Sharif Digital Repository

In today’s world, the use of lateral load-bearing systems, such as bracings, has become a pretty common practice. Often showing axial deformation behavior, these members exhibit proper performance under tensile loads but tend to become unstable under compressive loads. In contrast to common bracing systems, the buckling-restrained bracing (BRB) systems perform well under not only tensile loads but also compressive loads. Recent studies have paid greater deals of attention to the application of short-core BRB systems in different structures. The bracing core has been shortened to increase the core deformation and hence the energy dissipation capacity of the bracing system. In this condition,... 

This thesis investigates the performance of concentrically braced frames through numerical simulation approaches. During a moderate to severe earthquake, the bracing members and their connections are expected to undergo significant inelastic deformations into the post-buckling range. Recently, provisions for special concentrically braced frames (SCBFs) were developed to exhibit stable and ductile behavior in the event of a major earthquake. Special Concentrically Braced Frames (SCBFs) are distinguished from Ordinary Braced Frames in that they possess improved post-buckling capacity. Performance based evaluation of SCBF system as well as ordinary concentrically braced frame (OCBF) system... 

In this Thesis Project the Behavior of Multi-story Steel Frames Equipped with Yielding elements has been investigated and analyzed. These elements act against severe earthquakes like fuse and cause dissipation in main part of input energy of structure. The position of these elements are at the cross point of braces. The most advantages of yielding elements in steel frames are ease to use and ability to replace after earthquake The main idea in this research is the effect of number of stories in buildings which are equipped with yielding elements.3,7 and 10-story steel frames with 3 bays and 15,20 and 25-story steel frames with 5 bays are the models for this investigation. At the first part... 

Although the moment frame can show deformable behavior against seismic loads, but its flexibility and low stiffness, especially in tall structures, cause the governance criterion to be designed. The use of eccentrically braced frames was able to solve the displacement problem to some extent, because it has the characteristics of both flexural frame systems and conccentric bracing. Different methods have been proposed to eliminate residual displacements in this type of system, one of which is the use of post tensioned cables. The aim of this study was to investigate the seismic behavior of a steel structure with a eccentrically braced frame system with post tension cable.The cables are anchor... 

In this research, seismic loss of eccentrically braced frame buildings is assessed by using reliability methods. For this end, first, Bayesian linear regression is utilized to characterize the epistemic uncertainty of the problem in the form of damage models. The input of these models are mechanical and physical properties of the components, and the outputs are damage ratios. In the second step, by using the developed models and the comprehensive library of probabilistic models of Rt, reliability analysis is conducted on 4, 8, and 16 stories building located in San Jose. The limit state function is seismic loss, including repair loss, collapse loss, and demolition loss, and analysis method... 

All buildings should be designed to bear both gravity loads and lateral loads such as earthquake. Resisting system for earthquake can be moment resisting frame, shear wall, brace or combination of them. Normally for strengthening of reinforce concrete buildings, shear wall should be added, but in some cases after constructing RC buildings, engineers find out that building does not have enough strength against seismic loads. In this case, adding shear wall is difficult because of architectural restrictions and assembling braces on the original frame is easier.
Structural engineers always looking to find a structural element to absorb earthquake energy to prevent potential damages of other... 

This paper aims at producing surrogate models which can predict building structural response under ground motion loads. Rapid response prediction has a great influence on post-event decision-making. The current study follows mentioned purpose in two main sections. The first section proposed deep models, able at estimating displacement time-series response by using only ground motion and roof acceleration. By this point, different preprocessing methods and their effects are studied. Also, a novel loss function is introduced and a hybrid model consists of different deep layers utilized to gain accurate models. These models train and evaluate on two case-study buildings; a special moment frame... 

In this study, HSS and double angle braces subjected to cyclic loading in order to study the buckling and post buckling behavior have been investigated by Finite Element method. The results of FE analysis are fairly in good agreement with experiments. Analysis demonstrate that when local buckling occurs in middle span, subsequently, strain rises severely. Accordingly, this strain jumping causes early fracture in braces. Therefore, local buckling can be one of the primary reasons of fracture in braces. As a result, local buckling must be considered one of the primary limit state of Performance-Based design of steel braces. In addition, finding a way to predict local buckling can help us to... 

In this work the response modification factor (RMF), behaviour factor, of two-dimensional regular and split-level steel braced frames was worked out and presented. A total number of 840 frames with various number of stories, spans, braced spans and span lengths were studied. Frames were loaded based on ASCE 7-10 and designed in accordance with AISC 360-10. Static nonlinear analysis and Uang method were used for obtaining the RMFs of the studied frames. The effect of split-level irregularity and parameters such as number of stories on the RMF were worked out and are presented in this thesis. Linear regression was used to develop formulae for RMFs of regular and split-level braced frames.... 

This study investigates the seismic behavior of eccentrically braced frames (EBFs) taking into account the influence of masonry infill walls. The primary objectives of the study are to predict the seismic global response and develop associated fragility curves using a nonmodel scenario-based machine learning framework. To model the infill walls, equivalent diagonal struts are employed, and a nonlinear pushover analysis is conducted to assess the overall impact of infills on 4- and 8-story EBF structures. An extensive database of 4 bare and 48 infilled EBFs with various infill properties is assembled to predict story-based engineering demand parameters (EDPs) containing peak and residual... 

In this research, a structural lateral bracing system called ‘Chevron Knee Bracing’ (CKB) on reinforced frames is investigated. This new form of framing system is constructed through the knee and the diagonal brace elements. The diagonal brace component provides the required level of lateral stiffness and stays in the elastic range without buckling at any time. However, the knee part is a fuse-like component that dissipates energy by the formation of plastic flexural and/or shear hinges at its ends and mid-span, when the building is subjected to severe lateral loads. For this purpose, first, by elastic studying of the system, three new and practical parameters are established. Then, the best... 

Nowadays because of imbalance in supply and demand in the house industry, industrialization of building construction is one of the best ways to solve this problem. Currently, there is a strong tendency to develop guidelines for the design of Cold-Formed Steel (CFS) with different sheathing boards as seismic resistant shear walls. Also, the behavior of this systems is not very well known yet and more research is needed. In this work three K-braced frames with and without sheathing boards under lateral cyclic loading investigated experimentally. The first specimen as a control specimen is without sheathing board, second specimen was sheathed with Fibre-Cement board in one side and gypsum board... 

Offshore platforms are one of the most important structures in oil-rich countries, so that their economic benefit makes it very expensive to stop their usage. Therefore, it is essential that their performance is not disrupted by earthquake or the tidal waves made by severe storms. In the conventional bracing systems, it is assumed that the braces buckle under compressive forces; but Buckling Restrained Brace (BRB) does not buckle under pressure. In this study performance of BRB in jacket platform, with a case study of Resalat platform, has been investigated under earthquake load and powerful wave. The modeling of jacket equipped with this brace has been done in Abaqus software, and results... 

By constraining the steel members against lateral buckling, buckling-restrained braces (BRB’s) show similar load-deformation behaviors and energy absorption capacities in both tension and compression. As a result, BRB’s demonstrate significant energy dissipation capacity compared to ordinary braces. On the other hand, the relatively small post-yield stiffness of BRB’s usually leads to significant residual drifts, which may render the structure unusable. In recent decades, significant research has been put into improving the performance of structures equipped with BRB’s. In this project, the current methods to enhance the performance of the BRB’s are explored, and novel approaches are... 

In the present study it was intended to evaluate the seismic performance of multi-story EBF structures for designing. When adopting this method, parametric studies are carried out based on the nonlinear performance of such systems whiting the framework of nonlinear static and dynamic analyses. In lines with seismic strengthening of such structures, this study tries to reassess the performance of these systems through increasing ductility and replacing bracing frames with energy damper and special seismic systems. As a result, a fuse type performance is created to protect the other elements of the structure. This study describes the seismic strengthening of this type of dampers using simple... 

In this thesis, the nonlinear seismic behavior of typical Iranian building is evaluated. The evaluation results indicated that these building, which were designed, based on first edition of 2800 standard and before, due to ductility and stiffness deficiency, don’t satisfy the 3th edition of 2800 standard and FEMA356 requirements, then retrofit of the most old structures is recommended. Selected samples include ordinary moment resistant concrete frames. The effectiveness of three retrofit schemes, concentric steel bracing (CBF), Eccentric steel bracing (EBF) and buckling restrained bracing, are studied and compared. The results of investigation indicated that although CBF retrofit scheme is... 

A new eccentrically braced system is discussed. In this system which Named “eccentrically braced frame with vertical link”, the braces is connected to vertical link, instead of floor beam. The vertical link acts as a ductile energy-dissipating element, allowing the rest of the construction such as floor beams, braces and columns remain in the elastic range. In this paper, a parametric study is performed on sample frames with push-over analysis. In these analysis, the efficacy of the variation of link length, link area and the position of the link beam, is studied. The results showed that, the most important effective parameters in improvement of inelastic behavior of frame is decreasing of... 

One of the most efficient methods in stiffening tall buildings to withstand lateral loads such as wind loading is to link the shear resisting core to the exterior columns using outrigger trusses. Many tall buildings such as Taipei 101 have benefited from outriggers. In this system, the outriggers force the perimeter frame to take part in resisting the bending moment of the lateral load acting on the structure by developing axial restraining forces in the windward and the leeward columns of the perimeter frame and forming a resisting moment.Most of the present analytical methods have studied the performance of outrigger braced structures neglecting shear deformation of the shear wall core and... 

Nowadays, Braced Frames systems are prevalent as a structural resisting lateral loads. One of the most crucial prominent of them is Disposable Knee Bracing (DKB). In such a system, braces provide stiffness, while the link elements play an important role as an energy-absorbing fuse to dissipate energy by plastic deformation. In this research, bracing frames consist of shear and/or flexural link elements. The experimental results reveal that hysteresis behavior of link elements remains constant till specific rotation. After that, sharply decrease due to crack failure of these elements occurs. This specific rotation has been reported between 0.06 to 0.08 Rad. Seismic performance factors such as... 

With increasing population and lack of habitable spaces, the building heights increased in cities around the world. Placing components of a structure in tandem may cause a permanent failure of the members due to strength reduction. During recent years, this kind of failure occurred in different places of the world, and is called progressive collapse. There are some various samples of the progressive collapse which all are good samples of failures such as building failure in Ronan Point in the UK, Twin Towers or the world trade center in NY, and Pentagon building. According to these issues, different institutions codified guidelines and codes in this field such as Department of Defense as DoD...