Sharif Digital Repository

In this study, the effect of carboxyl-terminated butadiene-acrylonitrile liquid rubber on fracture toughness of glass-reinforced epoxy composites has been investigated. Fracture toughness tests were conducted in modes I, II and different mixed mode ratios. The data obtained from these tests have been analyzed by using different methods. Results indicated that interlaminar fracture toughness of composite specimens improved considerably through addition of carboxyl-terminated butadiene-acrylonitrile in modes I, II and mixed mode. Interlaminar fracture surfaces of the specimens were also characterized by field emission scanning electron microscope  

Researchers have examined different approaches to improve damage tolerance of discontinuously reinforced aluminum (DRA). In this study, three-layer DRA laminates containing two exterior layers of Al6061-15 vol.% SiCp and an interlayer of Al1050 were fabricated by hot roll bonding. Interfacial adhesion between the layers was controlled by means of rolling stain. The results of shear test revealed that, the bonding strength of laminates was influenced by number of rolling passes. Considering this effect, the role of interfacial bonding on the toughness of laminates was studied under three-point bending in the crack divider orientation. The quasi-static toughness of the laminates was greater... 

Delamination is a major problem in drilling of fiber-reinforced composite materials. Thrust force is an important factor leading to propagation of delamination during drilling process. One of effective methods to reduce machining forces is application of ultrasonic vibrations. In this study ultrasonic assisted drilling is applied to reduce thrust force in drilling of GFRP laminates. In order to conduct experiments a setup is designed and fabricated to apply both vibrations and rotation to drill bits. Using Taguchi method, a set of experiments is conducted with feed rate, spindle speed, and ultrasonic vibration amplitude as control factors. The results show that applying ultrasonic vibration... 

The dynamic response analysis of a delaminated composite beam with a general lay-up traversed under an arbitrary moving/non-moving force is presented. By employing the energy method and introducing a new finite element, the global mass and stiffness matrices for a Laminated Composite Beam (LCB) of Timoshenko type are derived in which the material couplings (bending-tension, bending-twist, and tension-twist couplings) with the Poisson's effect are considered. In deriving the governing equation the non-penetration condition is imposed by employing the method of Lagrange multipliers. Out of a self-developed finite element program, the natural frequencies and time response of such LCB are... 

A closed form solution is presented in this paper to study the dynamics of a composite beam with a single delamination under the action of a moving constant force. The delaminated beam is divided into four interconnected beams using the delamination limits as their boundaries. Governing motion equations are derived in which the differential stretching and the bending-extension coupling are considered. The method of modal analysis is adopted to derive analytically the dynamic response of each beam. The obtained results for the free vibrations of delaminated beam are verified against reported similar results in the literature. Moreover, the maximum dynamic response of such a beam is compared... 

A composite beam with single delamination traveled by a constant amplitude moving force is modeled accounting for the Poisson's effect, shear deformation and rotary inertia. The mechanical behavior between the delaminated surfaces is modeled using a piecewise-linear spring foundation. The governing differential equations of motion for such system are derived. Primarily, eigen-solution technique is used to obtain the natural frequencies and their corresponding mode shapes of such beam. Then, the Ritz method is employed to derive the dynamic response of the beam due to the moving force. The obtained results for the free and forced vibrations of beams are verified against reported similar... 

This paper presents the dynamic response of a delaminated composite beam under the action of a moving oscillating mass. In this analysis the Poisson's effect is considered for the first time. Moreover, the effects of rotary inertia and shear deformation are incorporated. In our modeling linear springs are used between delaminated surfaces to simulate the dynamic interaction between sub-beams. To solve the governing differential equations of motion using modal expansion series, eigen-solution technique is used to obtain the natural frequencies and their corresponding mode shapes necessary for forced vibration analysis. The obtained results for the free and forced vibrations of beams are... 

A rather new semi-analytical method towards investigating the free vibration analysis of generally laminated composite beam (LCB) with a delamination is presented. For the first time the combined effects of material couplings (bending-tension, bending-twist, and tension-twist couplings) with the effects of shear deformation, rotary inertia and Poisson's effect are taken into account. The semi-analytical solution for the natural frequencies and mode shapes are presented by incorporating the constraint conditions using the method of Lagrange multipliers. To verify the validity and the accuracy of the obtained results, they were compared with the results from other available references. Very... 

Damage tolerance improvement has been reported by laminating aluminum alloys and composites by researchers. Three-layer laminates comprising Al6061 outer layers and Al1050 interlayer have been roll bonded in this research. While most of the works done have focused on fracture properties of roll bonded Al laminates in crack arrester geometry, this study explores their behavior in crack divider configuration. Rolling strain is varied to control the interfacial bonding in laminates. The fracture behavior of laminates and the constituent material was examined via three-point bending and impact tests. This study presents significant improvement in damage tolerance of laminates compared to their... 

Filtered mode shapes are used to detect the presence, location, size and shape of the delaminations in composite laminated plates with various boundary conditions. This method is the extension of a previous study by the authors on the delamination detection in the beams using irregularities of the mode shapes. The mode shapes are filtered to separate the smooth and irregular parts. Presence and situation of delamination affects these separated parts, and these effects are used to detect the delamination. Here, two new indicators, named 'slope of smooth part' and 'irregularities in the slope of smooth part', are introduced to increase the clarity of detected damage and reduce the noisy... 

The dynamic response of a delaminated composite beam under the motion of an oscillatory mass moving with a constant velocity has been studied. The delaminated composite beam is modeled as four interconnected sub-beams using the delamination limits as their boundaries. The constrained model is used to model the delamination region. The continuity and equilibrium conditions are forced to be satisfied between the adjoining beams. A set of derived governing differential equations along with those obtained by imposing boundary conditions are simultaneously solved in a closed form manner. The results for the response of the delaminated beam were compared with those of the intact beam. Furthermore,... 

UHMWPE composite materials are increasingly used in armors design due to their high strength-to-weight ratios and energy absorption capacities. In this study the effect of production parameters upon the terminal ballistic properties of UHMWPE composite were examined under different conditionings. The composite armor plate laminates were produced by hot pressing with three different pressing times from 10-30 minutes and the laminates conditioned at +115, +125, and +135°C. The molding temperature of SK66 fiber composite has the main direct effect on the ballistic absorption energy, so the relation of molding temperature with the adhesive bonding force between layers, the thickness of the...