs in the blood matrix, while the need for drawing blood was eliminated. The limit of detections of the method from whole blood were 1.7, 1.4... 

Ionic liquids are a significant type of organic salts with attractive and superior physicochemical features for employing in a number of chemical processes. Ionic liquids include one large and asymmetric cationic or anionic functional group. The properties of cationic functional group are almost similar and it is main motivation of this study. In the present investigation, we extended various semi-empirical correlations to predict some temperature-based properties of ionic liquids mixture (IL-mixture). These properties are density, viscosity, surface tension and bubble point pressure. In the case of IL-mixture density, modified Rackett equation and Taylor equation with three scenarios,... 

Task-based self-organizing algorithms have been proposed as a solution for the management of mobile ad-hoc networks (MANETs). Such algorithms assign tasks to nodes by sequentially selecting the best nodes as leaders. Since the correct functionality of such algorithms depends on the truthfulness of participant nodes, any misbehavior can disrupt the operation of the network due to absence of a centralized monitoring unit. In this paper, we consider the problem of malicious behavior in leader-based MANETs. Current solution analyzes the behavior of the leader by means of some checker nodes. This approach is vulnerable since a malicious checker can ruin the character of a normal behaving leader,... 

In this paper, we study the problem of leader selection in the presence of selfish nodes in mobile ad-hoc networks (MANETs). In order to encourage selfish nodes to assume the leadership role, some form of incentive mechanism is required. We present an incentive-based leader selection mechanism in which incentives are incorporated in the form of credit transfer to the leader, which motivates nodes to compete with each other for assuming the leadership role. The competition among nodes is modeled as a series of one-on-one incomplete information, alternating offers bargaining games. Furthermore, we propose an efficient algorithm in order to reduce the communication overhead imposed on the... 

Biomass, originates from plant- or animal-based materials with a huge potential to be reused. Here we report a simple, rapid and inexpensive method for preparation of modified biochars derived from the banana peel followed by their applications in pipette-tip micro solid-phase extraction (PT-µSPE). Due to the contribution of various effective parameters on modification of banana peel biochars (BPBs), Taguchi design was used to optimize activation temperature, activation repetition, treatment material and impregnation ratio. Efficiency of the prepared BPBs were studied by extraction of twelve various pesticides, as model analytes with an extended range of log P values (1.4–5.7), followed by... 

In this survey, firstly, a silicon wafer-based microchip, possessing a 50-cm microchannel with the dimensions of 120 and 60 μm, was manufactured by chemical etching technique. Subsequently, the inner surface of the microchannel was coated with a primary layer of gold nanoparticles synthesized by galvanic displacement. Then a self-assembled monolayer of 3-mercaptopropyltriethoxysilane was immobilized on the first layer. Eventually, a polydimethylsiloxane film with a thickness of 16 ± 1 μm was formed on the walls of the microchannel by means of sol-gel method. Field emission scanning electron microscopy and atomic force microscopy were extensively employed to investigate the status of both... 

A simple and rapid method for simultaneous separation and preconcentration of ultra-trace amounts of nitrate and nitrite using in-syringe liquid microextraction is developed. The extraction procedure is based on the selective ion-pairing complex formation of nitrate and nitrite with Cu(I)-neocuproine in 100 μL of 1-butyl-3-methylimidazolium hexafluorophosphate as an extracting phase within a syringe. The atomic-absorption signal of copper in the ionic liquid layer is proportional to the nitrate and nitrite concentrations. When barbituric acid is used, nitrite is converted into violuric acid and thus it is removed from the environment. In this case, the selectivity of the modified-ligand is... 

A superhydrophobic extractive phase was prepared and packed in a needle trap microextraction device for extraction of volatile organic compounds, followed by their determination by gas chromatography. The superhydrophobic phase was prepared by surface modification of melamine formaldehyde (MF) sponge embedded by reduced graphene oxide (rGO). The overall properties of the modified MF along with its high sorption capacity and low cost fabrication were indicative of its feasibility to be highly suitable for extraction of organic pollutants. The determined water contact angle (>150o) from the surface of melamine formaldehyde–reduced graphene oxide (MF–rGO) revealed its high affinity toward... 

A stable porous zinc-based metal organic framework (MOF) containing nitrogen-rich bis-tetrazolate ligand was synthesized to study the role of similar structures concerning both extractive phase and the desired solutes to achieve greater sorption efficiency. With implementing a dispersive micro-solid phase extraction (d-µ-SPE) methodology, the sorption capability and influencing structural parameters i.e., porosity, surface area and interactions types were investigated for the synthesized zinc-bis-tetrazolate (ZnBT) MOF and compared with some synthesized sorbents such as MIL-101, MIL-101-NH2, cadmium naphthalene dicarboxylic acid dimethyl formamide [Cd(NDC)(DMF)], polyaniline and LiChrolut®... 

In this research, an attempt was made toward synthesizing a sol–gel–based silica aerogel and its subsequent coating on a copper wire by phase separation of polystyrene. Adaption of this new approach enabled us to coat the metallic wire with powder materials. The use of this method for coating, led to the formation of a porous and thick structure of silica aerogel. The coated wire was placed in a needle and used as the sorbent for in–tube solid phase microextraction of chlorobenzenes (CBs). The superhydrophobicity of sorbent on extraction efficiency was investigated by using different ratios of tetraethylorthosilicate/methyltrimethoxysilane. The surface coated with the prepared silica aerogel... 

The aim of this study is to introduce an extractive phase based on gradient concept by continuous changing in chemical functional groups for non–targeted analysis. For this purpose, three different two–component coatings containing (3–aminopropyl)trimethoxysilane (APTES) as polar and either phenyltriethoxysilane (PTES), octyl–trimethoxysilane (OTMS) or methyltrimethoxysilane (MTMS) as nonpolar precursors were formed on the modified stainless steel wires using controlled rate infusion (CRI) method. The presence of polar and/or non–polar functional groups on the surface of substrate was evaluated by Fourier–transform infrared spectroscopy (FTIR) together with contact angles determined... 

In this study, cellulose acetate (CA) fibers were prepared using different solvent systems in electrospinning. The recorded scanning electron microscopy micrographs indicated that the morphology of the prepared fibers is closely associated with the type of electrospinning solvents. The prepared CA fibers were used as an extractive phase for on–line micro–solid phase extraction (μ-SPE) of nonsteroidal–inflammatory drugs (NSAIDs) in biological samples pursued by HPLC–UV determination. Work conducted on this research ascertained that the use of dichloromethane:acetone (3:1, v/v) solvent system in the CA dissolution for electrospinning, leads to the formation of porous ribbon–like fibers and... 

Polystyrene is one of the best candidates as the extracting medium due to its high stability in different media and acceptable extraction capability. However, the hydrophobic nature and low wettability of polystyrene limits its application to non–polar analytes. To resolve this limitation, in this project, amine groups were chemically attached to the surface of magnetic polystyrene. The resulting hydrophilic magnetic particles were expected to be capable of extracting both polar and non–polar analytes. Non–steroidal anti–inflammatory drugs (NSAIDs) were chosen for testing the applicability of modified magnetic polystyrene according to the importance of their analysis and also their wide... 

Sample preparation for non-target analysis is challenging due to the difficulty in the extraction of polar and non-polar analytes simultaneously. Most commercial solid sorbents lack the proper comprehensiveness for extraction of analytes with different physiochemical properties. A possible key is the combination of hydrophobic polymer and hydrophilic surface functional groups in solid based extraction methods in order to generate the susceptibility for retaining both polar and non-polar analytes. To pursue this goal, in this study, four polar groups including [sbnd]NH 2 , [sbnd]NO 2 , [sbnd]COOH, and [sbnd]COCH 3 were chemically bound to Amberlite XAD-4 substrate in order to prepare a...