Sharif Digital Repository

This review paper is devoted to the intensification of processes for nitrate removal. First, the developments of microfluidic sensors for nitrate detection and analysis have addressed. Second, the process variables of photocatalytic nitrate removal have been categorized according to their relationship with activity, selectivity and stability of the catalyst. The objective of this classification is to generate guidelines toward the photocatalytic process optimization. Third, because of the fact that a single method for nitrate removal faces some challenges, hybrid methods have been presented, and the best choice for nitrate removal can be referred to as photocatalytic – reverse osmosis... 

In this manuscript, synthesis of cobalt/poly vinyl alcohol (PVA)/gamma alumina nanocomposite via a simple room temperature, as well as its catalyst performance were explored. Brunauer–Emmett–Teller analysis, X-ray diffraction, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy were conducted. The surface area of the polymeric composite was obtained to be 280 m2/g. The cobalt loading on the nanocomposite was measured using inductivity couple plasma. Transmission electron microscopy analysis showed that the size of cobalt crystalline encapsulate inside the polymer was confined to 5 nm. Magnetic property analysis, using vibrating sample magnetometer, confirmed... 

Aqueous-phase reforming (APR) of oxygenated hydrocarbons for hydrogen production presents several advantages as feed molecules might be easily found in a wide range of biomass; there is no need for its vaporization and the process allows thorough exploitation of the environmental benefits of using hydrogen as an energy carrier. In this contribution, catalysts with active phase Ni supported on Al2O3-MgO were synthesized at different loadings (1, 3, 5, 7, and 10 wt%) through the co-precipitation technique and tested for the Glycerol APR reaction. Effects of the Ni loading on physicochemical characteristics of Ni/Al2O3-MgO catalysts were examined. Moreover, catalytic performance was... 

Abstract: Polyoxometalate-functionalized magnetic nanoparticles (Fe3O4@SiO2–MnPOW) were successfully synthesized via covalent anchoring of Mn(II)-substituted phosphotungstate on ammonium-modified Fe3O4@SiO2 nanoparticles. The complete characterization of nanoparticles has been carried out by scanning electron microscope, energy-dispersive X-ray, X-ray diffraction, Fourier transform infrared and elemental analysis. The resulting nanocomposites were efficient catalysts for the selective oxidation of sulfides with different green oxidants in good to excellent yields and also high selectivity. Leaching and recycling tests showed that the nanocatalyst can be reused several times without... 

Abstract: A metal-free method for activation of hydrogen peroxide (H2O2) is introduced using piperidinium trifluoroacetate (PPHTFA) ionic liquid as catalyst. The catalyst has been used for selective oxidation of thioanisole to its corresponding sulfoxide at room temperature. It was found that the selectivities were reduced by increasing the reaction temperature. In this work, no organic solvents or metallic salts were used for activation of H2O2. Mechanistic studies suggested that the reaction proceeds via in situ formation of trifluoro hydroperoxy species as an active catalytic intermediate. Formation of the catalytic intermediate was screened by NMR, IR and Mass Spectroscopy analysis.... 

The reaction of Fe(acac)3 and 2-(2′-hydroxyphenyl)oxazoline (Hphox) as a bidentate O,N donor ligand afforded a six-coordinated iron(III) complex [Fe(phox)2(acac)] with distorted octahedral configuration. The complex was isolated as an air-stable crystalline solid and characterized by elemental analysis, FTIR, solution electrical conductivity, and by single-crystal X-ray structure analysis. The structure, electronic properties, and vibrational normal modes of the complex were investigated by DFT. The use of this complex as a catalyst for the oxidation of sulfides to their corresponding sulfoxides using urea hydrogen peroxide as the primary oxidant was investigated. The catalyst shows very... 

A molybdenum complex, [MoO2Cl2(DMSO)2], was immobilized on amino propyl and Schiff base modified magnetic Fe3O4@SiO2 nanoparticles by covalent linkage. The resulting nanoparticles were used as efficient and recyclable catalysts for the selective oxidation of sulfides to sulfoxides using urea hydrogen peroxide as the oxidant. The complete characterization of catalysts was carried out by means of thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), X-ray photoelectron spectroscopy (XPS), elemental analysis, FT-IR and Raman microprobe... 

Palladium catalysts supported on functionalized multi-wall carbon nanotubes were synthesized for hydro-purification of crude terephthalic acid containing 2100ppm 4-carboxybenzaldehyde (4-CBA) as impurity. PdCl2 and Pd(OAc)2 were used as precursors. Palladium loadings were 0.05 to 0.6wt.% with catalysts reduced at 200 to 400°C. Catalysts prepared from both precursors with least 0.3wt.% palladium resulted in 99%+ removal of 4-CBA. The most desired selectivity was obtained for the catalyst with PdCl2 as precursor, reduction temperature of 300°C, and palladium loading of 0.3wt.%. This catalyst had slightly better performance than the commercial catalyst (0.5wt.%... 

Hybrid composites of MIL-101(Cr) and Nanoporous Graphene with ratios in the range of 10–50% were prepared via hydrothermal synthesis method. This study deals with an experimental investigation on selective oxidation of H2S into elemental sulfur in the range of 200–270 °C, the catalyst activity and selectivity toward sulfur was studied. High-temperature reactor tests indicated that the MIL-101(Cr)–NPG50–Mo could be a promising candidate with conversion and selectivity of 100% and 99.5% at 200 °C. The MIL-101(Cr)–NPG50–Mo stability showed there were not any significant changes in physical properties, the activity was evaluated after 20 h which was completely stable without any changes  

Two nanocatalysts of palladium over multi-walled carbon nanotubes (MWCNT) were synthesized and their catalytic properties evaluated in selective hydrogenation of acetylene. Different procedures were applied to synthesize catalysts which resulted in two distinct average particle sizes of palladium (Pd) over the MWCNT. The resulting catalysts displayed dissimilar NH3-TPD behaviors as well as different selectivity performances at lower temperatures. While enhancement of the hydrogen transfer mechanism occurred upon the temperature increase, similar behaviors for the aforementioned materials were obtained. Furthermore, it was revealed that the catalytic performance at higher temperatures did not... 

The use of 1,3-bis(N-heterocyclic)carbene ligands with different alkyl wingtip groups (alkyl = methyl, isopropyl and tert-butyl) is an effective method for the palladium-catalysed direct S-arylation of methylphenyl sulfoxide and C–C coupling of various of aryl halides with alkenes. The reactions proceed in moderate to good yields. Interestingly, it is shown experimentally that, by using bulkier bidentate N-heterocyclic carbene ligands, more selective catalytic systems towards cis products in Heck coupling reactions can be achieved. Copyright © 2016 John Wiley & Sons, Ltd  

The preparation and characterization are presented of a new catalytic material comprising Mg–Al layered double hydroxide and intercalated manganese(III) 5,10,15,20-tetrakis(4-benzoate)porphyrinacetate. Characterization was realized via various techniques. The prepared composite exhibited excellent catalytic activity in the selective epoxidation of various olefins with tetra-n-butylammonium hydrogen monopersulfate as an oxidant under mild reaction conditions. Furthermore, the catalytic system could be reused nine times without significant reduction in conversion percentage and any special care or additional treatment of the catalyst. © 2018 John Wiley & Sons, Ltd  

The preparation and characterization are presented of a new catalytic material comprising Mg–Al layered double hydroxide and intercalated manganese(III) 5,10,15,20-tetrakis(4-benzoate)porphyrinacetate. Characterization was realized via various techniques. The prepared composite exhibited excellent catalytic activity in the selective epoxidation of various olefins with tetra-n-butylammonium hydrogen monopersulfate as an oxidant under mild reaction conditions. Furthermore, the catalytic system could be reused nine times without significant reduction in conversion percentage and any special care or additional treatment of the catalyst. © 2018 John Wiley & Sons, Ltd  

The preparation and characterization are presented of a new catalytic material comprising Mg–Al layered double hydroxide and intercalated manganese(III) 5,10,15,20-tetrakis(4-benzoate)porphyrinacetate. Characterization was realized via various techniques. The prepared composite exhibited excellent catalytic activity in the selective epoxidation of various olefins with tetra-n-butylammonium hydrogen monopersulfate as an oxidant under mild reaction conditions. Furthermore, the catalytic system could be reused nine times without significant reduction in conversion percentage and any special care or additional treatment of the catalyst. © 2018 John Wiley & Sons, Ltd  

The use of 1,3-bis(N-heterocyclic)carbene ligands with different alkyl wingtip groups (alkyl = methyl, isopropyl and tert-butyl) is an effective method for the palladium-catalysed direct S-arylation of methylphenyl sulfoxide and C-C coupling of various of aryl halides with alkenes. The reactions proceed in moderate to good yields. Interestingly, it is shown experimentally that, by using bulkier bidentate N-heterocyclic carbene ligands, more selective catalytic systems towards cis products in Heck coupling reactions can be achieved  

Liquid phase hydro-purification of crude terephthalic acid (CTA) was performed using supported Pd and Pd-Sn catalysts on functionalized multi-wall carbon nanotubes (FMWCNT). Pd/FMWCNT catalysts were prepared by wet impregnation with Pd loadings of 0.05 to 0.6 wt.%. Pd-Sn/FMWCNT catalysts were prepared by co-impregnation (CI) and successive impregnation (SI) using 0.3 wt.% Pd loading and Sn/Pd molar ratios of 0.1 and 0.35 for the CI method and 0.05 to 0.35 for the SI method. Pd loading of 0.3 wt.% for Pd/FMWCNT was sufficient to decrease the 4-carboxybenzaldehyde (4-CBA) content of CTA from 2100 ppm to 5.5 ppm without excessive hydrogenation of terephthalic acid (TA). The commercial catalyst... 

The brain-computer interfacing (BCI), a platform to extract features and classify different motor movement tasks from noisy and highly correlated electroencephalogram signals, is limited mostly by the complex and power-hungry algorithms. Among different techniques recently devised to tackle this issue, real-time onset detection, due to its negligible delay and minimal power overhead, is the most efficient one. Here, we propose a novel algorithm that outperforms the state-of-the-art design by sixfold in terms of speed, without sacrificing the accuracy for a real-time, hand movement intention detection based on the adaptive wavelet transform with only 1 s detection delay and maximum... 

A novel bi-functional polymeric catalyst was synthesized by immobilization of tungstate anions onto the nitrogen rich poly(ionic liquid)/magnetic nanocomposite. The resulting catalyst has two types of catalytic sites: (i) immobilized WO4 anions with bis-imidazolium ionic liquid cation for selective oxidation of alcohols and (ii) basic amine groups for Knoevenagel condensation between produced aldehyde and malononitrile. Due to the polymeric nature of the catalyst, large amounts of tungstate and basic nitrogen groups were presented on the solid surface which led to a decrease in the applied catalyst mass for catalytic reaction. High catalytic activity and excellent selectivity of catalyst in... 

In this research, the activity and selectivity of a platinum-based catalyst for H2 production through aqueous phase reforming (APR) in a fixed-bed reactor (FBR) as well as, a structured catalyst microreactor (MR) were investigated. In this venue, first, an in-house designed MR was fabricated and the catalytic material was deposited on the channel walls of this steel made reactor. After verification of the stability of the coated layer, the prepared reactor was employed to investigate the APR reaction. In this regard, APR of the ethylene glycol and glycerol over Pt/Al2O3 and Pt/CeO2–Al2O3 catalyst were conducted in an MR and FBR. Obtained results demonstrated that employing Pt/CeO2–Al2O3 as a... 

In this study, Fe3O4@Au/metal-organic frameworks (Fe3O4@Au/MOF) nanocomposite with flower-like core-shell structure was successfully synthesized via a hydrothermal route. The as-prepared catalyst was characterized using different techniques such as FT-IR, XRD, TEM, EDX, VSM, TGA, BET, and ICP. This nanocomposite exhibited an excellent catalytic performance in selective oxidation of cyclohexene to 2-cyclohexene-1-one by using molecular oxygen as green oxidant. The influence of reaction conditions including, pressure of molecular oxygen, temperature, time, solvent, and amount of catalyst on conversion and selectivity of products were evaluated. The activation energy (Ea) of the reaction was...