Sharif Digital Repository

Many highly populated cities are still struggling to reach clean air targets, while the zero greenhouse gas emission objectives may accelerate the path toward healthy air for all. Still, there is a fine line between intensive electrification's impact on greenhouse gas emissions and criteria air contaminants depending on the source of the electricity. In this study, the previous version of the emission inventory for Tehran was evaluated and re-calculated in a detailed bottom-up approach to provide the most updated data on the contribution of stationary sources derived by power plants vs. mobile sources. The objectives were to update the emission inventory for improved policymaking, study the... 

In this study, the effects of unmodified calcium zinc phosphate (UCZP) and modified calcium zinc phosphate (MCZP) nanopigments (NPs) on the rheological, mechanical, and corrosion protection performance (CPP) of the epoxy (EP) coatings were investigated. Transmission electron microscopy (TEM) coupled with energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) were used to study morphology and overall chemical structure of synthesized calcium zinc phosphate (CZP) NPs, respectively. The grafting of methyltriethoxysilane (MTES) molecules on the surface of CZP was assessed using Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and... 

In situ mixing by dispersive transport of salt and viscous fingering between the injected low-salinity (LS) brine and high-salinity (HS) formation brine can jeopardize the performance of low-salinity waterflooding (LSWF). In our previous papers, we demonstrated that in situ mixing can be suppressed by polymer-enhanced low-salinity waterflooding (PELS), in which a small amount of a viscosifying agent, such as a polymer, is added to the LS stream. Nevertheless, effective mixing control with PELS depends upon several factors and operational conditions, which have not yet been addressed. Therefore, this research focuses on the investigation of the impact of injection parameters, such as the... 

Multiple access methods are the backbone of today's most communication systems. Increasing the efficiency of these schemes is a challenging engineering task. This paper introduces dispersion-division multiple access, a novel multiple-access technique that can improve the efficiency of multiple-access communication systems. When two (or more) pulses experience different Group Delay Dispersion (GDD) values on a propagation medium, they can be synchronized to overlap in time for combining the phase and amplitude of those pulses. This paper suggests the recoverability of these pulses while being mixed in the transmitter by propagating the combined pulse in a negative Group Velocity Dispersion... 

In the bone tissue engineering field (BTE), it is of significant importance to develop bioactive multifunctional scaffolds with enhanced osteoconductivity, osteoinductivity, and antibacterial properties required for lost bone tissue regeneration. In this work, a bioactive glass-ceramic scaffold was manufactured via a novel polymer-derived ceramics (PDC) manufacturing method. To gain antibacterial properties, the silver ions were incorporated in controlled amount along with other precursors in the PDC processing stage. Microstructural and structural properties of the fabricated silicate-phosphate glass-ceramic scaffold were evaluated by scanning electron microscopy (SEM) equipped with energy... 

Reactive extraction development was investigated to extract vanadium ions from sulfate solution in the modified rotating disc column (MRDC). It was found from batch experiments that D2EHPA and TBP concentrations, initial aqueous phase pH, and the concentration of NH4OH as a stripping agent were optimized equal to 0.3 M, 0.36 M, 2, and 1 M, respectively. In the continuous experiments, the effects of rotor speed, aqueous and organic phase flow rates, and mass transfer direction were investigated on the dispersed phase holdup, mass transfer coefficients, and vanadium extraction. The experiment design was based on the response surface design to analyze the dependence of responses with the input... 

Fluid flow in porous media is affected by surface characteristics such as roughness and topography. In this work, to simulate the surface of natural porous structures in transparent interconnected media like micromodels, various degrees of roughness have been artificially created on flat glass substrates via different methods of laser ablation, cream etching, combination of laser ablation and cream etching, and hydrofluoric acid (HF) etching. The obtained surfaces by each method were characterized in detail via field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), energy-dispersive X-ray spectroscopy (EDX/EDS), and surface profilometry. The impact of high... 

Magnesium (Mg) and its alloys have proved promising as biodegradable candidates for the repair of bone tissue. Despite the encouraging bio-related properties of Mg, its high corrosion rate in contact with body fluids still presents a major challenge. An efficient approach to address this issue is to provide a protective coating on Mg. The present research evaluates, for the first time, in vitro bioactivity and biocompatibility of a novel multifunctional composite coating based on poly(methyl methacrylate) (PMMA) biopolymer and bioactive glass (BG) particles on Mg-based implant. Electrophoretic deposition (EPD) was utilized to obtain this coating from a bi-component suspension. Coatings’... 

Hybrid nanoparticle comprising of nanosilica (NS) and nanodiamond (ND), denoted by ND@NS, was synthesized by a two-step chemistry route and then incorporated into styrene-butadiene rubber (SBR) at low concentrations up to 5 phr by a two-roll mill. Physical hybrids of NS and ND, i.e., ND&NS, with a weight ratio similar to chemical hybrid (80:20 for NS:ND), were also incorporated into SBR. Field emission scanning electron microscopy observations revealed very fine dispersion of nanoparticles in the case of physical hybrids (ND&NS). In contrast, agglomerations and aggregation of nanoparticles were evidenced for ND@NS. Tensile and dynamic mechanical analyses exhibited a higher reinforcing effect... 

In recent years, the emission of various pollutants has caused many problems for human life and the ecosystem. The prioritization between different air pollution control scenarios is a challenge between scientists and policy-makers. This study develops an integrated method for sustainable energy planning considering the energy-pollution-health nexus. The paper investigates three main pollutants (i.e., PM2.5, SO2, and NOx) of different emission sources (i.e., industrial, residential, and intra-city and suburban transportations) in twelve scenarios. The American Meteorological Society/Environmental Protection Agency Regulatory Model (AERMOD) is applied to model the air pollution dispersion,... 

The treatment of water contaminated by bacteria is becoming a necessity. The nanomaterials possessing both intrinsic antibacterial properties and photocatalytic activity are excellent candidates for water disinfection. The powdered form of nanomaterials can be aggregated while embedding the nanomaterials into the NFs can overcome the limitation and enhance the photocatalytic activity and transition from UV-light to visiblelight. Here, graphene oxide (GO) was synthesized, grafted to chitosan, and decorated with silver nanoparticles (Ag NPs) to produce Ag-decorated reduced GO-graft-Chitosan (AGC) NPs. The blends of polyacrylonitrile (PAN) and AGC NPs were prepared in various concentrations of... 

Natural soils contain a certain amount of salt in the form of dissolved ions or electrically charged atoms, originated from the long-term erosion by acidic rainwater. The dissolved salt poses an extra osmotic water potential being normally neglected in laboratory measurements and numerical analyses. However, ignorance of salinity may result in overestimation of stability, and the design may not be as conservative as thought. Therefore, this research aims to first experimentally examine the influence of pore water salinity on water retention curve and saturated permeability of natural dispersive loess under saline and desalinated conditions. Second, the measured parameters are used for... 

Polylactic acid (PLA) scaffolds produced by the fused deposition modeling (FDM) method have biocompatibility, close Young's modulus to that of bone, and the ability to make complex shapes. However, PLA has some drawbacks like brittleness, inappropriate mechanical strength and hydrophobicity, and a low degradation rate. In this study, polyethylene glycol (PEG) (5 and 10 wt%) by solving method and titanium (Ti) particles (5 wt%) by two different methods were mixed with PLA to address the mentioned problems. Extruded filaments were investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), and fourier transform infrared (FTIR). Surface morphology of the produced filaments... 

The impacts of dopant nanoparticles, graphene nanosheets (GNSs) and cobalt decorated-graphene nanosheets (CoGNSs), were studied in relation to the wettability and rheological behavior in low-Ag lead-free SAC0307 (Sn–0.3Ag–0.7Cu) solder paste. The solidification range of the solders was evaluated using differential scanning calorimetry. Phase identification in the solder bulk and interface of the solder and copper substrate was carried out by X-ray diffraction and energy-dispersive X-ray spectroscopy. Spreading properties and reactive wetting behavior along with the rheological properties of the solders were also studied. Results showed that the addition of both nanoparticles did not... 

Consumption of fossil fuels in residential, industrial, and transportation sectors has a significant contribution to air pollution and high attributable premature deaths. To target specific strategies for reducing health effects, the anthropogenic sources and their contributions should be identified. This article provides an integrated modeling approach to evaluate the sector-specific contributions of different PM2.5 sources on air pollution and relevant health impacts. The dispersion of emissions from different sources is modeled by the American Meteorological Society/Environmental Protection Agency Regulatory Model (AERMOD), and the health impacts are estimated by the Environmental... 

Research on the characteristics of composites material has received enormous interest in recent years. The multi-scale nature of composite material leads to employing advanced techniques. Moreover, the presence of a wave with the high-frequency source adds complexity to the analysis. In this paper, a novel multi-scale elasticity model was developed to predict the wave dispersion property of particulate composites. The methodology was based on the simultaneous participation of translational and rotational degrees of freedom in motion equations. The method scheme of gaining motion equations was accomplished by using Taylor's expansion as a continualization method. The framework of the motion... 

In this contribution, the effect of physical immobilization of methylene blue (MB) into silica nanocomposites was investigated on the conversion and selectivity of the photooxygenation of anthracene and dihydroartemisinic acid (DHAA). Physically immobilized photocatalysts were synthesized through a developed Stöber method and were thoroughly characterized by UV–Vis, FTIR, XRD, XPS, SEM, TEM, HR-TEM, BET-BJH, and EDX analyses. Based on the TEM and UV–Vis results, it was determined that enhancement of the MB concentration as an organocatalyst for the Stöber reaction led to an increase in the size of the nanoparticles from 54 to 183 nm and a 21 nm blue shift in their UV–Vis spectra. Moreover,... 

Hyperbranched polyethyleneimine functionalized silica (PEI-SiO2) nanoparticles with considerable hydrophilicity were synthesized and incorporated into a polysulfone (PSF)/dimethylacetamide (DMA)/polyvinylpyrrolidone (PVP) membrane casting solution in five different ratios to fabricate PEI-SiO2/PSF nanocomposite membranes using nonsolvent-induced phase separation. The hydrophilic PEI-SiO2 nanoparticles were characterized by TEM, FTIR, TGA, and XPS analyses. Morphology, water contact angles, mean pore sizes, overall porosity, tensile strengths, water flux, antifouling and the dye separation performances of the PEI-SiO2/PSF membranes were also studied. The PEI-SiO2 nanoparticles were uniformly... 

Abstract: Bead-on-plate submerged arc welding was conducted on St37 steel by manufactured Cr, Mo, and Cr–Mo active basic fluxes produced via the unfused bonded method. The base metal heat-affected zone and weld metal (WM) microstructures were identified and characterized by optical microscopy and scanning electron microscopy. Furthermore, each element’s recovery rate (η) and slag factor (α) determine the amount of element transferred from flux into WM. Then, the ferrite morphologies volume fraction of WMs was measured. Moreover, the chemical analysis of slag and inclusions was evaluated by point scan energy-dispersive X-ray spectroscopy and extensively discussed. The number density and... 

The present work is expressed to interpret the hydrodynamic parameters of rotation extraction columns in the reactive and non-reactive systems. The solvent extraction technique has been utilized for optimizing the transportation of molybdenum ions to the organic phase in two agitated columns (ORC and Kühni columns). Dispersed phase volume fraction, average droplet diameter, slip velocity, size distribution, and ions permeability of the aqueous phase have been investigated in terms of changing the operational variables including the agitation rate, flow rate of the inlet dispersed and continuous phases, column geometry, and reaction conditions. By considering the reactive and non-reactive...