Sharif Digital Repository

In this paper, we study theoretically the generation of high repetition rate short pulses using fiber optical parametric amplification. We show that the pulse shape and duration depend on the signal location relatively to the pump frequency. We demonstrate that in order to get the shortest pulse width, the signal must be located at one of the extremities of the gain spectrum associated with the pump peak power. We derive the analytical expression of the pulse shape in this case and compare it to the exponential gain regime case. Using numerical simulations, we also analyze the impact of walk-off and pump phase modulation that is required to suppress Stimulated Brillouin Scattering and derive... 

In this paper we study and evaluate the performance of a spectral-phase encoded optical CDMA (SPE-OCDMA) system using advanced receiver structures based on second harmonic generation (SHG) effect imposed in a Thick or Thin crystal. This receiver structure is employed as the nonlinear pre-processor prior to the conventional low-speed photodetector. In our performance evaluation amplified spontaneous emission (ASE) of the optical amplifiers, receiver front end thermal noise and photodetector shot noise which are effective in low power conditions, and multiple access interference (MAI) noise which is the dominant source of noise in high power conditions in any coherent OCDMA communications... 

Detection of ultrashort light pulses with conventional bandlimited photodetectors can lead to substantial performance degradation in digital lightwave communication systems. All-optical nonlinear processing of the received field prior to the optical to electrical conversion can greatly overcome this problem. In this letter, through a decision-theoretic framework and using a basic invariance property of the photodetector, we obtain the optimal zero-memory nonlinear element and evaluate its performance. Possible suboptimum nonlinearities are also investigated and their performance is examined. The results in this letter strongly justify the intuitive use of power-law devices, such as those... 

In this paper we present and investigate a digital design and implementational details of a wireless optical CDMA (OCDMA) system based on generalized optical orthogonal codes (OOCs). A detailed digital implementation analysis and transmitter/receiver architectures in the context of the above design are fully studied. We analyze various subsystems for a wireless OCDMA system including detector and receiver structure, acquisition, and tracking blocks as well as evaluating their performance in a typical wireless OCDMA communication system. By analyzing two main parts of the system, namely, chip-level detector and OCDMA receiver blocks we evaluate the performance of the overall system.... 

In this paper, we study three types of jammers, namely, pulse-jammer, partial-band jammer, and follower-jammer, in a typical fiber-optic-based spectrally phase-encoded optical code division multiple-access (SPE-OCDMA) system. We analyze, mathematically, the effects of the aforementioned jammers on the performance of an SPE-OCDMA system for two scenarios, namely, ideal noiseless channel with an ideal optimum receiver and an ultrahigh-speed nonlinear receiver based on two-photon-absorption (TPA) in a noisy channel. Also, for each of the above cases, two types of modulation, namely, on-off keying (OOK) and two-code keying (2CK) are investigated and their system performances are compared. It is... 

In this paper, we present a novel multirate, differentiated quality of service (QoS) optical CDMA (OCDMA) system using multilevel signaling technique. The emphasis is on OCDMA systems employing multi-length variable-weight optical orthogonal codes (MLVW-OOC) as signature sequence. We begin by presenting a two-class variable-weight OCDMA system in which all users have the same energy level in one bit duration. As a consequence, high weight users transmit their corresponding optical pulses at a lower power while low weight users transmit their corresponding optical pulses at a higher power level. We show that using this multilevel signaling technique, while employing the well known optical AND... 

In this paper, we present an in depth analysis and discussions on the behavior and performance of using either thin or thick second harmonic generation (SHG) crystals prior to photodetector in ultrahigh-speed optically amplified digital lightwave communication systems. Our study begins by considering a conventional low-speed optically amplified lightwave receiver and study its performance in ultrahigh-speed regime and show its substantially degraded behavior, indicating the need to use advance optical nonlinear elements such as SHG prior to photodetection. In studying SHG effects, we begin by discussing the mathematical models of thin and thick SHG crystals in the context of statistical... 

In this paper we study the performance of spectrally-encoded spread-time (SE/ST) technique when applied to ultrawideband (UWB) signals in the context of wireless code-division multiple-access (CDMA) communication. In this technique UWB pulses are spectrally encoded with pseudorandom codes that are assigned uniquely to each user. We shall show that the SE/ST ultrawideband system provides an appropriate multi-user capacity in realistic UWB channels, along with the ability of narrowband interference (NBI) suppression. To this end, after obtaining a suitable statistical model for spectrally encoded spread-time signals, we investigate the performance of the system in the presence of... 

In this letter we consider optimum code structure for positive optical code division multiple-access (optical CDMA) systems. Positive systems are a class of systems that operate with positive real numbers only. We consider the effect of multipleaccess interference in our model and show that code design for both On-Off Keying (OOK) and Binary PPM optical CDMA systems results in the same solutions. Furthermore, we show that a class of codes known as optical orthogonal codes (OOCs) are the best possible positive codes. In obtaining the results we define normalized divergence based on signal-to-multipleaccess interference ratio (SIR) for a multiple-access system in a useful manner and use it as... 

In this paper we examine the transmission of two types of ultra-wideband (UWB) signals, multiband orthogonal frequency division multiplexing (MB-OFDM) and impulse radio ultra-wideband (IR-UWB), over single mode fiber at 1550 nm. In order to investigate the impact of optical components such as laser diode, external modulator and single mode fiber on UWB signals, we develop mathematical models for these components. These models are experimentally verified and corresponding numerical parameter values are obtained by experiment. Using these models we discuss the transmission of two types of UWB signals over single mode fiber. A new figure of merit namely distortion factor is defined. Using... 

In this paper, we analyze and discuss the performance limits of optical clock recovery systems using a phase-locked loop (PLL) structure with nonlinear two-photon absorption (TPA) phase detection scheme. The motivation in analyzing the aforementioned optical PLL with TPA receiver structure is due to a recent successful experiment reported in . We characterize the mathematical structure of PLLs with TPA, so as to evaluate the performance limits on optical clock recovery mechanism. More specifically, we identify two intrinsic sources of phase noise in the system namely, the on- off nature of the incoming data pulses and the detector's shot noise that ultimately limit the performance of the... 

Distribution automation (DA) application for fault management in the electricity distribution networks is one of the main potential remedial actions to reduce customers' outage times and hence improve service reliability. As a result, various automation schemes have been developed and introduced in different countries and by different venders. The impacts of implementing a specific automation scheme on reliability indices of a given distribution system can be different from other available automation schemes. For this reason, when comparing the available automation schemes with each other or with the other reliability improvement measures, it is necessary to perform a course of reliability... 

In this paper, a model for the optimal placement of contingency-constrained phasor measurement units (PMUs) in electric power networks is presented. The conventional complete observability of power networks is first formulated and then, different contingency conditions in power networks including measurement losses and line outages are added to the main model. The communication constraints which would limit the maximum number of measurements associated with each installed PMU is considered as measurement limitations. The relevant formulations are also proposed to make the model more comprehensive. The IEEE standard test systems are examined for the applicability of proposed model. The... 

Solid State Drives (SSDs) have recently emerged as a high speed random access alternative to classical magnetic disks. To date, SSD designs have been largely based on multi-channel bus architecture that confronts serious scalability problems in high-end enterprise SSDs with dozens of flash memory chips and a gigabyte host interface. This forces the community to rapidly change the bus-based inter-flash standards to respond to ever increasing application demands. In this paper, we first give a deep look at how different flash parameters and SSD internal designs affect the actual performance and scalability of the conventional architecture. Our experiments show that SSD performance improvement... 

In this paper, a processor allocation mechanism for NoC-based chip multiprocessors is presented. Processor allocation is a well-known problem in parallel computer systems and aims to allocate the processing nodes of a multiprocessor to different tasks of an input application at run time. The proposed mechanism targets optimizing the on-chip communication power/latency and relies on two procedures: processor allocation and task migration. Allocation is done by a fast heuristic algorithm to allocate the free processors to the tasks of an incoming application when a new application begins execution. The task-migration algorithm is activated when some application completes execution and frees up... 

Topology of a mobile wireless sensor/ad hoc network is prone to link breakages due to node mobility which compels the periodic re-construction of the topology in so called ""hello"" intervals. The problem addressed in this paper is determining the maximum ""hello"" interval preserving the connectivity of a homogeneous topology with high probability. In order to study the optimum ""hello"" interval, statistical topology lifetime (STL) is formally defined as a value of ""hello"" interval that ensures statistical connectivity with a given threshold. Temporal properties of the topology are studied based on two phenomena; one concerning a connectivity phase transition with time and the other one... 

In recent years, flash memory solid state disks (SSDs) have shown a great potential to change storage infrastructure because of its advantages of high speed and high throughput random access. This promising storage, however, greatly suffers from performance loss because of frequent ''erase-before-write'' and ''garbage collection'' operations. Thus, novel circuit-level, architectural, and algorithmic techniques are currently explored to address these limitations. In parallel with others, current study investigates replacing shared buses in multi-channel architecture of SSDs with an interconnection network to achieve scalable, high throughput, and reliable SSD storage systems. Roughly... 

In this paper, we propose a reconfigurable NoC in which a customized topology for a given application can be implemented. In this NoC, the nodes are grouped into some clusters interconnected by a reconfigurable communication infrastructure. The nodes inside a cluster are connected by a fixed topology. From the traffic management perspective, this structure benefits from the interesting characteristics of the mesh topology (efficient handling of local traffic where each node communicates with its neighbors), while avoids its drawbacks (the lack of short paths between remotely located nodes). We then present a design flow that maps the frequently communicating tasks of a given application into... 

Modern SoC architectures use NoCs for high-speed inter-IP communication. For NoC architectures, high-performance efficient routing algorithms with low power consumption are essential for real-time applications. NoCs with mesh and torus interconnection topologies are now popular due to their simple structures. A torus NoC is very similar to the mesh NoC, but has rather smaller diameter. For a routing algorithm to be deadlock-free in a torus, at least two virtual channels per physical channel must be used to avoid cyclic channel dependencies due to the warp-around links; however, in a mesh network deadlock freedom can be insured using only one virtual channel. The employed number of virtual... 

In this study, the authors propose a processor allocation mechanism for run-time assignment of a set of communicating tasks of input applications onto the processing nodes of a chip multiprocessor, when the arrival order and execution lifetime of the input applications are not known a priori. This mechanism targets the on-chip communication and aims to reduce the power and latency of the network-on-chip employed as the communication infrastructure. In this work, the authors benefit from the advantages of non-contiguous processor allocation mechanisms, by allowing the tasks of the input application mapped onto disjoint regions (submeshes) and then virtually connecting them by bypassing the...