Sharif Digital Repository

The quality of perovskite films plays a crucial role in improving the optoelectronic properties and performance of perovskite solar cells (PSCs). Herein, high-quality CsxFA1−xPbI3 perovskite films with different compositions (x = 0, 5, 10, and 15) are achieved by controlling the amount of cesium chloride (CsCl) in the respective FAPbI3 precursor solution. The effects of CsCl addition on the morphological and optoelectronic properties of the resulting perovskite films and on the performance of the corresponding devices are systematically studied. Introduction of CsCl into FAPbI3 shows a great potential to stabilize the α-FAPbI3 perovskite phase by forming CsxFA1−xPbI3 films with improved... 

Gold-catalyzed cyclization of 1,5-diynes with ketones as reagents and solvent provides diversely substituted vinyl ethers under mild conditions. The regioselectivity of such gold-catalyzed cyclizations is usually controlled by the scaffold of the diyne. Herein, we report the first solvent-controlled switching of regioselectivity from a 6-endo-dig- to 5-endo-dig-cyclization in these transformations, providing fulvene derivatives. With respect to the functional-group tolerance, aryl fluorides, chlorides, bromides, and ethers are tolerated. Furthermore, the mechanism and selectivity are put to scrutiny by experimental studies and a thermodynamic analysis of the product. Additionally,... 

In this research, we investigate the effect of alkali metal cations including Li, Na and Cs in hydrothermal solution on the morphology, stability, and photoactivity of nanostructured TiO2 nanoflakes as a photoanode. The TiO2 nanoflakes are formed through hydrothermal treatment of Ti foil in 1.0 M LiOH, NaOH or CsOH at 100 °C for 3 h. By subsequent thermal reduction of the structure in an optimized Ar/H2 environment, conductive TiO2 nanoflakes were formed. The reduction treatment remarkably improves the photocurrent density of the TiO2 nanoflakes and has the highest impact on the sample treated in the NaOH alkali solution. For the nanoflakes produced in NaOH alkali solution, the bandgap is... 

The interfacial properties of crude oil are highly complex and are not yet well understood. This study aimed to evaluate the effect of temperature (30-80°C) and pressure (3.44-27.58MPa) on the dynamic interfacial tension (IFT) of crude oil/aqueous solutions consisting of 15000ppm of salt containing different chloride anions, e.g. NaCl, KCl, MgCl2, and CaCl2. To reach this goal, several parameters, such as dynamic and equilibrium IFT, adsorption time, diffusivity of resin, and asphaltene as surface-active agents from bulk of crude oil towards fluid/fluid interface and surface excess concentration of them at the interface, were compared as a function of temperature, pressure, and ion type. The... 

The interfacial properties of crude oil are highly complex and are not yet well understood. This study aimed to evaluate the effect of temperature (30–80 °C) and pressure (3.44–27.58 MPa) on the dynamic interfacial tension (IFT) of crude oil/aqueous solutions consisting of 15 000 ppm of salt containing different chloride anions, e.g. NaCl, KCl, MgCl2, and CaCl2. To reach this goal, several parameters, such as dynamic and equilibrium IFT, adsorption time, diffusivity of resin, and asphaltene as surface-active agents from bulk of crude oil towards fluid/fluid interface and surface excess concentration of them at the interface, were compared as a function of temperature, pressure, and ion type.... 

Tolyltriazole (TTA) is a well-defined corrosion inhibitor for copper and copper alloys. However, there is little literature about its corrosion inhibition performance for mild steels in corrosive environments. This paper studied the electrochemical behavior of TTA in 0.5 M HCl solutions. Also, the morphology and nature of TTA layers on the steel surface were investigated. Electrochemical results showed that TTA is an excellent corrosion inhibitor for mild steel in acidic media with an efficiency of 91% for 0.07 M concentration. The results also indicated that TTA is a mixed-type inhibitor. XRD analysis revealed that the inhibition mechanism of TTA is based on the formation of an organic film... 

Batch culture of Azohydromonas lata was investigated for the production of intracellular poly-b-hydroxybutyrate (PHB). In order to determine the C:N value of the culture media for maximizing the microbial productivity of PHB, different concentrations of glucose and ammonium chloride were used as carbon and nitrogen sources, respectively. The optimal temperature and shaking rate was obtained at 30_C and 180 rpm, respectively. The maximum intracellular PHB concentration obtained was 5.09 g/l, which was 20% (w/w) of the cell dry weight (CDW) after 72 h. Also, the synthesis of PHB was growth associated with the C:N ratio of 153.71. The maximum calculated Yp/s was 0.212 (gr/gr) and the specific... 

The transformation of gibbsite to α-alumina occurs in the range 1100 to 1300°C. The higher the calcination temperature, the larger the crystallites and this leads to abnormal grain growth. The main goal of this research was to reduce the transformation temperature of gibbsite to α-alumina by reducing the gibbsite particles size. The sodium content of the gibbsite used in the study was reduced to less than 0.1% by washing it in HCl solution. It was then ground in a fast mill at ambient conditions for different times then calcined at different temperatures. The microstructure, particles size and thermal behaviour of the samples were examined with SEM, XRD, XRF, PSA and STA, respectively. In a... 

A multi-residue method using gas chromatography coupled with flame ionisation detector has been developed for simultaneous determination of 10 pesticides in milk. The methodology involved a sample clean-up procedure using ‘quick, easy, cheap, effective, rugged and safe’ followed by a preconcentration step based on dispersive liquid–liquid microextraction. In this regard, acetonitrile was added to the milk sample with specific pH and ionic strength, and the mixture was rigorously shaken. The extracts were centrifuged; then, the organic phase (acetonitrile) was transferred to a test tube and was mixed with deionised water. The mixture was sonicated and chloroform was added as an acceptor phase... 

In this paper, the hydrodynamic behaviour of the chemical reaction system (selenium, tellurium, and TBP) was interpreted in the Oldshue-Rushton extraction column. The optimum operating parameters for extracting the selenium and tellurium from chloride medium were carried out by using the batch experiments. The feed acidity of 5 molar and solvent phase with 20% (v/v) TBP in kerosene were optimised to examine the hydrodynamic parameters of the mentioned column. The impacts of operating variables such as rotor speed, inlet aqueous phase velocity, and inlet solvent phase velocity on the dispersed phase hold-up, mean drop size, slip velocity, drop size distribution, and extraction rate were... 

Polyamide 6 (PA6)/carbon nanotube (CNT)/conductive carbon black (CCB) nanocomposites with the incorporation of physical and chemical dispersants were prepared via melt blending method to examine the synergistic enhancement of electrical conductivity. Investigation of modified CNT with octadecyl triphenyl phosphonium chloride (OTPC-CNT) as physical dispersant was performed by Fourier transform infrared, nuclear magnetic resonance, Raman spectroscopy, and thermogravimetric analysis. Morphological, electrical, rheological, and mechanical properties of PA6/CNT/CCB nanocomposites were examined by field emission scanning electron microscopy, transmission electron microscopy, digital insulation... 

In this research, the separation of tellurium from selenium was studied from chloride solution by TBP extractant. In the batch experiments, the experimental findings indicated that the feed acidity, TBP concentration, and contact time were optimized to achieve the high separation factor. In continuous mode of pulsed disc and doughnut column, the impacts of operating parameters have been discussed on the distribution coefficients of selenium and tellurium, and mass transfer enhancement. A new model for predicting Koca was proposed in terms of holdup values, Sherwood, Reynolds, and Schmidt numbers, which has an acceptable agreement with the mass transfer data. © 2020 Taylor & Francis Group,... 

Polyamide 6 (PA6)/carbon nanotube (CNT)/conductive carbon black (CCB) nanocomposites with the incorporation of physical and chemical dispersants were prepared via melt blending method to examine the synergistic enhancement of electrical conductivity. Investigation of modified CNT with octadecyl triphenyl phosphonium chloride (OTPC-CNT) as physical dispersant was performed by Fourier transform infrared, nuclear magnetic resonance, Raman spectroscopy, and thermogravimetric analysis. Morphological, electrical, rheological, and mechanical properties of PA6/CNT/CCB nanocomposites were examined by field emission scanning electron microscopy, transmission electron microscopy, digital insulation... 

The transformation of gibbsite to α-alumina occurs in the range 1100 to 1300°C. The higher the calcination temperature, the larger the crystallites and this leads to abnormal grain growth. The main goal of this research was to reduce the transformation temperature of gibbsite to α-alumina by reducing the gibbsite particles size. The sodium content of the gibbsite used in the study was reduced to less than 0.1% by washing it in HCl solution. It was then ground in a fast mill at ambient conditions for different times then calcined at different temperatures. The microstructure, particles size and thermal behaviour of the samples were examined with SEM, XRD, XRF, PSA and STA, respectively. In a... 

In this paper, the hydrodynamic behaviour of the chemical reaction system (selenium, tellurium, and TBP) was interpreted in the Oldshue-Rushton extraction column. The optimum operating parameters for extracting the selenium and tellurium from chloride medium were carried out by using the batch experiments. The feed acidity of 5 molar and solvent phase with 20% (v/v) TBP in kerosene were optimised to examine the hydrodynamic parameters of the mentioned column. The impacts of operating variables such as rotor speed, inlet aqueous phase velocity, and inlet solvent phase velocity on the dispersed phase hold-up, mean drop size, slip velocity, drop size distribution, and extraction rate were... 

A multi-residue method using gas chromatography coupled with flame ionisation detector has been developed for simultaneous determination of 10 pesticides in milk. The methodology involved a sample clean-up procedure using ‘quick, easy, cheap, effective, rugged and safe’ followed by a preconcentration step based on dispersive liquid–liquid microextraction. In this regard, acetonitrile was added to the milk sample with specific pH and ionic strength, and the mixture was rigorously shaken. The extracts were centrifuged; then, the organic phase (acetonitrile) was transferred to a test tube and was mixed with deionised water. The mixture was sonicated and chloroform was added as an acceptor phase... 

Water-in-oil emulsion usually forms during waterflooding in some heavy oil reservoirs. The composition and salinity of the injected water critically affect the w/o emulsion droplet size distribution, which control the emulsion stability and emulsion flow in porous media. The aim of the present work is to assess the effect of different sea water salinities on w/o emulsion stability through microscopic imaging. Therefore, w/o emulsions were prepared with different sea water samples, which were synthesized to resemble Persian Gulf, Mediterranean, Red Sea, and North Sea water samples. The results showed that log-normal distribution function predicts very well the experimental data to track the... 

A new gelator based of oleylamide has been introduced, which was gelled nonpolar hydrocarbon and CCl4 solvents through self-assembly. Also, the gelator formed a two-component hydrogel in combination with SDS, an anionic surfactant. UV-Vis studies revealed that the H-type and J-type aggregation of organogels in hexane and hydrogel in water, respectively. The xerogel, obtained by evaporating the solvent of organogel, selectively gelled and adsorbed oil spills on water surfaces. The effect of the various parameters, including temperature, water acidity and pH on the oil spill adsorption was studied, revealing the high ability of the xerogel to removing the oil contamination from water in up to... 

Despite various applications of hydrogels, they have poor gel strength and low resistance against crack propagation which lead to the limitation of their applications. For overcoming this inherent weakness, the current study has focused on the simultaneous utilization of interpenetrating polymer network (IPN) structure and nanocomposite hydrogels. It is known that IPN and nanocomposite gels can improve gel strength. The combination of IPN and nanocomposite structure was developed in hydrogels for improving gel strength. For this purpose, bentonite was successfully modified with a cationic surfactant, (3-methacrylamidopropyl) trimethyl ammonium chloride (MAPTAC), as intercalate, and... 

Abstract: In this investigation, monodisperse CuGaS2 nanoparticles intended for use as visible-light-absorbing materials were synthesized using a facile one-step heating method that involved dissolving the precursors copper chloride, gallium acetylacetonate, and thiourea in a solvent consisting of either oleylamine alone or a combination of oleylamine, oleic acid, and 1-octadecene. The shapes of the resulting nanoparticles were either elongated, polygonal, or a mixture of both, depending on whether the crystal structure of the nanoparticles was predominantly wurtzite, predominantly chalcopyrite, or a more balanced mixture of both wurtzite and chalcopyrite (i.e., the nanoparticles were...