Sharif Digital Repository

Nowadays, one of the most major problems in drilling industry is Lost Circulation in different formations. Lost Circulation increases non-productive time, expenditures and environmental damages. Lost Circulation can happen in natural or induced fractures, cavernous formations and high permeable rocks and it can be subcategorized in seepage, medium, severe or complete type based on the severity of the problem. For addressing this issue, different methods are suggested. One of the most considered of these methods is using Lost Circulation Materials (LCM). In this thesis, it was tried to manage the situation with Designing and engineering of lost circulation materials for different lost... 

Drilling fluid is one the most important part of drilling operations in the oil and gas wells digging. From an economic point of view, almost 25 to 45% of drilling costs are allocated to drilling fluid. Drilling fluids consist of several components with different physical and structural forms which can be assumed as complex fluids. Optimum performance of the drilling process could be obtained through the dynamic fluid computation which requires a reliable mathematical model capable to predict transient-state and steady-state rheological behavior of drilling fluid. Generalized Newtonian models, such as the Bingham-plastic model, the power model, and the Herschel-Bulkley model, are the most... 

Currently, one of the most important problems in the field of drilling is the issue of drilling fluid loss in different formations. The problem of mud loss has been evident since the beginning of oil and gas well drilling operations, so that oil companies spend millions of dollars annually to solve the problem of mud loss. Problems such as pipe jamming, loss of rig production time, well blowout, loss of a large volume of drilling mud and damage to reservoir formations due to loss of drilling fluid are caused. Regarding the drilling variables, many factors cause the decrease or increase of the loss, the most important of which are the weight on the drill bit, drilling speed, the rate of... 

The aim of this project is designing Suitable drilling fluid applicable in deep drilling. This aim will be reached by adding a temperature-resistant polymers or nanomaterials in water-based drilling fluid, Rheological properties of drilling fluid checked. Stability of rheological properties of drilling fluids not constant in HT state. Chain of cause and effect will happen, While the temperature increases, the viscosity and yield point of the fluids decreases. cuttings transportation and removal efficiency will be decreased due to reduction in yield point and viscosity. Evaluation of The effect of these cases conclude that these effects will also impact on filtration loss. The reason is that... 

Formation damage in petroleum engineering is an important and fundamental phenomenon. During drilling operation, penetration of either the solid phase of drilling fluid or the base-fluid into the porous medium, reduces the permeability of the formation. While most experiments in the literature have focused on core-scale and beyond, there is lack of pore-scale studies. Moreover, presence of fractures has an undeniable effect on the extent of formation damage. Thus, the main objective of this dissertation is to investigate the effects of fractures on the severity of formation damage caused by the water-based drilling fluid and the mechanisms of formation damage at the pore scale, using glass... 

Formation damage is one of the most important challneges in hydrocarbon production; drilling mud invasion is one of its common types. This damage is caused by the penetration of the drilling fluid into the porous media, which its filtrate and solid pareticles block the pores and cause permeability reduction. The main purpose of this thesis is to investigate the pore-scale mechanisms of the formation damage induced by invert-emulsion drilling fluid and to investigate the effect of adding nanoparticles to the drilling fluid on the severity of the damage using microfluidic technique. According to the latest published articles, there has not been any research conducted at the pore-scale with... 

Currently, drilling such as vertical or straight-hole drilling, i.e. usually less than 30 degrees inclined, or deflection drilling is used to drill at conventional and even unconventional reservoirs around the world to increase recovery factor and productivity. A major challenge is cleaning the hole or removing debris which if not done properly can lead to problems such as stuck pipes. In addition, Improper use of drilling fluid in terms of rheological properties in different stages of drilling operations can cause the well to collapse due to the accumulation of particles in the annular space. The transfer speed of particles is very important in cleaning the well. Inefficient cleaning of... 

During all operations in oil and gas reservoirs, it is possible to cause formation damage. These damages can greatly reduce the rate of production. One of the major damages that can seriously affect the performance of a reservoir is the damage caused by drilling fluid. The main purpose of this thesis is to study the main mechanisms of formation damage caused by water-based drilling fluid using a glass micromodel for the first time. An accurate understanding of the mechanisms of formation damage can provide a good understanding of the selection of the type and concentration of materials used, as well as appropriate methods to control and eliminate damages. for controlling the drilling fluid... 

One of the most important challenges in drilling horizontal and directional wells is the optimization of hydraulics and hole cleaning and ECD management. In these wells, poor hole cleaning can lead to formation of cutting bed on the low side of the annulus and cause problems such as stuck pipe or increase in torque and drag. Also poor hydraulic design can lead to decrease in rate of penetration and thus, increase in costs. Mud weight should be placed inside the range of mud window (more than pore pressure and less than formation fracture pressure) in order to prevent kick of reservoir fluid or mud loss.In this thesis, the main goal is to optimize hydraulics and hole cleaning and manage ECD... 

Constant drilling in the shale formation causes many problems such as shale swelling and well instability. Annually many costs are spent dealing with these problems in the drilling industry. Many factors can affect this issue. The most important factor is the type of drilling fluid and its additives. The use of oil-based mud is the best option to deal with the clays instability but, due to environmental problems resulting from OBM, their use has been banned in most parts of the world. Therefore, the water-based mud is the only option for the oil industry that can modify its property by use of additives. In this study, the muds contain Nano silica have been introduced. Silicate as shale... 

During the over balanced drilling operation in high permeability or fractured formations, drilling fluid loss and in more severe occasions fluid lost occurs which causes many problems and dangers and delayed the drilling operation until it was repaired. On the one hand, because of the high value of this material, and on the other hand, due to the increase in rig/day costs resulting from lost circulation control, leads to a significant increase in drilling costs. In this research, polymer-fiber composites have been designed and manufactured using extrusion method and have been investigated as fluid lost control agent in the laboratory scale for the first time in Iran. The effective parameters... 

Because of the importance of simulations in the oil industry, there are different software applications designed for this purpose. The purpose of the simulation in the oil industry is to reduce operational errors during the operation and to achieve the most ideal mode of operation. However, in the simulation of multiphase fluid flow because of the special circumstance, simulation plays an important role in the oil industry. OLGA multiphase flow simulation software is a strong simulation software for water, oil, Gas wells, wellhead facilities, refineries and pipelines and it is capable of simulating pipelines under various dynamic conditions. Simulation of drilling hydraulic parameters is... 

One the basic challenges during drilling of both vertical and horizontal wellbores is due to mud filtrate invasion into the formation. Addition of nanoparticles to composition of drilling fluid has been recognized as a measure of control and reduction of filtrate invasion. Despite notable advances in formulation of nano-enhanced drilling fluids, effects of surface wettability of nanoparticles on their performance have not been studied with any precision. Moreover, return permeability of a grain packed porous media after extreme invasion by mud filtrate has not been experimentally measured in a radial system, yet. The last but not least, Generation and development of mud cake opposite the... 

The purpose of this project is to design a water-based drilling fluid for use in high-pressure and high-pressure conditions (Deep Drilling). This goal is usually achieved by adding the resistant polymers to the ambient conditions (temperature stability) to the drilling fluid (here the blue base fluid), and then the rheological properties of the fluid are studied. The stability of the rheological properties of the fluid in high temperature and high pressure conditions is not constant. In this situation, a sequence of events occurs, for example, decreases with increasing viscosity and turbulence, and hence the reduction of drilling fractures and the efficiency of the bottom of the well is... 

Transport of drilling cuttings at the bottom of the well has always been one of the common problems of oil and gas drilling, which causes stock pipe or reduce the penetration rate and other problem. For this reason, the design of drilling fluid is one of the important drilling problems to be considered in order to optimally transfer drilling cuttings to surface. So far, many papers have been devoted to optimizing the drilling fluid for the transport of cuttings, but these papers focus on the state of drilling fluid static and less to model the dynamics and to examine the interaction between the cuttings and drilling fluid. At this end this study will modeling the drilling fluid flow using... 

Aphron drilling fluids or CGA fluids are the wellknown updated drilling fluids in recent years.this kind of drilling fluids can control the mud loss into the formation and thus reduce formation damage and drilling costs. its structure consists of two phase fluid (gas and liquid) that the aphrons are the micro bubbles with 10 to 100 micrometer diameter that have strong stability in liquid phase compared to foamy drilling fluids. Generally aphron drilling fluids are made of base drilling fluid and surfactants, for more stability, mixed surfactant-polymer additive is so beneficial. in the last two decades, the Lattice-Boltazmann method is introduced for computational fluid dynamic area and... 

Given that the mean of the cost of drilling operation related to the required martials and preparation of the drilling fluids, therefore, the design and construction drilling fluid which omit has to be a proper rheology is essential in drilling operations and oil industry. A desirable property of the drilling fluid is the minimum fluid loss volume which can be achieved by formation of a low permeability filter cake on the wellbore. Drilling fluid filtrating invasion into the formation can cause formation damage and reduction in the productivity of the well. In drilling fluids, a series of natural synthetic and polymers may be used as fluid (filtration) loss control additives. However, high... 

Water base drilling fluids are the most common drilling fluids in oil and gas operations and biopolymers are the requisite additives used in such kind of fluids frequently. Unfortunately, at harsh conditions of HPHT the polymers undergo thermal degradation which cause serious loss in fluid rheological and filtration properties. Accordingly, this will induce operational pitfalls and tremendous cost. The power of economy along with environmental regulations force us to search for reasonable chemically benign additives to fulfill this need. Nanoparticles are the most promising additives proposed in this study to address this challenge. Regarding their unique exclusive properties, they are able... 

In recent years, utilizing the colloidal gas aphron (CGA) drilling fluids is getting more and more commonplace due to their little formation damage and filtration loss. This study tries to investigate the effect of presence of nanoparticles and their type (hydrophobicity) on stability and performance of water and oil based CGA drilling fluids. This is done through analyzing stability, filtration, rheology, and pore blockage tests. Water and oil based CGA drilling fluids consisted of stabilizer, surfactant, and nanoparticles are generated and through examining of the effects of polymer, surfactant, and nanoparticle concentrations, the optimum formulation is obtained. High pressure-high... 

In past two decades, the direction of oil and gas exploration has moved towards deep water drilling. The pressure and temperature in these zones are ideal for gas hydrate formation that can cause serious and sometimes uncontrollable issues during drilling operations. Gas hydrate formation while drilling can cause problems such as occurrence of kick and blowout, plug chock and kill line, and change in rheology of drilling mud. On the other hand, nowadays, nanotechnology has created an evolution in engineering sciences and because of the wide range of this science, drilling industry is affected like other industries. In the meantime, because of high yield, high stability and various methods of...