Sharif Digital Repository

Graphene nanoribbons (GNRs) fabricated using electron beam lithography are investigated using tip-enhanced Raman spectroscopy (TERS) with a spatial resolution of 5 nm under ambient conditions. High-resolution TERS imaging reveals a structurally modified 5-10 nm strip of disordered graphene at the edge of the GNRs. Furthermore, hyperspectral TERS imaging discovers the presence of nanoscale organic contaminants on the GNRs. These results pave the way for nanoscale chemical and structural characterisation of graphene-based devices using TERS. © The Royal Society of Chemistry 2021  

Mixing has become a challenge in micro-fluidic systems because of the low Reynolds number in micro-channels. The method which is implemented in this paper is to use freely-swimming bacteria to enhance the mixing process. Accordingly, the Serratia marcescens bacteria were used for this matter. The mixing performance of the system is quantified by measuring the diffusion rate of Rhodamine B in a particular section of a channel connected to a chamber with varying Rhodamine B concentration. The concentration of Rhodamine B was measured using the Laser Induced Fluorescence (LIF) technique. The channel is in the form of a pipe and is closed on the extending side. In this paper, it is demonstrated... 

Recently, graphene oxide and its unconventional magnetism have attracted much interest due to their novel applications in spintronics, memory chips and theranostics. Owing to the excellent biocompatibility, cellular uptake, bio-conjugation possibilities, flexible chemical modification and characteristic broad-wavelength absorbance, graphene oxide and its derivatives have been utilized as contrast agents for various imaging modalities such as photoluminescence, photoacoustic or ultrasound. Despite their suitable applications in bioimaging and due to lack of magnetic moment, graphene oxide cannot confer magnetic resonance imaging contrast without incorporating the magnetic component. Such... 

We prepared single-phase polycrystalline Gd1-xPrx Ba2Cu3O7-δ samples with x = 0, 0.10, 0.15, and 0.20. The deoxygenation process of these samples was performed by an annealing method. Electrical resistivity measurements revealed depression of the transition temperature with the increase of x and δ. We calculated the hole concentration in the CuO2 plane for different values of x and δ. A linear dependence of transition temperature and hole concentration in the CuO2 plane was found as a function of 2δ + x. It is proposed that a combination of the localization and filling of holes should be considered as the effective mechanisms for the appearance of the Pr anomaly in HTSCs  

Titanium dioxide is a cheap, chemically stable and non-toxic material. However its photocatalytic properties are unstable and it is a modest semiconductor and a mediocre insulator. For several applications it would be interesting to make it either more insulating or more conducting. The goal of this work was to modify the photocatalytic properties of nano-crystalline TiO2 powders by wet chemical routes and hydrothermal methods to understand the mechanism leading to these modifications The principal factors that influence the photocatalytic properties are on the one hand the concentration and nature of the chemical and physical conditions in TiO2, and on the other hand the morphology of the... 

A new method for the fabrication of an electromagnetic nanocomposite based on Fe3O4 and polyaniline (PANI) is offered. The authors focused on improvement of the physical and electromagnetic properties of the nanocomposite using a new synthetic method. Supermagnetic Fe3O4 nanoparticles were synthesized through coprecipitation method. As a chemical modification, the third generation of poly (amidoamine) dendrimer was grafted on the surface of the nanoparticles. PANI was grafted from -NH2 functional groups of dendrimer via in situ polymerization of aniline. Finally, Au nanoparticles were loaded on the nanocomposite and its catalytic activity for reduction reactions was studied  

Promising properties of boron nitride nanomaterials such as their chemical, thermal, and mechanical stability have made them suitable materials in a various range of applications. However, their low electrical conductivity and wide bandgap, particularly in the case of boron nitride quantum dots (BNQDs), have given rise to severe limitations. Efforts on bandgap engineering through doping and surface functionalization have gained little success due to their high thermodynamic stability and inertness. Herein, we present a novel approach to functionalize BNQDs by hydroxyl, methyl, and amine functional groups aiming to adjust the electronic structure. The successful exfoliation is demonstrated by... 

At present, nanoparticles are used for various biomedical applications where they facilitate laboratory diagnostics and therapeutics. More specifically for drug delivery purposes, the use of nanoparticles is attracting increasing attention due to their unique capabilities and their negligible side effects not only in cancer therapy but also in the treatment of other ailments. Among all types of nanoparticles, biocompatible superparamagnetic iron oxide nanoparticles (SPIONs) with proper surface architecture and conjugated targeting ligands/proteins have attracted a great deal of attention for drug delivery applications. This review covers recent advances in the development of SPIONs together... 

Liposomes are known to be promising nanoparticles (NPs) for drug delivery applications. Among different types of self-assembled NPs, liposomes stand out for their non-toxic nature, and their possession of dual hydrophilic-hydrophobic domains. Advantages of liposomes include the ability to solubilize hydrophobic drugs, the ability to incorporate different hydrophilic and lipophilic drugs at the same time, lessening the exposure of host organs to potentially toxic drugs and allowing modification of the surface by a variety of different chemical groups. This modification of the surface, or of the individual constituents, may be used to achieve two important goals. Firstly, ligands for active... 

Liposomes are known to be promising nanoparticles (NPs) for drug delivery applications. Among the different types of self-assembled NPs, liposomes stand out for their non-toxic nature and their possession of dual hydrophilic-hydrophobic domains. The advantages of liposomes include the ability to solubilize hydrophobic drugs, the ability to incorporate different hydrophilic and lipophilic drugs at the same time, lessening the exposure of host organs to potentially toxic drugs and allowing modification of the surface by a variety of different chemical groups. This modification of the surface, or of the individual constituents, may be used to achieve two important goals. First, ligands for... 

A nanocomposite of silica-polydiphenylamine doped with silver nanoparticles (Ag-SiO2-PDPA) was successfully synthesized by the sol-gel process. For its preparation, PDPA was mixed with butanethiol capped Ag nanoparticles (NPs) and added to the silica sol solution. The Ag NPs were stabilized as a result of their adsorption on the SiO2 spheres. The surface characteristic of nanocomposite was investigated using scanning electron microscopy (SEM). In this work the Ag-SiO2-PDPA nanocomposite was employed as an efficient sorbent for micro-solid-phase extraction (μ-SPE) of some selected pesticides. An amount of 15 mg of the prepared sorbent was used to extract and... 

A carbon paste electrode (CPE) modified with 2,2′-[1,2 butanediylbis(nitriloethylidyne)]-bis-hydroquinone (BBNBH) and TiO2 nanoparticles was used for the sensitive voltammetric determination of epinephrine (EP). The electrochemical response characteristics of the modified electrode toward EP and acetaminophen (AC) were investigated by cyclic and differential pulse voltammetry (CV and DPV). The results showed an efficient catalytic activity of the electrode for the electrooxidation of EP, which leads to a reduction in its overpotential by more than 270 mV. The effects of pH and potential sweep rate on the mechanism of the electrode process were investigated. The modified electrode exhibits an... 

Blood oxygenation is the main performance characteristic of capillary membrane oxygenators (CMOs). Handling of natural blood in in vitro investigations of CMOs is quite complex and time-consuming. Since the conventional blood analog fluids (e.g. water/glycerol) lack a substance with an affinity to capture oxygen comparable to hemoglobin's affinity, in this study a novel approach using modified sulfite solution is proposed to address this challenge. The solution comprises sodium sulfite as a component, simulating the role of hemoglobin in blood oxygenation. This approach is validated by OTR (oxygen transfer rate) measured using native porcine blood, in two types of commercially available... 

Enzymatic removal of Bisphenol A (BPA), acknowledged as an environmentally friendly approach, is a promising method to deal with hard degradable contaminants. However, the application of “enzymatic treatment” has been limited due to lower operational stability and practical difficulties associated with recovery and recycling. Enzyme immobilization is an innovative approach which circumvents these drawbacks. In this study, laccase from Trametes hirsuta was used for BPA removal. Amino-functionalized magnetic Fe3O4 nanoparticles were synthesized via the co-precipitation method followed by surface modification with (3-aminopropyl)trimethoxysilane (APTMS). The as-prepared nanoparticles were... 

Methods for the regioselective C-H borylation and subsequent cross-coupling of the 2,1-borazaronaphthalene core are reported. Azaborines are dependent on B-N/C=C isosterism when employed in strategies for developing diverse heterocyclic scaffolds. Although 2,1-borazaronaphthalene is closely related to naphthalene in terms of structure, the argument is made that the former has electronic similarities to indole. Based on that premise, iridium-mediated C-H activation has enabled facile installation of a versatile, nucleophilic coupling handle at a previously inaccessible site of 2,1-borazaronaphthalenes. A variety of substituted 2,1-borazaronaphthalene cores can be successfully borylated and... 

Radiopacity is sometimes an essential characteristic of biomaterials that can help clinicians perform follow-ups during pre- and post-interventional radiological imaging. Due to their chemical composition and structure, most bioceramics are inherently radiopaque but can still be doped/mixed with radiopacifiers to increase their visualization during or after medical procedures. The radiopacifiers are frequently heavy elements of the periodic table, such as Bi, Zr, Sr, Ba, Ta, Zn, Y, etc., or their relevant compounds that can confer enhanced radiopacity. Radiopaque bioceramics are also intriguing additives for biopolymers and hybrids, which are extensively researched and developed nowadays for... 

This paper outlines a quantitative risk assessment for an 110,000 ton/day ethylene oxide production plant in Iran. After a complete and detailed hazard identification study, done by HAZOP method, the purification column was found to be one of the most hazardous sections in this plant. As ethylene oxide with high concentration and inventory is present there. Fault tree analysis (FTA) technique has been used to identify the basic events responsible for top event occurrence and also calculation of top event frequency of occurrence. Human error has been calculated numerically and probability of human error has been estimated. Failure rate data were collected referring to several sources and... 

Modified tungsten oxide films by vanadium oxide provide neutrally coloring electrochromic electrodes for smart windows technology. In this study W-V-O mixed oxide films were fabricated by Nd:YAG pulsed laser deposition (PLD), λ=1064 nm, from mixed pressed powders of (WO3)1-x(V2O5)x, x=0, 0.09, 0.17, 0.23, 0.29 and 0.33, at 13.3 Pa oxygen partial pressure and 200 °C temperature on glass substrates. X-ray photoelectron spectroscopy (XPS) revealed V5+, V4+, W6+ and W5+ surface oxide states, where the ratio of W5+/W6+ enhances by the amount of vanadium in the films. Surface morphology was studied by scanning electron microscope (SEM) and optical properties by transmission-reflection spectra....