Sharif Digital Repository

A single‐cylinder marine diesel engine was modified to be operated in reactivity controlled compression ignition (RCCI) combustion mode. The engine fueling system was upgraded to a common rail fuel injection system. Natural gas (NG) was used as port fuel injection, and a die-sel/sunflower methyl ester biodiesel mixture was used for direct fuel injection. The fraction of bio-diesel in the direct fuel injection was changed from 0% (B0; 0% biodiesel and 100% diesel) to 5% (B5) and 20% (B20) while keeping the total energy input into the engine constant. The objective was to understand the impacts of the increased biodiesel fraction on the combustion characteristics and stability, emissions, and... 

In the present study the fuel spray of a gasoline direct injected engine with multi-hole injector is simulated. Simulation inputs data, injection flow rate and spray cone angle are obtained from previous experimental studies. Log-normal distribution with different standard deviation is used for initial droplet size as the primary break-up model in order to reach the agreement between experimental and calculated spray tip penetration. As the first step, only one plume of spray injected into a quiescent air environment is simulated and validated by varying break-up model and standard deviation. Then, with coefficient obtained from the single jet simulation all six spray jets are simulated... 

Reactivity controlled compression ignition has been introduced to implement controllable, clean, and high thermal efficiency without undermining the advantages of premixed combustion. However, simultaneous auto-ignition introduced by reactivity controlled combustion challenges the combustion under higher load operations. This experimental study incorporates a dual phase heat release concept with the purpose of improving the performance of reactivity controlled compression ignition engine. Different ratios of ethanol/diethyl-ether blends (from 0% to 40% diethyl ether and 70% premixed ratio) were applied to a light duty diesel engine at various combustion timings and engine loads. The diesel... 

Unfortunately, energy demands and destruction of the environment from uncontrolled manipulation of fossil fuels have increased. Climate change concerns have resulted in the rapid use of new, alternative combustion technologies. In this study, reactivity controlled compression ignition (RCCI) combustion, which can simply be exploited in internal combustion (IC) engines, is investigated. To introduce and identify extra insightful information, an exergy-based study was conducted to classify various irreversibility and loss sources. Multidimensional models were combined with the primary kinetics mechanism to investigate RCCI combustion, incorporating the second law of thermodynamics. The... 

Reactivity Controlled Compression Ignition can be extended over a wide spectrum of fuels and is anticipated as a promising strategy in meeting current and future emission regulations. In this study, the effect of n-butanol addition on combustion characteristics and emissions in a reactivity controlled engine was investigated experimentally. Different ratios of butanol-diesel blends at different settings of EGR and premixed ratios were applied to a light duty diesel engine. The butanol-diesel blends were directly injected into the combustion chamber while gasoline was injected at the intake port. Combustion phasing was maintained at 2.7 °CA for all of test points by adjusting fuel injection... 

Fetal stem cells, which can be isolated from the organs of fetuses, differentiate along multiple lineages. Their advantages over their adult counterparts include better intrinsic homing and engraftment and lower immunogenicity, and they are less ethically contentious. It is noteworthy that Mesenchymal Stem Cells (MSC) can be activated and mobilized at the site of damaged tissue. Since vascular delivery suffers from a pulmonary first pass effect, direct or systemic injection of MSCs into the damaged tissue is preferred, particularly in the case of versatile tissue ischemia. Ultrasound applies acoustic energy with a frequency above human hearing (20 kHz). Ultrasound imaging or sonography... 

Constant volume transparent test combustion chambers are extensively used for investigating injection and fuel burning properties of various combustion engines. Their configuration depends on the engine type and the research purpose. Material of components, shape and dimensions of the chamber and its parts, ease of use, accessibility, sealing and safety of the assembly are the parameters needed to be considered in designing the test cell. This paper explains, structural design of a test combustion chamber and its optical windows using finite element analysis of ANSYS 12.0 software for bearing high pressure variations and thermal shocks of combustion. It was designed for conducting CNG direct... 

The combination of direct torque control and permanent magnet synchronous motors (PMSMs) provides a highly dynamic drive. In this paper direct torque control method of PMSM is merged with a sensorless control algorithm and a robust flux observer is proposed which results in a high performance highly reliable drive. First a high frequency signal injection method within DTC algorithm is introduced to estimate the rotor position of PMSM. Then the method is modified in order to estimate stator dynamic inductances. The stator inductances are then used in a current model flux observer  

Macroscopic and microscopic characteristics of spray of a Modified Bio-diesel Fuel (MBF), applying direct injection system have been explored and compared with those of conventional diesel fuel. MBF is a new combination of bio-diesel, molasses bio-ethanol, and water, which has been kept as a single-phase bio-fuel, employing an emulsifier. Lower emissions and production costs, higher oxygen content and cetane number are the key advantages of the MBF to be replaced by conventional fossil fuels in internal combustion engines. Applying atomization model, the spray atomization properties such as Ohnesorge number and Sauter Mean Diameter (SMD) have been investigated. Air entrainment analysis has... 

Macroscopic and microscopic characteristics of spray of a Modified Bio-diesel Fuel (MBF), applying direct injection system have been explored and compared with those of conventional diesel fuel. MBF is a new combination of bio-diesel, molasses bio-ethanol, and water, which has been kept as a single-phase bio-fuel, employing an emulsifier. Lower emissions and production costs, higher oxygen content and cetane number are the key advantages of the MBF to be replaced by conventional fossil fuels in internal combustion engines. Applying atomization model, the spray atomization properties such as Ohnesorge number and Sauter Mean Diameter (SMD) have been investigated. Air entrainment analysis has... 

In the present work, the spray characteristics of bio-ethanol and its blends have been experimentally and theoretically investigated. To have a comprehensive study, the effects of ambient condition and injection pressure on the spray of different blends have been considered. Macroscopic and microscopic characteristics of spray such as tip penetration length, cone angle, projected area, volume, Sauter Mean Diameter (SMD), and Ohnesorge number are investigated precisely. Besides, air entrainment and atomization analyses have been carried out to improve mixture formation process. Using curve fitting and least squares method, theoretical correlations have been suggested in such a way to predict... 

Low temperature combustion potentially can improve engine efficiency coupled with the benefits of low nitrogen oxides, and particulate matter emissions, and vice versa high unburned hydrocarbon and carbon oxide emissions through in-cylinder fuel reactions. In this survey, the experiments were carried out using a modified one-cylinder reactivity controlled compression ignition engine, dual-fueled diesel/compressed natural gas and biodiesel/CNG, to investigate the effects of direct injection strategies on the engine combustion efficiency and emission characteristics. Different ratios of biodiesel blends at different premixed ratios were applied to the dual-fuel engine. The results showed that...