Sharif Digital Repository

Due to the complexity of the human spinal motion segments, the intervertebral joints are often simulated in the musculoskeletal trunk models as pivots thus allowing no translational degrees of freedom (DOFs). This work aims to investigate, for the first time, the effect of such widely used assumption on trunk muscle forces, spinal loads, kinematics, and stability during a number of static activities. To address this, the shear deformable beam elements used in our nonlinear finite element (OFE) musculoskeletal model of the trunk were either substantially stiffened in translational directions (SFE model) or replaced by hinge joints interconnected through rotational springs (HFE model). Results... 

Background: Many studies have been conducted on the changes in the balance capabilities of stroke patients. However, results regarding the effects of dual-task activities on postural control in these patients have been variable. Objective: To evaluate the effects of a short-term memory task on the sway characteristics of stroke patients. Method: Center of pressure (COP) fluctuations were measured in three levels of postural difficulty (rigid surface with closed and open eyes and foamsurface with closed eyes), aswell as two levels of cognitive difficulty (easy and difficult). COP parameters included mean velocity, standard deviation of velocity in both medial-lateral (M.L) and... 

Background: Foot orthoses are used to optimize lower extremity function and can improve postural stability by enhancing the afferent somatosensory feedback available to the central nervous system. Objective: The aim of this review was to evaluate the effect of foot orthoses on balance control in older subjects. Study design: Systematic review. Methods: The search strategy was based on the Population Intervention Comparison Outcome method. A search was performed in PubMed, Science Direct, Google Scholar, and ISI Web of Knowledge databases by using selected keywords. A total of 22 articles were selected for final evaluation. Results: The results demonstrated that older people should be advised... 

Epidemiological studies are divided over the causative role of body weight (BW) in low back pain. Biomechanical modeling is a valuable approach to examine the effect of changes in BW on spinal loads and risk of back pain. Changes in BW have not been properly simulated by previous models as associated alterations in model inputs on the musculature and moment arm of gravity loads have been neglected. A detailed, multi-joint, scalable model of the thoracolumbar spine is used to study the effect of BW (varying at five levels, i.e., 51, 68, 85, 102, and 119kg) on the L5-S1 spinal loads during various static symmetric activities while scaling moment arms and physiological cross-sectional areas of... 

Various hybrid EMG-assisted optimization (EMGAO) approaches are commonly used to estimate muscle forces and joint loads of human musculoskeletal systems. Use of EMG data and optimization enables the EMGAO models to account for inter- and intra-individual variations in muscle recruitments while satisfying equilibrium requirements. Due to implications in ergonomics/prevention and rehabilitation/treatment managements of low-back disorders, there is a need to evaluate existing approaches. The present study aimed to compare predictions of three different EMGAO and one stability-based optimization (OPT) approaches for trunk muscle forces, spinal loads, and stability. Identical measured... 

Different lifting analysis tools are commonly used to assess spinal loads and risk of injury. Distinct musculoskeletal models with various degrees of accuracy are employed in these tools affecting thus their relative accuracy in practical applications. The present study aims to compare predictions of six tools (HCBCF, LSBM, 3DSSPP, AnyBody, simple polynomial, and regression models) for the L4-L5 and L5-S1 compression and shear loads in twenty-six static activities with and without hand load. Significantly different spinal loads but relatively similar patterns for the compression (R2>0.87) were computed. Regression models and AnyBody predicted intradiscal pressures in closer agreement with... 

Body posture measurement approaches, required in biomechanical models to assess risk of musculoskeletal injuries, are usually costly and/or impractical for use in real workplaces. Therefore, we recently developed three artificial neural networks (ANNs), based on measured posture data on several individuals, to predict whole body 3D posture (coordinates of 15 markers located on body's main joints), segmental orientations (Euler angles of 14 body segments), and lumbosacral (L5-S1) moments during static manual material handling (MMH) activities (ANNPosture, ANNAngle, and ANNMoment, respectively). These ANNs require worker's body height, body weight (only for ANNMoment), hand-load 3D position,... 

The 1991 NIOSH Lifting Equation (NLE) is widely used to assess the risk of injury to spine by providing estimates of the recommended weight limit (RWL) in hands. The present study uses the predictive equations developed based on a detailed trunk musculoskeletal biomechanical model to verify whether the RWL generates L5-S1 loads within the limits (e.g., 3400N for compression recommended by NIOSH and 1000N for shear recommended in some studies). Fifty lifting activities are simulated here to evaluate the RWL by the NLE and the L5-S1 loads by the predictive equations. In lifting activities involving moderate to large forward trunk flexion, the estimated RWL generates L5-S1 spine loads exceeding... 

BACKGROUND AND OBJECTIVES: It is suggested that activation of the transverse abdominis muscle has a stabilizing effect on the lumbar spine by raising intra-abdominal pressure without added disc compression. However, its feedforward activity has remained a controversial issue. In addition, research regarding bilateral activation of trunk muscles during a unilateral arm movement is limited. The aim of this study was to evaluate bilateral anticipatory activity of trunk muscles during unilateral arm flexion.MATERIALS AND METHODS: Eighteen healthy subjects (aged 25 ± 3.96 years) participated in this study and performed 10 trials of rapid arm flexion in response to a visual stimulus. The... 

An anatomically detailed eighteen-rotational-degrees-of-freedom model of the human spine using optimization constrained to equilibrium and stability requirements is developed and used to simulate several symmetric tasks in upright and flexed standing postures. Predictions of this stability and kinematics-driven (S. +. KD) model for trunk muscle forces and spine compressive/shear loads are compared to those of our existing kinematics-driven (KD) model where both translational and rotational degrees-of-freedom are included but redundancy is resolved using equilibrium conditions alone. Unlike the KD model, the S. +. KD model predicted abdominal co-contractions that, in agreement with... 

A new wearable assistive device (WAD) was developed to decrease required force on the lumbar spine in static holding tasks. In order to obtain moments on lumbar spine in two conditions, with and without WAD, a biomechanical static model was used for estimation of external moments on lumbar spine. The results of biomechanical models indicated that there was a reduction in the lumbar moment ranging from 20% to 43% using WAD depending on the load and flexion angle. A total of 15 male healthy subjects were tested to experimentally verify the predicted reduction of external moments on the spine by wearing WAD. Normalized electromyography (EMG) of the right and left lumbar and thoracic erector... 

Background: Most dentists complain of musculoskeletal disorders which can be caused by prolonged static posture lack of suitable rest and other physical and psychological problems. Objective: We evaluated a chair with a new ergonomic design which incorporated forward leaning chest and arm supports. Methods: The chair was evaluated in the laboratory during task simulation and EMG analysis on 12 students and subjectively assessed by 30 professional dentists using an 18-item questionnaire. EMG activity of right and left trapezius muscles for 12 male students with no musculoskeletal disorders was measured while simulating common tasks like working on the teeth of the lower jaw. Results:... 

Muscle force partitioning methods and musculoskeletal system simplifications are key modeling issues that can alter outcomes, and thus change conclusions and recommendations addressed to health and safety professionals. A critical modeling concern is the use of single-joint equilibrium to estimate muscle forces and joint loads in a multi-joint system, an unjustified simplification made by most lumbar spine biomechanical models. In the context of common occupational tasks, an EMG-assisted optimization method (EMGAO) is modified in this study to simultaneously account for the equilibrium at all lumbar joints (M-EMGAO). The results of this improved approach were compared to those of its... 

Response surface methodology is used to establish robust and user-friendly predictive equations that relate responses of a complex detailed trunk finite element biomechanical model to its input variables during sagittal symmetric static lifting activities. Four input variables (thorax flexion angle, lumbar/pelvis ratio, load magnitude, and load position) and four model responses (L4-L5 and L5-S1 disc compression and anterior-posterior shear forces) are considered. Full factorial design of experiments accounting for all combinations of input levels is employed. Quadratic predictive equations for the spinal loads at the L4-S1 disc mid-heights are obtained by regression analysis with adequate... 

As balance is the foundation for all voluntary motor skills, considerable research has been conducted to evaluate postural control in patients with low back pain (LBP). Although reliability is a population-specific property, to the authors' knowledge, there has been no study to determine the test-retest reliability of the center of pressure (COP) measures in the general population of LBP patients. As many as 11 patients with a history of nonspecific LBP randomly completed postural measurements with three levels of difficulty (rigid surface-eyes open, rigid surface-eyes closed, and foam surface-eyes closed) in two sessions. The COP data were used to calculate standard deviation of amplitude,... 

The human motor system is organized for execution of various motor tasks in a different and flexible manner. The kinetic redundancy in the human musculoskeletal system is a significant property by which the central nervous system achieves many complementary goals. An equilibrium-based biomechanical model of isometric three-dimensional exertions of trunk muscles has been developed. Following the definition and role of the uncontrolled manifold, the kinetic redundancy concept is explored in mathematical terms. The null space of the kinetically redundant system when a certain joint moment and/or stiffness are needed is derived and discussed. The aforementioned concepts have been illustrated,... 

Recurrence quantification analysis (RQA), a nonlinear method of postural analysis, was used to explore the effects of dual-tasking on postural performance in people with nonspecific low back pain (LBP) compared with healthy participants. Postural performance was quantified by RQA % recurrence, % determinism, entropy and trend. People with nonspecific LBP (n = 22) and unimpaired individuals (n = 22) randomly performed quiet standing tasks with three levels of difficulty (rigid-surface eyes open, rigid-surface eyes closed and foam-surface eyes closed). These tasks were performed in isolation or concurrently with an easy or difficult cognitive task. Increasing postural difficulty was associated... 

STUDY DESIGN.: To quantify trunk muscle capability and controllability in different angles and levels of isometric exertion using a torque tracking system. OBJECTIVE.: To investigate the effect of biaxial isometric exertions on the maximum capability of trunk and to examine the effect of angle and level of isometric exertion on trunk controllability during the tracking task in upright posture. SUMMARY OF BACKGROUND DATA.: Combined motions of trunk at varying exertion levels occur in most daily and occupational activities and are important risk factors of low back pain. Few studies have investigated trunk capability and controllability during multidirectional activities with different... 

STUDY DESIGN. Three factors mixed-design with 1 between-subject and 2 within-subject factors. OBJECTIVE. To compare the main effects and interactions of postural and cognitive difficulty on quiet stance between subjects with and without nonspecific low back pain (LBP). SUMMARY OF BACKGROUND DATA. The interference between postural control and cognitive tasks depends on factors such as sensorimotor/cognitive integrity. Changes in peripheral sensory and muscular systems as well as cognitive processes have been observed in LBP patients. It was hypothesized that the effect of cognitive task on postural performance might be different in subjects with nonspecific LBP as compared with healthy... 

This work aimed to evaluate trunk muscle forces, internal loads and stability margin under some simulated standing postures, with and without external loads, using a nonlinear finite element model of the T1-S1 spine with realistic nonlinear load-displacement properties. A novel kinematics-based algorithm was applied that exploited a set of spinal sagittal rotations, initially calculated to minimize balancing moments, to solve the redundant active-passive system. The loads consisted of upper body gravity distributed along the spine with or without 200 N held in the hands, either in the front of the body or on the sides. Nonlinear and linear stability/perturbation analyses at deformed,...