Sharif Digital Repository

Timber is one of the materials widely used in construction and industry all over the world. In this paper, the behavior of strengthened timber beams made of beech wood (Fagus orientalis) were investigated experimentally. The composite timber beams were reinforced with flat, U-shaped, and L-shaped pultruded Glass Fiber Reinforced Polymer (GFRP) profiles. The GFRPs were attached to tensile or both tensile and compressive surfaces of beams. Altogether, 24 specimens, including 20 strengthened beams and 4 un-strengthened (control) beams, were tested under three-point bending test. Flexural behavior of specimens was evaluated through their load versus mid-span displacement curves, ultimate load... 

Multi-walled carbon nanotubes (MWCNTs) are one of the preferred candidates for reinforcing polymeric nanobiocomposites, such as acrylic bone type of cement. In this study, at first, bulk samples of the reinforced polymethylmethacrylate (PMMA) matrix were prepared with 0.1, 0.25, and 0.5 wt per wt% of MWCNTs by the casting method. Tensile and three-point bending tests were performed to determine the essential mechanical properties of bone cement, such as tensile and bending strengths. The tensile fracture surfaces were investigated by scanning electron microscopy (SEM). The commercial software (Abaqus) was used to conduct finite element analysis (FEA) by constructing a representative volume... 

Yttria-stabilized tetragonal zirconia polycrystals (Y-TZP) have been widely applied in fixed partial prostheses as well as dental uses i.e. a substructure for crowns. However, Y-TZP has limited applications, which is due to the presence of defects in its microstructure introduced during the manufacturing process. Accordingly, due to Y-TZP limitations, the novel (X)Y-TZP- 20Al2O3-(80-X) SiO2 (X = 65, 70 and 75) ceramic nanocomposites were successfully fabricated via the powder metallurgy method. X-ray diffraction (XRD) patterns of commercial powders showed the stabilization of monoclinic zirconia (ZM) by increasing the silica content. In order to determine the fracture load and micro-bending... 

Functionally graded aluminum matrix composites (FGAMC) are new advanced materials with promising applications due to their unique characteristics in which composite nature is combined with graded structure. Different architectures of Al6061/SiCp composite laminates were fabricated by successive hot roll-bonding. For FGAMCs, two composite layers as outer strips and a layer of Al1050 as interlayer were applied. To investigate laminate toughness, the quasi-static three-point bending test was conducted in the crack divider orientation. Genetic programming as a soft computing technique was implemented to find mathematical correlations between architectural parameters and experimentally obtained... 

In this article, a new method is proposed to identify the constants of the extended Drucker-Prager yield surface for polypropylene nanocomposites. The method is based on optimizing the difference between the numerical and the experimental results of a three-point bending test. The test specimens are made of polypropylene/nanoclay and polypropylene/nano-calcium carbonate nanocomposites with different nanoparticles content. Moreover, the effect of composite filler content on the extended Drucker-Prager constants of polypropylene, as the composite matrix, is investigated. Inasmuch as numerical simulation is usually very time-consuming and highly nonlinear, a surrogate-based model with radial... 

This paper presents the effect of volume of coarse aggregate on fracture characteristics of self- compacting concrete (SCC). Based on an experimental programme, a series of three point bending tests were carried out on 58 notched beams. SCC was prepared with coarse aggregate in varying percentages of 30%, 40%, 50% and 60% (as the percentage of the total aggregate volume). For all mixes, the fracture parameters were analyzed by the work-of- fracture method (WFM) and by the size effect method (SEM) to obtain a suitable correlation between these methods which is used to calibrate fracture numerical models. The results showed that with decrease of volume of coarse aggregate from 60% to 30% in... 

This study investigated the effect of gilsonite and Styrene-Butadiene-Styrene (SBS) as asphalt binder modifiers on the physical and rheological properties of asphalt binders. For this, binder tests such as penetration test, softening point, rotational viscosity (RV), Dynamic Shear Rheometer (DSR), and Bending Beam Rheometer (BBR) were conducted on the neat and modified binders. The effect of gilsonite and SBS on the binder temperature susceptibility was also investigated by measuring Penetration Index (PI), Activation Energy (AE) and Viscosity-Temperature Susceptibility (VTS) of all the study binders. Fourier-Transform Infrared Spectroscopy (FTIR) test was directed toward investigation of... 

A meshless method called reproducing kernel particle method (RKPM) is exploited to cope with elastic-plastic fracture mechanics (EPFM) problems. The idea of arithmetic progression is assumed to place particles within the refinement zone in the vicinity of the crack tip. A comparison between two conventional treatments, visibility and diffraction, to crack discontinuity is conducted. Also, a tracking to find the appropriate diffraction parameter is performed. To assess the suggestions made, two mode I numerical simulations, pure tension and pure bending tests, are executed. Results including J integral, crack mouth opening displacement (CMOD), and plastic zone size and shape are compared with... 

A new beam-to-column joint with high rotational as well as shear deformation capacity was devised. This high rotational 'capacity' is required to fulfill the great 'demand' for rotation arising during earthquakes, severe waves and current loads, etc. Due to its ability to contain damage during an overload, it leaves the connected elements intact. This, together with its replaceability can reduce the cost of post-event repair substantially. Its bending as well as shear performance under "monotonie" loading had already been assessed experimentally (OMAE'02-28864, OMAE'03-37292, OMAE'04-51494 & OMAE'05-6736l) and proved well superior to that of conventional joints. In order to study its... 

This paper deals with investigation of fracture behavior of steel fiber reinforced high strength concrete (SFRHSC) and compare it to plain high strength concrete (HSC). Based on an experimental program, a series of three point bending tests were carried out on 54 notched beams, as recommended by RILEM. The fracture parameters were measured by two methods: work of fracture method (WFM) and size effect method (SEM). Then the fracture parameters obtained from these two methods were compared. The results showed that with increase of steel fibers, fracture energy of GF in WFM and Gf in SEM increase but this increase in work of fracture method is more significant. The effective size of the process... 

In this work, the effect of zircon content on the mechanical and chemical behaviors of injection molded silica-based ceramic cores has been investigated. In order to simulate a casting process condition, the sintered samples at 1220 C were consequently heated up to 1430 C. Three point bending tests were carried out on all the prepared samples. The chemical resistance of the prepared cores was evaluated by leaching of samples in 43% KOH solution at its boiling point. Phase evolution and microstructure were investigated by XRD and SEM, respectively. Results showed that increasing zircon content led to an increase in MOR and decrease in leachability owing to the decrease in content of fused... 

This study investigates the effect of Thermal cycles on the mechanical properties of GFRP pultruded profiles with different geometries. Bending specimens consisted of I-shaped and U-channel profiles that were tested in three-point bending along their both principal weak and strong axes, whereas box profiles and laminates were used in compression and tension tests, respectively. Each specimen was exposed to a range of thermal cycles, between −20 °C and 20 °C. The failure modes of the profiles were closely investigated at both major and minor scales. Results were analyzed using ANOVA to determine the influence of each factor and a model was developed to predict the strength retention of... 

The environmental impact of asbestos fibers on human health and their consequent safety-related problems indicate that there is a significant need to replace this material in all asbestos-containing products. Many different types of fibers have been introduced to replace asbestos fibers. In this study, the performance of silica nano-particles combined with waste paper pulp fibers (sulfite fibers) has been investigated. Different mechanical (compressive and flexural strengths and bending performance), durability (water absorption), physical (bulk density and flowability), and microstructural (scanning electron microscopy) tests were conducted to examine the properties of manufactured green... 

Lamination has been shown to enhance damage tolerance of discontinuously reinforced aluminum (DRA) composites. Doing this technique, DRA layers could be laminated with ductile interlayers. In this research, two types of laminates consisting similar DRA layers and a ductile AA1050 interlayer were fabricated by means of hot roll-bonding. AA6061-5. vol% SiCp and AA6061-15. vol% SiCp composites were considered as exterior layers. Different rolling strains, was applied to control the interfacial strength which was examined by shear test. Toughness behavior of laminates was evaluated by three-point bending test in crack-divider orientation. Based on obtained results, the plastic deformation of...