Sharif Digital Repository

Steel structures are one of the most common structures in the world. One of the main parts of these structures is the connections, which are divided into three main categories of fixed, semi-rigid and joints, according to
the different criteria provided in the guidelines and codes. Perhaps the main challenge facing civil engineers has been designing efficient connections against lateral loads (seismic loads, wind loads). This issue has received more and more attention from designers due to the poor performance of the fasteners against lateral loads. Investigating and evaluating semi-rigid connections as one of the main part of steel structures against various loads, especially lateral... 

Khorjini connection is a type of connection in steel frames, in which the beam remains continuous at the intersection with column. In its ordinary form, this beam is connected to the face of column section using upper and lower angles. This type of connection is frequently used in construction of steel frames in Iran due to economic advantages and ease of fabrication. However since it is rarely used in other countries, its behavior and method of design is not described in international references and standards. The failure of the connections is a dominant type of seismic fraction in a building (The main reason of structural failures in Manjil and Roudbar earthquake – 1990). Contrary to the... 

The flexibility of beam to column connections and its effect on behavior of steel structures is one of the most important problems, which is interesting to engineers and scientists for more than 80 years. Hence many studies conducted on this topic to clarify the behavior of this type of connection. In this work, it is tried to study the behavior of double plate connections, which are welded to the beam web by finite element modeling and mathematical method. A novelty of this thesis is some top trough plate which has been implemented to column under beam flange. Based on finding of this thesis few recommendation can be made related to usage of top trough plate. In brief reduction of... 

Double angle connections, which are welded to the beam web and bolted to the column flange, are usually used to make hinged or semi-hinged connections. Several models are presented in this study whose geometrical properties are different. The finite element software package is used to develop the finite element analysis of the connections. An analytical method is presented that can be used to determine the behavior and deformation for this type of connection. The correctness of Moment-rotation curves of finite element analysis for each connection has been ascertained by comparison, using analytical technique; and a very good agreement has been obtained  

This study investigates the cyclic experimental behavior of damaged exterior reinforced concrete beam–column joint specimens retrofitted with the proposed technique using steel elements called steel prop and curb. The technique is usable for local and global strengthening of reinforced concrete frames. Four half-scale RC joints were tested under the cyclic loading; two control specimens with the different beam heights were loaded up to their ultimate strength and this was followed by retrofitting of these damaged specimens as new specimens and tested again under the same loading system. This study indicate the importance of some parameters such as friction , jacket place , thickness of plate... 

Composite Reinforced Concrete-Steel (RCS) frames which have reinforced concrete columns and steel beams attracted a lot of attention in recent years. They take advantage from the benefits of both reinforced concrete and steel frames thorough using the optimum combination of concrete and steel structural elements. In this research six structures including three 3-story, and three 6-story buildings are designed in a region with very high seismicity risk. These structures include composite RCS moment frames, special steel moment frames, and reinforced concrete special moment frames. RCS moment frames which are designed they not only have reinforced concrete columns similar to reinforced... 

Today steel tubular systems are used more than before, especially in recent years. A difficulty with this type of systems is making beam to column connections using bolts due to no access to holes of bolts from the inside of tube or hollow circular column. Reverse channel connection is devised and introduced to prevail this problem. Access to holes in this connection is from the inside of channel. In this connection, the web of the channel is connected to steel beam using bolts and the two legs of channel is welded to face of tube column.
This type of connection does include some innovations; not too many researchers work on different versions of this connection. This thesis provides an... 

The study of bolted moment end-plate connections, both beam to column and beam to beam connections, is quite general and standard nowadays. Buildings which utilize such connections are widely being used and the reorganization of their significant benefits is growing. The research work reported in this thesis presents the results of several parametric analyses to determine the moment–rotation curve of bolted moment end-plate connections utilizing Rectangular Hollow Sections (RHS) and two rows of bolts using Finite Element Modeling (FEM). Previous experimental studies have focused on the moment-rotation relationship under pure bending. This project particularly involves further numerical... 

The main goal of this research is to evaluate the vertical and slant bolted endplate connections performance in steel moment frame structures under thermal effect in elastic range for two cases. In the first case, frictionless and in the second case slips with friction are considered. By finite element analysis, the connections are simulated to study the performance and verify simplified models of vertical and slant bolted endplate connections due to increase in temperature. The results of a vertical bolted endplate connection and a slant bolted endplate connection due to increase in temperature are compared the effect of slope of end plate reduction of axial force on beam is investigated.... 

Using mixed building system of structural steel and reinforced concrete improves the resistance of the structure in comparison with using either material alone. Coupled shear walls is one of these new systems. Coupled shear walls by definition is a series of walls coupled by beams as a central core structure with opening to accommodate doors, elevator wells, windows and corridors. Coupled shear walls can provide an efficient structural system to resist horizontal force due to axial and seismic loads. One type of coupled beams is Steel Coupling Beams (SCB) which consists of steel beams and reinforced concrete shear walls which represents a cost and time-effective type of construction. Some... 

The fundamental goal of communication networks is to transfer messages across the network between the nodes. Often, maximizing the information flow which is limited by connectivity of the network could be interesting. The concept of connectivity is divided into edge and vertex connectivity. If our focus were on the vertex-connectivity, connected dominating sets (CDS) could be a valuable tool. Obtaining (fractionally) vertex-disjoint connected dominating sets which are called fractional CDS packing presents a backbone to get an information flow matching the size of connectivity. In this thesis, we will present a distributed algorithm that is given a communication network with n nodes and... 

With the increase of electric energy demand, one of the human concerns is to create the infrastructure for the production and transmission of energy in order to meet this need. Since the network must have the ability to supply the load during the peak load times, practically during the non-peak load times, many production capacities remain unused and their productivity decreases. One of the ways to reduce this problem due to the increase in penetration of batteries in the network can be the participation of battery banks to inject power into the network during peak load times. The goal of this project is to develop an 8 kilowatt-hour battery bank system that can inject 2 kilowatts of power... 

Sustainable development of the energy system requires policies for ensuring reliable access to energy services with the lowest economic and environmental costs. Despite owning abundant reserves of fossil resources, Iran has witnessed an imbalance in the supply and demand of energy carriers, especially gas, gasoline, and electricity, over the past years. Within a comprehensive and detailed research, the optimal pattern of utilizing non-renewable energy resources along with renewables is evaluated in the context of sustainable energy development. The developed tool based on the integrated assessment approach can be used as a scientific analytic measure for the implementation of the desired... 

In order to ensure the safety of the plants, a set of commissioning tests based on international standards for nuclear power plants is carried out before operation. In this research, one of the Bushehr power plant commissioning tests, the loop connection primary circuit cooling pump test, was simulated using the RELAP5 code. In this test, the effects of loop connection primary circuit pumps on the thermohydraulic parameters and the eneterance of test-related systems was evaluated. After simulating the systems related to the test and extracting the results of the stable state, were evaluated the transient results was obtained with the experimental results of the test of loop connection the... 

Renewable energy sources have significantly used in recent years and the associated technologies have been widely developed. Grid connection of most renewable technologies, such as photovoltaic and wind turbine, is accomplished using power electronic converters. Control of injected active and reactive power as well as current and frequency control of is, so, implemented through the power converter. Inverter is among the equipments widely used for grid connection The purpose of this project was to design and develop an inverter for grid connection of renewable generation technologies for laboratory use. The inverter is aimed to control both injected active and reactive power. A full-bridge... 

In this research, the effect of the changes of the factors affecting the stability and vibrations of the rotating shaft with the middle universal joint has been investigated. Using the energy method, the rotor motion equations for two five-degree-of-freedom Jefkat rotors have been obtained. By considering the effect of system vibrations on the angle between the rotors and using the existing constraint relations at the connection point of the rotors and inserting them into the equations, finally the equation of motion of the investigated system has been obtained as seven degrees of freedom. Due to the variable speed of the output shaft, the coefficients of the degrees of freedom are dependent... 

In the present study an air supply system of a connected-pipe ramjet test facility for liquid fuel ramjet engine in theoretical and numerical base designed and optimized that the purpose is for performance test of a ramjet engine combustor in flight condition. The flight condition gained from previous assessment that is 1.5 kg air in 10 bars and 550 K. Air supply subsystems consist of air tanks, compressors, valves, regulators, preheater, and fuel and oxygen systems that are designed in a preliminary process and then valves, orifices, and fuel and oxygen systems optimized by HYSYS program. In the last step preheater that is a gas turbine combustor investigated and possible changes made by... 

In the present study, design and manufacturing of a connected pipe liquid fuel ramjet test platform is implemented for performance investigation of a research liquid fuel ramjet burner in the thermodynamic flight conditions. Design and manufacturing of platform systems include: the hot air supply system, the liquid fuel system and the square cross-sectional combustion chamber with the v-gutter shape flame holder. In order to determine the performance range of subsystems, calibration process has been carried out. Calibration process of the hot air supply system includes: determining of the burner inlet velocity and temperature. Also, calibration of the liquid fuel system includes: determining... 

The Concept of causation plays a major role in Hume’s philosophy and as yet has been debated between philosophers. This Thesis aims to Consider the main part of Hume’s view about Causation, but it also Ventutes into more recent approaches in this subject. In first chapter, we attend to Consider The project of Hume named "Seience of man" and The associative mechanism of causation is expressed. In Second chapter, We turn to three famous interpretations of Hume’s view and the meaning of two definitions of Causation is discussed. In third chapter, we try to analyse the real nature of necessary Connection. According to fourth chapter, we again attend to three interpretations and recognize the... 

Over the past few years, various studies have demonstrated that the complex networks can be used to model the structure and functions of human brain. Some of these studies indi- cated that diseases such as Alzheimer, Epilepsy, and Schizophrenia can cause changes in this network. The main idea behind the methods proposed to analyze human brain’s behav- ior, is to identify regions of the brain with specific tasks. Recent studies show that multiple regions of human brain are involved in complex activities, so it’s important to detect their interactions. Using functional high resolution multichannel neurophysiological signals, like electroencephalographic (EEG) and magnetoencephalographic...