Sharif Digital Repository

There are a vast number of cloud service providers, which offer virtual machines (VMs) with different configurations. From the companies perspective, an appropriate selection of VMs is an important issue, as the proper service selection leads to improved productivity, higher efficiency, and lower cost. An effective service selection cannot be done without a systematic approach due to the modularity of requests, the conflicts between requirements, and the impact of network parameters. In this paper, we introduce an innovative framework, called PCA, to solve service selection problem in the hybrid environment of peer-assisted, public, and private clouds. PCA detects the conflicts between the... 

Recent development in memory technologies has introduced Spin-Transfer Torque Magnetic RAM (STT-MRAM) as the most promising replacement for SRAMs in on-chip cache memories. Besides its lower leakage power, higher density, immunity to radiation-induced particles, and non-volatility, an unintentional bit flip during read operation, referred to as read disturbance error, is a severe reliability challenge in STT-MRAM caches. One major source of read disturbance error in STT-MRAM caches is simultaneous accesses to all tags for parallel comparison operation in a cache set, which has not been addressed in previous work. This paper first demonstrates that high read accesses to tag arrays extremely... 

This paper introduces a cyber-physical system for building automation and control that is developed based on a distributed model predictive control. The implemented distributed method significantly reduces computation overhead with respect to the centralized methods. However, continuous data transfer between subsystems, which are often far from each other, is required when using this method. Information transmission between subsystems is very often subject to the limitations of transmission bandwidth and/or short communication range resulting in significant communication overhead. This causes significant time latency between making measurements and applying control commands, which adversely... 

The use of solar concentrators can be an alternative for initial cost reduction in the PV systems. However, they suffer from high cell temperature that can be overcome by different active or passive cooling approaches. Spectral splitting and the elimination of high-energy solar photons are effective solutions for cell temperature reduction. In this study, we developed a Polymethyl methacrylate Spectral Splitting Fresnel Lens (SSFL) for linear concentration using a new design, which directs the desired portion of the spectrum towards the cell and diffracts the rest to eliminate the use of beam splitters or nanofluids in the spectral splitting system. Different SSFLs were considered for... 

Network function virtualization (NFV) and software-defined networking (SDN) are two promising technologies to enable 5G and 6G services and achieve cost reduction, network scalability, and deployment flexibility. However, migration to full SDN/NFV networks in order to serve these services is a time-consuming process and costly for mobile operators. This paper focuses on energy efficiency during the transition of mobile core networks (MCN) to full SDN/NFV networks and explores how energy efficiency can be addressed during such migration. We propose a general system model containing a combination of legacy nodes and links, in addition to newly introduced NFV and SDN nodes. We refer to this... 

All costs within the life cycle of a building are known as its life cycle cost (LCC). In the design process of a building, the use of a lower initial cost index to select an option among others with similar performance may not lead to an economically optimal alternative during the life cycle. Hence, today, building designers and investors require a tool to estimate life cycle cost at the conceptual design stage to select an economically efficient option. Resilient solutions generally lead to a higher level of complexity and upfront costs and carry additional embodied environmental impact as well. This study aims to support the design of resilient buildings using a sound LCC methodology in... 

Finite element analysis of huge and/or complicated structures often requires long times and large computational expenses. Superelements are huge elements that exploit the deformation theory of a specific problem to provide the capability of discretizing the problem with minimum number of elements. They are employed to reduce the computational cost while retaining the accuracy of results in FEM analysis of engineering problems. In this research, a new shell superelement is presented to study linear/nonlinear static and free vibration analysis of spherical structures with partial or full spherical geometries that exist in many industrial applications. Furthermore, this study investigates the... 

An energy management system (EMS) was proposed for a campus microgrid (μG) with the incorporation of renewable energy resources to reduce the operational expenses and costs. Many uncertainties have created problems for microgrids that limit the generation of photovoltaics, causing an upsurge in the energy market prices, where regulating the voltage or frequency is a challenging task among several microgrid systems, and in the present era, it is an extremely important research area. This type of difficulty may be mitigated in the distribution system by utilizing the optimal demand response (DR) planning strategy and a distributed generator (DG). The goal of this article was to present a... 

The sustainable design of the waste-management system is of crucial importance for cities like Tehran, capital of Iran. Tehran’s municipal solid-waste management has adopted modern practices and technologies very slowly. This study proposes the optimum pathway to reach maximum environmental benefits as well as the most cost-effective technologies according to the financial limits. The hybrid life cycle assessment (LCA)–emergy approach is applied to utilize the life cycle emissions as an inventory database to estimate the ecosystem services provided by the natural ecosystem to dilute the emissions and compensate raw material consumption. Among organic waste-treatment options, composting is... 

Using zero liquid discharge systems is one of the efficient methods to reduce the negative environmental impact of the brines of the desalination systems and also to recycle the industrial wastewaters for reuse. Due to the simple fabrication process, low maintenance cost, intensive to inlet water quality, and the ability to use renewable and low-grade-heat, modified humidification-dehumidification systems may be a proper choice for the zero liquid discharge applications. Thus, in the present study, the energy, exergy, exergoeconomic, and exergoenvironmental assessment of three advanced brine recycle humidification-dehumidification systems for zero liquid discharge operation are... 

Supplying sustainable energy is of a critical prominence nowadays. A main outcome of the galloping development in energy generation technologies is the ability to integrate multi-carrier energy systems that facilitates meeting the fast growth of energy demand. Energy hub is one of the main infrastructures making the incorporation of multi-carrier systems smoother. In this paper, the optimal scheduling problem of an energy hub structure equipped with combined heat and power, boiler, power-to-gas storage, thermal energy storage and electrical energy storage in order to supply power, heat and gas demands is presented. Power to gas is regarded as a new technology that creates a connection... 

Hybrid Multi-Level Cache Architectures (HCAs) are promising solutions for the growing need of high-performance and cost-efficient data storage systems. HCAs employ a high endurable memory as the first-level cache and a Solid-State Drive (SSD) as the second-level cache. Spin-Transfer Torque Magnetic RAM (STT-MRAM) is one of the most promising candidates for the first-level cache of HCAs because of its high endurance and DRAM-comparable performance along with non-volatility. However, STT-MRAM faces with three major reliability challenges named Read Disturbance, Write Failure, and Retention Failure. To provide a reliable HCA, the reliability challenges of STT-MRAM should be carefully addressed.... 

This article presents a mixed-integer linear stochastic model for the optimal expansion planning of electricity distribution networks and distributed generation (DG) units. In the proposed framework, autonomous DG units are aggregated and modeled using the well-known energy hub concept. In this model, the uncertainties of heat and electricity demand as well as renewable generation are represented using various scenarios. Although this is a standard technique to capture the uncertainties, it drastically increases the dimensions of this optimization problem and makes it practically intractable. In order to address this issue, a novel iterative method is developed in this article to enhance the... 

Finite element analysis of huge and/or complicated structures often requires long times and large computational expenses. Superelements are huge elements that exploit the deformation theory of a specific problem to provide the capability of discretizing the problem with minimum number of elements. They are employed to reduce the computational cost while retaining the accuracy of results in FEM analysis of engineering problems. In this research, a new shell superelement is presented to study linear/nonlinear static and free vibration analysis of spherical structures with partial or full spherical geometries that exist in many industrial applications. Furthermore, this study investigates the... 

Sectionalizing switches are the main components of any restoration scheme in fault situations of power distribution systems. In this paper, customer outage costs reduction is aimed through the optimal simultaneous placement of manual and remote-controlled switches (RCSs). Network reconfigurations are constrained such that operational considerations like statutory ranges for voltage levels, lines' thermal capacities, and necessity of radial configuration be conserved. Total cost reduction is mathematically modeled in a mixed-integer linear programming (MILP) model that makes the global optimal solution accessible. The validity of the proposed model is evaluated on the IEEE 33-bus network. In... 

Electric Vehicles (EVs) will be used rampantly in future transportation system. Although the uncontrolled charging of these EVs will be threatening for the stability of the grid, a compatible energy trading policy may provide beneficial services to the grid as well as preserving the sustainability of the system. In this paper, by taking advantage of block rate tariff, a wholesale pricing policy is introduced. A multi-objective approach is utilized to address the cost reduction and load leveling services concurrently. Due to the high computational complexity of a centralized problem, a game theoretic approach is exerted in order to design decentralized controllers for EVs. Moreover, an MPC... 

Spin-Transfer Torque Random Access Memories (STT-RAMs) are a promising alternative to SRAMs in on-chip caches. STT-RAMs face with a high error rate in write operations due to stochastic switching. To alleviate this problem, Error-Correcting Codes (ECCs) are commonly used, which results in a significant area and energy consumption overhead. This paper proposes an efficient technique, so-called Adaptive Way Allocation for Reconfigurable ECCs (AWARE), to correct write errors in STT-RAM caches. AWARE exploits the asymmetric error rate in cell switching directions, which leads to data-dependent write error rates, to reduce the ECC overheads without compromising the reliability of the cache. To... 

This paper finds near equilibrium prices for electricity markets with non-convexities due to binary variables, in order to reduce the market participants’ opportunity costs, such as generators’ unrecovered costs. The opportunity cost is defined as the difference between the profit when the instructions of the market operator are followed and when the market participants can freely make their own decisions based on the market prices. We use the minimum complementarity approximation to the minimum total opportunity cost model, from previous research, with tests on a much more realistic unit commitment model than in previous research, including features such as reserve requirements, ramping... 

In this paper, a two-stage charging management framework is proposed to exploit the potential flexibility of Electric Vehicles (EVs). The aim is to reduce drastic variations in distribution system net load caused by integration of intermittent renewable distributed generation (DG) units. In the first stage, a home-based charging method is formulated in which the desired charging schedule of EVs is obtained by minimizing the cost of energy taking into account owners' preferences. The attained charging schedules are then announced to EVs Coordinator Agent (ECA) which, as the second stage, applies an LP optimization to reduce the cost of ramp provision. Moreover, an incentive scheme is... 

Demand response (DR) and flexible AC transmission system (FACTS) devices can be effectively used for congestion management in power transmission systems. However, demand response program (DRP) implementation can itself affect the optimum location of FACTS devices, which is one of the main issues in power system planning. This paper investigates the impact of DRPs on unified power flow controller (UPFC) placement. The harmony search algorithm is employed to determine the optimum locations and parameter setting of UPFC in a long-term framework. The optimization problem is solved with different objectives including generation and congestion cost reduction, as well as loss reduction. In this...