Sharif Digital Repository

Thermal management of electronic devices is presently a serious concern. This article investigates the thermal performance of a five-turn open-loop pulsating heat pipe in both start-up and steady thermal conditions. The effects of working fluid, namely water and ferrofluid, heat input, charging ratio, ferrofluid concentration, orientation, as well as application of magnetic field, are explored. Experimental results show that using ferrofluid enhances the thermal performance in comparison with the case of distilled water under certain conditions. In addition, applying a magnetic field on the open-loop pulsating heat pipe charged with ferrofluid improves its thermal performance. Charging... 

Using non-equilibrium molecular dynamics simulations, we investigate the effects of nanotube size, mean flow velocity, ion concentration and temperature of an electrolyte water solution on shearing stress and nominal viscosity. It is shown that the distributed electric field arising from the electrolyte water solution has significant influences on fluid properties. Also, the temperature of the solution, which causes thermal movement, affects nanofluidic transport in nanoenvironments. The nominal viscosity and shearing stress increases as the tube diameter increases. When the temperature of solution increases or ion concentration decreases, the shearing stress and nominal viscosity increase.... 

The present work investigates the thermal performance of a five turn Open Loop Pulsating Heat Pipe (OLPHP). The effects of working fluid namely water and ferrofluid, heat input, ferrofluid concentration, charging ratio, and orientation will be considered. Experimental results show that using ferrofluids can enhance the thermal performance in comparison with the case of distilled water. In addition, applying a magnetic field on the OLPHP charged with ferrofluid reduces its thermal resistance. Variation of the ferrofluid concentration results in different thermal performance of the OLPHP. Best charging ratio for the distilled water and ferrofluid without magnetic field is 60 % in most of the... 

A headspace adsorptive microextraction technique was developed using a novel polyaniline-nylon-6 (PANI-N6) nanofiber sheet, fabricated by electrospinning. The homogeneity and the porosity of the prepared PANI-N6 sheet were studied using the scanning electron microscopy (SEM) and nanofibers diameters were found to be around 200nm. The novel nanofiber sheet was examined as an extracting medium to isolate some selected chlorobenzenes (CBs), as model compounds, from aquatic media. The extracted analytes were desorbed using μL-amounts of solvent and eventually an aliquot of extractant was injected into gas chromatography-mass spectrometry (GC-MS). Various parameters affecting the extraction and... 

This work is concerned with the experimental investigation of mass transfer, which occurs during diffusion of hydrocarbon solvents in heavy oil based on constant and concentration-dependent diffusion coefficient. Here, a series of free fall diffusion experiments have been conducted in sealed test tubes at fixed temperatures. Pentane, hexane, and octane were used as solvents and were placed on heavy oil in tubes. The diffusivity of heavy oil into solvents was monitored by a digital camera. The image analysis technique was applied to extract concentration profiles in diffusion zones of solvents by means of calibration curves. Fick's second law was used to obtain both constant and... 

There are many fundamental problems with the injection of nano-zero-valent iron (NZVI) particles to create permeable reactive barrier (PRB) treatment zone. Among them the loss of medium porosity or pore blocking over time can be considered which leads to reduction of permeability and bypass of the flow and contaminant plume up-gradient of the PRB. Present study provides a solution for such problems by confining the target zone for injection to the gate in a funnel-and-gate configuration. A laboratory-scale experimental setup is used in this work. In the designed PRB gate, no additional material from porous media exists. NZVI (d 50 = 52 ± 5 nm) particles are synthesized in water mixed with... 

The present study has been conducted to investigate the effect of inlet flow regimes on vertical velocity and concentration profiles of the turbidity current. Experiments carried out on small scale channel and Kaolin with a density of 2.65 kg/m3 and a mean particle diameter of 4.5 μm, was used to generate the currents. Velocities were obtained at a rate of 10 Hz using an acoustic Doppler velocimeter. Using the siphon sampling approach, the acoustic backscattering intensity was calibrated and concentration was determined using a backscattering analysis. Results showed that the ratio of maximum velocity height to the height of the current was around 0.4-0.5 in sub- and super-critical regimes.... 

In this work the application of a modified surface nano zero valent iron (NZVI) as bimetallic Fe/Cu particles to remove high concentration of NO3--N through packed sand column has been studied. Dispersed nano-Fe/Cu particles has been synthesized in water mixed ethanol solvent system (1:4v/v) and described by XRD pattern, TEM and SEM images and BET analyze. Batch experiments have been conducted to investigate the effect of percentage coating of Fe0 by Cu on the nitrate removal. Research on packed sand column (120cm length, 6.5cm inner diameter) has been done under conditions of Nano-Fe/Cu concentration (2, 5, and 8gl-1 of solution), high initial NO3--N concentration (100, 200, and 300mgl-1)... 

Continuing an ongoing study, molecular dynamics (MD) simulations were performed to investigate the effects of methanol concentration on Nafion morphology, such as the size of solvent cluster, solvent location, and polymer structure via the sandwich model. Our survey shows that high methanol concentrations resulted in increment of solvent cluster size in Nafion membrane. The sulfonic acid clusters also befall much in order as subsequent layers of such ionic clusters are formed. The number of neighbouring hydronium ions around a sulfur atom is independent of methanol concentration, but the first shell of hydronium and water around sulfonic acid clusters is broader. Although methanol would... 

In this study, central composite design (CCD) at five levels (-1.63, -1, 0, +1, +1.63) combined with response surface methodology (RSM) have been applied to optimise methanol carbonylation using a ruthenium-promoted iridium catalyst in a homogenous phase. The effect of seven process variables, including temperature, pressure, iridium, ruthenium, methyl iodide, methyl acetate and water concentrations, as well as their binary interactions, were modelled. The determined R 2 values greater than 0.9 for the rate and methane formation data confirmed that the quadratic equation properly fitted the obtained experimental data. The optimum conditions for maximum rate and minimum methane formation were... 

In this work, simultaneous inferential control of particle size distribution (PSD) and molecular weight distribution (MWD) in a semi-batch emulsion polymerization reactor of styrene has been addressed. Using a comprehensive dynamic model for PSD and MWD predictions and performing a sensitivity analysis, it has been revealed that free surfactant and chain transfer agent (CTA) concentrations in the reactor are the most suitable candidates for inferential control of PSD and MWD, respectively. To control concentrations of these species in the reactor, their inlet feed flow rates are used as manipulated variables. It is assumed that the concentration of CTA is measured infrequently and therefore... 

The formation of multi-walled carbon nanotubes (MWCNTs) during arc discharge in aqueous solutions of Fe2(SO4)3 and FeCl3 was studied. The concentration of iron ions changed from zero (deionized water) to 0.25 M and the cathodic products were examined by transmission electron microscopy, Raman spectrometry, and thermal gravimetric analysis. The experimental results showed that the crystallinity of MWCNTs is improved by increasing the concentration of iron ions. Nevertheless, the process yield and overall quality of the produced CNTs were significantly affected by iron concentration in the aqueous solution. This observation suggested that there should be an optimum iron concentration at which... 

Effects of initiator and surfactant concentrations and temperature on styrene conversion and polymer particle size distribution (PSD) in a batch emulsion polymerization are investigated through simulation and experimental studies. The detailed model based on population balance (zero-one model), accounting for nucleation, growth and coagulation phenomena has been used for prediction of particle size distribution. In checking the effect of initiator concentration on final PSD, it was noticed that when critical micelle concentration (CMC) is kept constant, the model cannot predict PSD very well. Thus, a correlation for calculating critical micelle concentration has been proposed and... 

The flux behavior during the industrial cross-flow ultrafiltration of apple juice in a batch process was modeled using a combination of the fouling and concentration polarization models. It was observed that the major flux reduction was at the beginning and at the end of operation due to fouling and increasing solute concentration in the feed tank, respectively. The fouling phenomenon was analyzed by classical and empirical models and it was shown that the empirical one has the best correlation within less than 0.3% error for each experiment. The most significant advantage of this model is its ability to predict a steady flux, while other models predict zero flux at infinite time, which is... 

Enzymatic decolorization of the monoazo dye, acid orange 7 (AO7) by the fungal peroxidase from Coprinus cinereus NBRC 30628 is a complex system, which is greatly affected by temperature, pH, enzyme activity and the concentrations of H2O2 and dye concentration. The study of these factors and investigating the combined interactions between them by applying one-factor-at-a-time (OFAT) method and two other statistical methods including 2-factorial method and response surface methodology (RSM) were aimed in this work. Through OFAT analysis the optimized conditions were a temperature of 25 °C, pH 9.0 with H2O2 concentration of about 3.9 mM and AO7 concentration of 40 mg/l. A complete... 

In this research, the effect of applied voltage and electrolyte concentration on structure, chemical composition, optical properties, and especially photo-catalytic activity of the TiO2 layers containing micro/nano-sized pores are discussed. TiO2 layers were synthesized by micro arc oxidation (MAO) process using different electrolyte concentrations and applied voltages. Surface structure of the layers was studied by scanning electron microscope (SEM); furthermore, energy dispersive spectrophotometry (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) techniques were employed to determine phase structure and chemical composition of the layers. Photo-activity of the... 

Rheological behavior of agglomerated silver nanoparticles (~ 40 nm) suspended in diethylene glycol over a wide range of volumetric solids concentrations (φ{symbol} = 0.11-4.38%) was studied. The nanoparticle suspensions generally exhibited a yield pseudoplastic behavior. Bingham plastic, Herschel-Bulkley and Casson models were used to evaluate the shear stress-shear rate dependency. Analyzing the effect of silver concentrations on the yield stress and viscosity of the suspensions followed an exponential form, revealing an increase in the degree of interparticle interactions with increasing solid concentrations. Fractal dimension (Df) was estimated from the suspension yield stress and... 

In this paper, we consider termination of probabilistic programs with real-valued variables. The questions concerned are: (a) qualitative ones that ask (i) whether the program terminates with probability 1 (almost-sure termination) and (ii) whether the expected termination time is finite (finite termination); (b) quantitative ones that ask (i) to approximate the expected termination time (expectation problem) and (ii) to compute a bound B such that the probability to terminate after B steps decreases exponentially (concentration problem). To solve these questions, we utilize the notion of ranking supermartingales which is a powerful approach for proving termination of probabilistic programs.... 

It has been attempted to gain a new viewpoint in transient cell modeling of vanadium redox flow battery. This has been achieved by considering electrochemical relations along with conceptual electrical circuit of this kind of battery. The redox flow battery is one of the best rechargeable batteries because of its capability to average loads and output power sources. A model of transient behavior is presented in this paper. The transient features are considered as the most remarkable characteristics of the battery. The chemical reactions, fluid flow, and electrical circuit of the structure govern the dynamics. The transient behavior of the redox flow battery based on chemical reactions is... 

The major objectives of this study are to analytically and experimentally determine the residual resistance factor in the fractured medium based on the polymer solution properties and operational conditions. The parameters considered in this study are the polymer concentration, power law constitutive equation parameter, and salt concentration, sulfonation content of polymer, temperature, and molecular weight of the water soluble polymers which are used in polymer flooding for enhanced oil recovery. The results indicated that residual resistance factor in fractured medium is dependent on the coil overlap parameter and power law equation parameter of polymer. The coil overlap parameter is a...