Sharif Digital Repository

Process variation has already emerged as a major concern in design of multi-processor system on chips (MPSoC). In recent years, there have been several attempts to bring variability awareness into the task scheduling process of embedded MPSoCs to improve performance yield. This study attempts to provide a comparative study of the current variation-aware design-time task and communication scheduling techniques that target embedded MPSoCs. To this end, the authors first use a sign-off variability modelling framework to accurately estimate the frequency distribution of MPSoC components. The task scheduling methods are then compared in terms of both the quality of the final solution and the... 

This paper proposes a reliability model for the electrical subassemblies of geared wind turbine systems with induction generators. The model is derived considering the failure of main subassemblies and their parameters are calculated. A productivity comparison is performed between the selected wind turbine systems including reliability issues. Two methods of modification for variable-speed wind turbines with Doubly Fed Induction Generators (DFIG) to improve their availability are finally suggested  

There are many approaches to fabricate nanoparticles reinforced aluminum matrix composites. However, uniform distribution of nanoparticle within aluminum matrix remains a difficult challenge. In this study, a novel method is used by taking the advantages from squeeze casting of semi-solid aluminum slurry combined with electromagnetic field to refine the microstructure of the primary Al and eutectic Si phase, plus to obtain uniform distribution nano alumina particles in the aluminum matrix. It is noted that electromagnetic field plays an important role in the formation of non-dendritic primary α-Al particles and a great microstructure refinement occurs as a consequence of the pressure... 

In the present study, regarding the theoretical and practical aspects of nanoparticle capture in liquid-state processing of aluminum composite, different volume fractions of TiB 2 and TiO 2 nanopowders were incorporated into aluminum alloy via stir casting method. Hardness and sliding wear test were carried out to evaluate the mechanical properties of composites. The effects of wear load and reinforcement content on wear rate and friction coefficient of composites were examined. Microstructural studied showed that particle distribution in A356- TiB 2 composites was more favorable than that of the A356- TiO 2 samples. Results showed that nanoparticles were partially captured by aluminum... 

The Mapping and Modeling Subcommittee of the US National Tsunami Hazard Mitigation Program convened a workshop in January 2017 to evaluate the present state of numerical models for the simulation of tsunamis generated by submarine or subaerial landslides. A range of benchmark tests were provided to participants, with three tests emphasized: (i) a laboratory submarine solid slide in a 2D horizontal tank, (ii) a laboratory submarine granular slide in a 1D flume, and (iii) a field case based on submarine slides which occurred in Port Valdez, AK during the 1964 Alaska earthquake. Nine landslide tsunami models configured with 21 different combinations of physical options were benchmarked,... 

The main focus of this study is to address the possibility of using molecular dynamics (MD) simulation, as a computational framework, coupled with experimental assays, to optimize composite structures of a particular electrospun scaffold. To this aim, first, MD simulations were performed to obtain an initial theoretical insight into the capability of heterogeneous surfaces for protein adsorption. The surfaces were composed of six different blends of PVA (polyvinyl alcohol) and PCL (polycaprolactone) with completely unlike hydrophobicity. Next, MTT assay was performed on the electrospun scaffolds made from the same percentages of polymers as in MD models to gain an understanding of the... 

Representational similarity analysis (RSA) summarizes activity patterns for a set of experimental conditions into a matrix composed of pairwise comparisons between activity patterns. Two examples of such matrices are the condition-by-condition inner product and correlation matrix. These representational matrices reside on the manifold of positive semidefinite matrices, called the Riemannian manifold. We hypothesize that representational similarities would be more accurately quantified by considering the underlying manifold of the representational matrices. Thus, we introduce the distance on the Riemannian manifold as a metric for comparing representations. Analyzing simulated and real fMRI... 

In this paper, we present a new adaptive contourlet-based steganography method that hides secret data in a specific or automatically selected cover image. Our proposed steganography method primarily decomposes the cover image by contourlet transform. Then, every bit of secret data is embedded by increasing or decreasing the value of one coefficient in a block of a contourlet subband. Contourlet coefficients are manipulated relative to their magnitudes to hide the secret data adaptively. In addition to proposing contourlet-based steganography method, this work investigates the effect of cover selection on steganography embedding and steganalysis results. We demonstrate, through the... 

The challenges of water resources sustainable development are enormous. Around the globe, the increasing use of water coupled with environmental deterioration calls for sustainable development of the limited water resources. As a significant part of the world's population still lacks access to safe water and adequate sanitation, and as global urbanization continues to increase, continuous, comprehensive, coordinated and cooperative water resources management is required for the sustainable future of urban areas. The objective of this study was to assess water resources sustainable development for selected urban areas around the world. Using centralized databases of international agencies for... 

Two-dimensional (2D) and three-dimensional (3D) numerical simulations of an external compression supersonic ramped inlet are presented for a free stream Mach number of 2. A comparison made between numerical results and experimental data showed that multi-block structured gird using standard k - " turbulence model gives acceptable results. The shape of present inlet diffuser was transformed gradually into a circular one to encompass the Aerodynamic Interface Plane (AIP). It was observed that the 3D simulation predicted a more accurate static pressure distribution during the length of supersonic inlet and total pressure distribution at the AIP in comparison with the 2D one. Further, a better... 

In this study, the enhanced trichloroethylene (TCE) degradation performance was investigated by polyvinyl alcohol coated calcium peroxide nanoparticles (PVA@nCP) as an oxidant in Fe(II)-based catalytic systems. The nanoscale iron sulfide (nFeS), having an average particle size of 115.4 nm, was synthesized in the laboratory and characterized by SEM, TEM, HR-TEM along with EDS elemental mapping, XRD, FTIR, ICP-OES, and XPS techniques. In only ferrous iron catalyzed system (PVA@nCP/Fe(II)), TCE degradation was recorded at 58.9% in 6 h. In comparison, this value was increased to 97.5% or 99.7% with the addition of citric acid (CA) or nFeS in PVA@nCP/Fe(II) system, respectively. A comparative... 

In this study, the enhanced trichloroethylene (TCE) degradation performance was investigated by polyvinyl alcohol coated calcium peroxide nanoparticles (PVA@nCP) as an oxidant in Fe(II)-based catalytic systems. The nanoscale iron sulfide (nFeS), having an average particle size of 115.4 nm, was synthesized in the laboratory and characterized by SEM, TEM, HR-TEM along with EDS elemental mapping, XRD, FTIR, ICP-OES, and XPS techniques. In only ferrous iron catalyzed system (PVA@nCP/Fe(II)), TCE degradation was recorded at 58.9% in 6 h. In comparison, this value was increased to 97.5% or 99.7% with the addition of citric acid (CA) or nFeS in PVA@nCP/Fe(II) system, respectively. A comparative... 

Controlling topographic features at all length scales is of great importance for the interaction of cells with tissue regenerative materials. We utilized an indirect three-dimensional printing method to fabricate polymeric scaffolds with pre-defined and controlled external and internal architecture that had an interconnected structure with macro- (400-500 μm) and micro- (∼25 μm) porosity. Polycaprolactone (PCL) was used as model system to study the kinetics of tissue growth within porous scaffolds. The surface of the scaffolds was decorated with TiO2 and bioactive glass (BG) nanoparticles to the better match to nanoarchitecture of extracellular matrix (ECM). Micrometric BG particles were... 

In this paper, a two-link flexible manipulator is considered. For a prescribed motion, Timoshenko and Euler-Bernoulli beam models are considered. Using the Galerkin method, nonlinear equations of motion are solved. The Runge-Kutta method is employed for the time response integration method. A comparative study is made between the Euler-Bernoulli and Timoshenko beam models, with and without foreshortening effects. It is demonstrated that for two-link manipulators, both theories provide good models, and the results for both theories are very similar for all ranges of slenderness ratio. The findings suggest that for two-link manipulators with relatively high slenderness ratios, there is a... 

The urine formation and excretion system have long been of interest for mathematicians and physiologists to elucidate the obscurities within the process happens in renal tissue. In this study, a novel three-dimensional approach is utilized for modeling the urine concentrating mechanism in rat renal outer medulla which is essentially focused on demonstrating the significance of tubule's architecture revealed in anatomic studies and physiological literature. Since nephrons and vasculatures work interdependently through a highly structured arrangement in outer medulla which is dominated by vascular bundles, a detailed functional unit is proposed based on this specific configuration.... 

The main aim of this work was to assess the ability of Bayesian multivariate adaptive regression splines (BMARS) and Bayesian radial basis function (BRBF) techniques for modelling the gas chromatographic retention indices of volatile components of Artemisia species. A diverse set of molecular descriptors was calculated and used as descriptor pool for modelling the retention indices. The ability of BMARS and BRBF techniques was explored for the selection of the most relevant descriptors and proper basis functions for modelling. The results revealed that BRBF technique is more reproducible than BMARS for modelling the retention indices and can be used as a method for variable selection and... 

Introduction: Some tinnitus subjects habituate to their tinnitus but some others do not and complain of its annoyance tremendously. Normal sensory memory and change detection processes are needed for detecting the tinnitus signal as a prediction error and habituation to tinnitus. The purpose of this study was to compare auditory mismatch negativity as the index of sensory memory and change detection among the studied groups to search for the factors involving in the perception of tinnitus and preventing habituation in decompensated tinnitus subjects. Methods: Electroencephalography was recorded from scalp electrodes in compensated tinnitus, decompensated tinnitus, and no tinnitus control... 

Most of the Iranian oil reservoirs are naturally fractured. Reinfiltration is a key proceess which controls oil flow from the upper to the lower matrix block. However, theoretical modeling of fracture aperture as well as fracture dip angle effects on flow rate of drained oil during reinfilteration process remains a topic of debate in the literature. Moreover, there is no reported experience in the literature that compared the oil velocity predicted by traveling oil bridges and continuum film flow approaches. In this work reinfiltration process is modeled through two different approaches: discrete traveling liquid elements and continuum film flow along inclined fractures. For a case study... 

Heat pipes are useful devices in heat transfer and particularly, in cooling systems. Given the high demand for cooling systems in various applications, an improvement in the performance of heat pipes has gained much attraction in recent years. In this study, the effects of utilizing working fluids with different thermal properties on the performance of pulsating heat pipes (PHP) are experimentally studied. Hence, nano-encapsulated phase change material (NPCM), reduced graphene oxide nanosheets, and their mixture, as a novel hybrid nanofluid, are prepared and dispersed in water as a working fluid. NPCM at 3 concentrations of 5, 10, and 20 g/L, as well as nanosheets at three concentrations of...