Sharif Digital Repository

Polyaniline/graphene oxide (PANI/GO) co-doped with Zn2+ and Fe3+ was synthesized via a simple and low cost one-step chronoamperometry method on stainless steel (SS) as the substrate. The Fe3+-Zn2+-PANI/GO nanocomposite is characterized using X-ray diffraction as well as Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and field emission scanning electron microscopy. Also, cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy are used to study the electrochemical performance of the as-prepared electrode materials. Significantly, the Fe3+-Zn2+-PANI/GO nanocomposite exhibits a specific... 

Polyaniline/graphene oxide (PANI/GO) co-doped with Zn2+ and Fe3+ was synthesized via a simple and low cost one-step chronoamperometry method on stainless steel (SS) as the substrate. The Fe3+-Zn2+-PANI/GO nanocomposite is characterized using X-ray diffraction as well as Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and field emission scanning electron microscopy. Also, cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy are used to study the electrochemical performance of the as-prepared electrode materials. Significantly, the Fe3+-Zn2+-PANI/GO nanocomposite exhibits a specific... 

Supercapacitors store charge by ion adsorption or fast redox reactions on the surface of porous materials. One of the bottlenecks in this field is the development of biocompatible and high-rate supercapacitor devices by scalable fabrication processes. Herein, a Ti-rich anatase TiO2 material that addresses the above-mentioned challenges is reported. Tubular nanolettuces were fabricated by a cost-effective and fast anodization process of Ti foil. They attained a large potential window of 2.5 V in a neutral electrolyte owing to the high activation energy for water splitting of the (1 0 1) facet. Aqueous and all-solid-state devices showed diffusion time constants of 46 and 1700 ms, as well as... 

In this work, nanostructured composites of Cr2O3-graphene oxide (Cr2O3/GO) with conducting polymers; polyaniline (PANI) and polypyrrole (PPy) with the shape of cauliflower were synthesized via s simple and low cost one-step chronoamperometry method. The structures and morphologies of the resulting ternary nanocomposites were characterized by using Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The electrochemical capacitive properties of the prepared nanocomposites were evaluated by using cycle voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy. The... 

In this study, a thermal method was used to synthesize spinel NiCo2O4 and carbon nanotubes (CNTs)@NiCo2O4 with an average size 50 nm and 20 nm, respectively. Addition of CNTs into NiCo2O4 noticeably increases the active surface area compared to pure spinel NiCo2O4. SEM analyses showed that the morphologies are spherical in both pure and composite samples. Uniform CNTs@NiCo2O4 nanoparticles exhibit high specific capacitance of 210 F g−1 at 2 A g−1 and a good retention capacity of 92.70% after 2500 cycles, which shows a considerable improvement compared to NiCo2O4. Additionally, an exceptional rate capability of about 73.2% was obtained at 50 A g−1. Such remarkable electrochemical performance... 

Nitrates of lithium, cobalt and nickel are utilized to synthesize LiNi 0.8Co0.2O2 cathode material through sol-gel technique. Various synthesis parameters such as calcination time and temperature as well as chelating agent are studied to determine the optimized condition for material processing. Using TG/DTA techniques, the optimized calcination temperatures are selected. Different characterization techniques such as ICP, XRD and TEM are employed to characterize the chemical composition, crystal structure, size and morphology of the powders. Micron and nano-sized powders are produced using citric/oxalic and TEA as chelating agent, respectively. Selected powders are used as cathode material... 

The low thermal conductivity of phase change materials (PCM) results in the slowdown in the discharging process of PCM which limits the usability of these materials in the field of Thermal Energy Storage (TES). In this research, an innovative solution is proposed to significantly accelerate the solidification speed, up to two orders of magnitude greater than conventional methods. Using acetone as the intermediate boiling fluid (IBF), the paraffin discharge rate as a phase-change material is significantly improved which is known as super-fast discharge (SFD) in this article. In this method, liquid acetone takes the heat by boiling in liquid paraffin and causes it to solidify. As the liquid... 

The present work describes the preparation and electrochemical characterization of RuO2/MWCNT/Stainless Steel Mesh (SSM) electrode as compared with a MWCNT/SSM electrode in the positive half-cell of a Vanadium Redox Flow Battery (VRFB). The electrochemical characterization of prepared electrode was carried out using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge procedures. The electrochemical activity of MWCNT/SSM modified with RuO2 as positive electrode in a VRFB was notably improved. The RuO2-included electrodes demonstrated high peak current ratio, small peak potential difference and high electron... 

We recently reported an impressive cycling stability (over 20,000 cycles) of titanium nitride (TiN) electrodes with high specific capacitance. It is anticipated that nitrogen (β−N) doping in the oxidized surface of TiN film plays a crucial role in charge storage mechanism and stability of this material. In this work, we offer an evidence on the effect of β−N doping on improvement in specific capacitance of vacuum annealed TiN thin films. The annealing of the TiN films leads to the diffusion of the excess β−N from sub-surface to oxidized TiN film surface without further oxidation of the electrode surface. We demonstrate an increase in the TiN areal capacitance upon an increase in the amount... 

Membrane separator based on the polyvinylidene fluoride (PVDF) is prepared via the non-solvent-induced phase separation (NIPS) method with water and ethanol as non-solvent and a mixture of dimethylformamide (DMF) and acetone as solvent. The effect of various acetone/DMF ratios and non-solvent material on the physical and electrochemical properties of the separator is studied by FE-SEM, tensile strength, electrochemical AC-impedance spectroscopy (EIS), thermal stability, and linear sweep voltammetry (LSV). The charge-discharge studies are carried out by fabricating a lithium foil/polymer electrolyte membrane/LiFePO4 cell. The results show that with the change of solvent and non-solvent, the... 

This paper proposes a novel optimization based home load control (HLC) to manage the operation periods of responsive electrical appliances, determine several recommended operation periods for nonresponsive appliances, and schedule the charge/discharge cycling of plug-in hybrid electric vehicle (PHEV) considering various customer preferences. The customer preferences are in the format of payment cost, interruption cost, and different operational constraints. The projected algorithm is online, in which household appliances are initially scheduled based on the payment cost, and when the home load is interrupted, the scheduling will be updated to minimize customer interruption cost. Due to... 

Nanostructured molybdenum oxide was potentiodynamically deposited onto a stainless steel surface from an aqueous bath by cycling the potential between 0 and -0.75 V vs. Ag/AgCl. The deposit consisted of particulates in the range of 30 to 80 nm. Electrochemical studies under galvanostatic charge/discharge and also impedance spectroscopy revealed capacitive behavior in the potential range of -0.3 to -0.55 V vs. Ag/AgCl with the value of 477 F g-1 at 0.1 mA/cm2. An equivalent circuit comprising of three parallel branches consisting of double-layer capacitance, Warburg impedance, and a constant phase element signifying pseudo-capacitance each coupled with their corresponding resistances was... 

SnS2-SnO2 nano-heterostructures are synthesized with two different precursors of thioacetamide (TAA) and thiourea (TU) at various solvent ratios (SR) of ethanol and water by using a facile, economical, scalable, and cost-effective solvothermal method. The obtained products have been characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), and Brunauer–Emmet–Teller (BET) techniques. It is found that different precursors and various SR values have an influence on the composition and morphologies of the prepared nanostructures, leading to variation in capacitive behavior of the fabricated electrodes.... 

A new ternary nanocomposite based on graphene oxide (GO), polypyrrole (PPy) and vanadium pentoxide (V2O5) is obtained via one-step electrochemical deposition process. Electrochemical deposition of V2O5, PPy and GO on a stainless steel (SS) substrate is conducted from an aqueous solution containing vanadyl acetate, pyrrole and GO to get V2O5/PPy/GO nanocomposite. Characterization of the electrode material is carried out by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and atomic force microscopy (AFM). The electrochemical performance of the as-prepared nanocomposite is evaluated by... 

Here in, for the first time, we report a new and simple procedure for preparing reduced graphene oxide/nickel-cobalt double layered hydroxide composite on the nickel foam (Ni-Co LDH/rGO/NF) via a fast and simple two-step electrochemical method including potentiostatic routes in the presence of CTAB as a cationic surfactant. Graphene oxide coated nickel foam prepared by simple immersion method. After that, the prepared electrode reduced electrochemically to obtain rGO/NF electrode. Finally, the rGO/NF electrode was used as cathode for electrodeposition of Ni-Co LDH in the presence of CTAB as cationic surfactant. The prepared electrodes were characterized by field emission scanning electron... 

Here in, for the first time, we report a new and simple procedure for preparing reduced graphene oxide/nickel-cobalt double layered hydroxide composite on the nickel foam (Ni-Co LDH/rGO/NF) via a fast and simple two-step electrochemical method including potentiostatic routes in the presence of CTAB as a cationic surfactant. Graphene oxide coated nickel foam prepared by simple immersion method. After that, the prepared electrode reduced electrochemically to obtain rGO/NF electrode. Finally, the rGO/NF electrode was used as cathode for electrodeposition of Ni-Co LDH in the presence of CTAB as cationic surfactant. The prepared electrodes were characterized by field emission scanning electron... 

The controlled growth of metal oxide nanostructures within hierarchically porous conductive carbon-based frameworks is critically important to achieving high volumetric performance and appropriate channel size for energy storage applications. Herein, we grow cobalt oxide (Co3O4) nanoflakes, using a sequential-electrodeposition process, into spherically porous sponge-like few-layer partially reduced graphene oxide (SrGO) synthesized by template-directed ordered assembly. Maximum specific/volumetric capacitances of 1112 F gCo3O4-1 (at 3.3 A gCo3O4-1), 178 F cm-3 (at 2.6 A cm-2), and 406 F gtotal-1 (at 1 A gtotal-1) and sensible rate capability (80% retention by increasing the charge/discharge... 

The preparation of composite manganese dioxide (MnO2) nanoparticles in an ordered mesoporous carbon (CMK-3) matrix and its use for constructing a new wide-potential-window supercapacitor is reported. CMK-3 is prepared using mesoporous silica as a hard template and sucrose as carbon source. The different ratios of MnO2/CMK-3 composite is synthesized by impregnating CMK-3 with a Mn(NO3)2·4H 2O solution followed by annealing in nitrogen. Physical properties, morphology, and specific surface area were characterized by X-ray diffraction, transmission electron microscopy, and nitrogen sorption measurements, respectively. The electrochemical properties of the composite were studied by cyclic... 

This paper presents a decentralized load sharing and power management method for an islanded microgrid composed of PV units, battery units and hybrid PV/battery units. The proposed method performs all the necessary tasks such as load sharing among the units, battery charging and discharging and PV power curtailment with no need to any communication among the units. The proposed method is validated experimentally  

In this article, the novel concept of using magnetic nanofluidic electrolyte for redox flow batteries is demonstrated for the first time. In this regard, the stable magnetic nanofluidic electrolytes are prepared by dispersing magnetic modified multiwalled carbon nanotubes (MMWCNTs) in the positive electrolyte of a polysulfide-iodide redox flow battery at mass concentrations of less than 0.3 g L−1. The electrochemical behavior of magnetic nanofluidic electrolyte was examined using cyclic voltammetry at different mass concentrations of MMWCNTs with a carbon felt electrode. Higher and stable peak current densities were observed at larger mass concentrations of MMWCNTs. A polysulfide-iodide...