Sharif Digital Repository

Regarding the importance of rheological properties of water based drilling fluids, the effects of silica nanospheres, multiwall carbon nanotubes (MWCNTs) and two types of their hybrid, i.e. H1 (80 wt.% silica nanosphere/20 wt.% MWCNT) and H2 (50 wt.% silica nanosphere/50 wt.% MWCNT) on the viscosity and density of distilled water were investigated. According to the results, viscosity and density of the nanofluids increased with the concentration, while they were reduced by increasing the temperature. At high concentrations, the least increase in the viscosity of distilled water by adding the nanomaterials is related to H2 (8.2% increase at 1.0 wt.%). Likewise, the optimum operating... 

The authors carried out the study to prepare chitosan N-isopropylacrylamide hydrogel via heating and radiation processes. Properties investigation of prepared samples revealed that radiation prepared samples show higher yield and swelling ratios in comparison with the heating prepared ones. Effects of hydrogel addition to drilling mud on its important rheological properties such as apparent viscosity, plastic viscosity, and stress-strain behavior are measured. The rheological properties of hydrogel were compared with cellulosemethylcarboxyl and resins that are widely used in drilling fluid. The results demonstrate that whereas linear polymer effects on mud properties are more significant in... 

The proper understanding of rheological characteristics of CGA based fluids is of crucial importance in determining the performance of the fluid, in order to maintain the most effective fluid properties for safe, efficient, and economical drilling operation. This paper presents a concise investigation on the effect of concentration of the three main components of a novel environmentally friendly lightweight CGA based drilling fluid, i.e., xanthan gum biopolymer, starch, and biosurfactant, to the Herschel-Bulkley rheological model parameters. The three parameters of Herschel-Bulkley model, i.e., yield stress, fluid consistency, and fluid flow index were calculated by fitting the experimental... 

Recently, a renewed interest arises in the application of nanotechnology for the upstream petroleum industry. In particular, adding nanoparticles to fluids may drastically benefit enhanced oil recovery (EOR) and improve well drilling, by changing the properties of the fluid, rocks wettability alteration, advanced drag reduction, strengthening the sand consolidation, reducing the interfacial tension and increasing the mobility of the capillary trapped oil. In this study, we focus on roles of clay nano-particles on polymer viscosity. Polymer-flooding schemes for recovering residual oil have been in general less than satisfactory due to loss of chemical components by adsorption on reservoir... 

Field evidence indicates that the thermal and chemical regimes in wellbore considerably affect the wellbore stability. This study presents a general coupled model for transport of solute, solvent and heat including their combined effects on the wellbore stability. Optimization of drilling fluid parameters is crucial for wellbore stability analysis particularly in high pressure-high temperature environments. The coupled effects of chemical potential and temperature gradients on fluid flow significantly change the pore pressure and stress around a borehole. The effects of various parameters such as mud weight, solute concentration gradient, shale properties, and temperature gradient on... 

The coupling of rock and thermal stresses along with fluid pressure are particularly important in fractured rock masses, since stress-induced changes in permeability can be large and irreversible under perturbations resulting from various natural and induced activities. A new method is presented to model fracture permeability changes during drilling in fractured rocks. The approach includes finite element method (FEM) for fully coupled thermo-poroelastic analysis of stress distribution around borehole and displacement discontinuity method (DDM) to model fracture deformation. Three cases of overbalanced, underbalanced, and balanced drilling fluid pressure conditions are employed. The... 

In this paper, the impact of three parameters including nanoparticles geometry, particles aggregation and borehole inclination on induced formation damage from water based drilling fluids were investigated by means of experimental studies. Accordingly, we designed a dynamic filtration setup capable to rotate and change well inclination. Nano-based drilling fluids consisting of spherical, cubical and tubular shapes nanoparticles as fluid loss additives were used. Mud cake quality, core permeability impairment and degree of formation damage at various well inclinations were examined. The cluster structure of aggregated particles were determined using fractal theory and applying dynamic light... 

In this paper, the impact of three parameters including nanoparticles geometry, particles aggregation and borehole inclination on induced formation damage from water based drilling fluids were investigated by means of experimental studies. Accordingly, we designed a dynamic filtration setup capable to rotate and change well inclination. Nano-based drilling fluids consisting of spherical, cubical and tubular shapes nanoparticles as fluid loss additives were used. Mud cake quality, core permeability impairment and degree of formation damage at various well inclinations were examined. The cluster structure of aggregated particles were determined using fractal theory and applying dynamic light... 

In this paper a nonlinear dynamic model for drill string in inclined well drilling is developed. Effects of drilling mud flow rate, weight on bit, angular velocity along with viscous damping on stability and vibration of the drill string are studied. Findings indicate the nonlinear effects are significant on the results. The effects of drilling mud flow rate and weight on bit on the natural frequencies and time responses are evaluated. Enhancement of drilling mud flow rate results in decreasing of natural frequencies and vibrational amplitude, while increasing the weight on bit, leads to decrease of the natural frequencies and increase the vibrational amplitude. © JVE INTERNATIONAL LTD  

High molecular weight polyacrylamide (PAM) nanoparticle dispersions are products with wide application possibilities, the most important of which is in petroleum industry such as drilling fluid and flooding agent in enhanced oil recovery. For that aim, it is necessary to achieve complete control of the final dispersion and polymer properties during the synthesis step. In this work, PAMs were synthesized by inverse emulsion polymerization of aqueous acrylamide solution in cyclohexane in the presence of emulsifier mixture of Span 20 and Span 80. We present a comprehensive study of the effects of variation of all important reaction conditions (agitation rate, reaction time and temperature,... 

In drilling oil wells a system of complex fluids and chemical additives is used. Losses of these fluids in the well during drilling or disposal of them in well site could transfer pollutants to groundwater. In the present study a number of well sites, located in South of Iran, were studied to indicate types and magnitude of various pollutant materials that remain in the environment undestroyed and have considerable impacts on the underground water resources. Hydrocarbons used in Oil Base Muds (OBM) that can't be biodegrade readily in nature found to be the most severe pollutant material caused by disposal of Drilling Mud and Cuttings. Volume of drilling waste for these oil wells evaluated to... 

Application of the fiber contained fluids has been extensively increased in many industries. In the petroleum industry, fibrous fluids are utilized for different applications. For instance, they have been applied in drilling operations for hole cleaning and cutting removal. In this article, the results of the studies performed on the application of Hydrated Basil Seeds (HBS) as the herbal eco-friendly fiber on hole cleaning and filtration control were presented. In order to investigate the application of HBS on hole cleaning, Polyacrylamide (PA) was added to the pure water to provide the base fluid and HBS at different concentrations were suspended in the base fluid and the effect of HBS on... 

Application of the colloidal gas aphrons (CGAs) in minimizing formation damage by plugging pore mechanism is now wildly accepted due to numerous successful field experience. One of the pivotal factors which affects the pore blockage ability of micro-bubbles is their stability. This experimental study tries to investigate the possible synergistic effect of nanoparticles on improving the stability and other properties of non-aqueous CGA drilling fluids, in both bulk and porous media. In particular, two types of hydrophobic nanoparticles including silicon dioxide nanopowder coated with 2 wt% Silane and nanoclay, in presence of a treated version of bentonite (Bentone 34) as a stabilizer and... 

Colloidal gas aphron (CGA) based fluids have recently been introduced to develop depleted hydrocarbon reservoirs due to their ability in controlling fluid losses. Bubbles size of CGAs plays an important role in pore blockage ability as the controlling mechanism in fluid invasion reduction. However, fundamental understanding of how bubble size distribution is controlled by polymer and surfactant concentrations is not well discussed in the available literature. Almost all reported experiences on CGAs sizing were conducted on single bubble behavior, and little attention has been given to the variation of bubble size distribution (BSD) of CGAs at different levels of polymer/surfactant... 

Appropriate execution of drilling operation, in particular for high pressure and high temperature wells, requires accurate knowledge of behavior of the drilling fluid density as a function of pressure and temperature. In this communication, a novel mathematicalbased approach is presented to develop a reliable model for predict the density of four drilling fluid including water-based, oil-based, Colloidal Gas Aphron (CGA) and synthetic. To pursue our objective, a predictive model is proposed using a robust soft computing approach namely least square support vector machine (LSSVM) modeling optimized with coupled simulated annealing (CSA) optimization tool. Moreover, leverage approach, in which... 

Filtrate and solid invasion from drilling fluids are two key sources of formation damage, and can result in formation permeability impairment. Typically, spurt invasion of mud solids causes the evolution of an external mud cake which tends to reduce further solids and filtrate influx. However, uncontrolled spurt and filtrate invasion are detrimental because they reduce the permeability of the formation. Mud composition, formation rock's permeability and porosity, and temperature can influence both spurt and filtrate invasion. The sizes of mud solids relative to the average pore size of a rock are also important in predicting the extent of mud invasion and permeability impairment. In this... 

Cutting transport is an important goal in drilling operation especially in horizontal and deviated wells since it can cause problems such as stuck pipe, circulation loss and high torque and drag. To this end, this article focused on the affecting parameters on the cutting transport by computational fluid dynamic (CFD) modeling and real operational data. The effect of drilling fluid and cutting density on the pressure drop, deposit ratio and string stress on the cutting transport has been investigated. A systematic validation study is presented by comparing the simulation results against published experimental database. The results showed that by increasing two times of drilling fluid... 

To improve the thermal stability of starch in water-based drilling fluid, monoethanolamine (MEA) was added, and the effect was investigated by laboratory experiment. The experimental results show that the addition of monoethanolamine (MEA) increases the apparent viscosity, plastic viscosity, dynamic shear force, and static shear force of the drilling fluid, and reduces the filtration rate of drilling fluid and thickness of mud cake apparently. By creating hydrogen bonds with starch polymer, the monoethanolamine can prevent hydrolysis of starch at high temperature. Starch, as a natural polymer, is able to improve the rheological properties and reduce filtration of drilling fluid, but it works... 

In drilling industry, barite particles settling and barite sag as a major problem can potentially impose significant operational issues. Static conditions, in which well undergoes an extended shut-in period, could occur during different drilling and completion operations such fishing operation, tripping, and logging. Despite its importance, such phenomenon is not well understood yet. To avoid issues related to barite settlement and barite sag, a good understanding of the impact of different drilling parameters on barite settlement and sag phenomenon is required. Recently, the mathematical formulation and modeling of settlement and sag processes have gained more attention. In order to better... 

To improve the thermal stability of starch in water-based drilling fluid, monoethanolamine (MEA) was added, and the effect was investigated by laboratory experiment. The experimental results show that the addition of monoethanolamine (MEA) increases the apparent viscosity, plastic viscosity, dynamic shear force, and static shear force of the drilling fluid, and reduces the filtration rate of drilling fluid and thickness of mud cake apparently. By creating hydrogen bonds with starch polymer, the monoethanolamine can prevent hydrolysis of starch at high temperature. Starch, as a natural polymer, is able to improve the rheological properties and reduce filtration of drilling fluid, but it works...