Sharif Digital Repository

This paper presents an unilateralization technique for distributed amplifiers (DAs) based on the transformer coupling between the gate and drain lines. Theoretical analysis of the DA indicates that the voltage waves in the gate and drain lines can be described by a system of linear partial differential equations. The transformer coupling between the lines allows for cancellation of the reverse transmission coefficient of the system. There is an optimal value for the coupling coefficient between the lines that unilateralizes the DA. This optimal coupling coefficient is derived in terms of the gate-drain capacitance and capacitances of the gate and drain lines. Using the proposed technique,... 

A practical coplanar Josephson junction left-handed transmission line based on a step-edge junction technique is proposed in high-temperature superconductor technology and analyzed by electromagnetic simulations. The layout is designed for monolayer Yttrium Barium Copper Oxide thin film fabrication process. The propagation stopbands are tunable by controlling bias currents of Josephson junction arrays acting as parallel inductors for unit cells of the transmission line. Unlike the reported designs, each unit cell of our left-handed transmission line is independently biasable due to dc isolation of the unit cells along the transmission line. Being individually biasable is practically... 

The transmission-line analogy of the planar electromagnetic reflection problem is exploited to obtain a transmission-line model that can be used to design effective, robust, and wideband interference-based matching stages. The proposed model based on a new definition for a scalar impedance is obtained by using the reflection coefficient of the zeroth-order diffracted plane wave outside the photonic crystal. It is shown to be accurate for in-band applications, where the normalized frequency is low enough to ensure that the zeroth-order diffracted plane wave is the most important factor in determining the overall reflection. The frequency limitation of employing the proposed approach is... 

A simple transmission line model is presented to emulate field behavior in a one dimensional metallic grating in TE polarization. The proposed model is based on the fact that pairs of adjacent metallic strips in the structure act as a parallel plate waveguide supporting TE guided modes for low enough frequencies. The effect of fringing fields is also included and a very good approximate model is obtained to simulate metallic gratings in TE polarization  

Operation of transmission lines are usually limited by stability limits rather than thermal capacity limits. Thermal limit of transmission lines is a physical limitation of their components and not related with the overall power system characteristics, but stability limits are strictly related with power system characteristics. This paper presents an approach for increasing stability limits using PSS. © 2008 IEEE  

A dual-band neutralization technique based on the transformer feedback between the drain and the gate of a transistor is presented. The drain and gate bias lines of the transistor are realized as multiorder LC networks. Transformer coupling between the inductors of the two networks can be used to concurrently neutralize the gate-drain capacitance of the transistor at multiple frequencies. Moreover, these frequencies can be placed close together to achieve wideband neutralization. A proof-of-concept dual-band 27/33-GHz amplifier is designed and implemented in a 0.1-μm GaAs pseudomorphic high-electron mobility transistor process. The maximum gain of the transistor at the two frequency bands is... 

Properly terminating a transmission line, in order to transfer the maximum available power to the load, is an important issue. The problem, fully analyzed in linear lines, is still considered as a persisting problem in the area of nonlinear transmission lines (NLTLs). In this paper, an accurate analysis is presented which gives a closed-form formula for the matching efficiency of the NLTLs. Using this analysis, optimal resistive terminating load for the NLTLs was extracted. These results will considerably ease the design of all kinds of the NLTL-based systems, such as high-frequency oscillators and ultrashort pulse generators. This consistent analysis also gives the reflection coefficient... 

Nonlinear transmission lines (NLTLs) are one of the most prominent solid-state sources of high-power RF pulses. However, there is no integrated mathematical basis, which predicts adequately the generated waveforms on an NLTL and those delivered to the load. This analysis is required for designing and optimizing these transmission lines. Most works in this area are related to experimental studies and results. In this paper, we have developed a theoretical basis, which predicts all the required characteristics of the generated RF pulses on a lossy NLTL. The RF amplitude, the maximum voltage, and the central frequency of the generated pulses at each node of an NLTL are formulated. All the... 

Nonlinear transmission lines (NLTLs) are passive networks with the capability of modulating baseband pulses. These networks are used for generating RF pulses at high-power levels. NLTLs have a unique performance in high-power RF pulse generation among all the generators based on the solid-state technology. A high-power rectangular pulse is injected to the line, gradually evolved into an oscillatory pulse while propagating through the network, and finally, in the form of a high-power RF pulse, is delivered to the load. Properly terminating an NLTL, in order to transfer the maximum available RF power to the load, is an important problem. In this paper, an accurate analysis is presented, which... 

This paper presents analysis of electric field distribution and optimization of C-type corona rings for 400 kV V-insulator strings composed of ceramic insulator units which are the most common configuration of overhead transmission lines. These strings are equipped with corona rings to enhance the insulation performance regarding to the effect of these rings on the insulation function and potential and electric field distribution. 3D field simulations are performed for the C-type of corona rings with different dimensions by software based on FEM analysis  

Transmission line formulation is used to analyze two-dimensional low-loss metallic gratings at optical frequencies when plasmonic waves propagate in the structure. This method, like the Fourier modal method, suffers from numerical instabilities when applied to such structures. A systematic approach to avoid these instabilities is presented. These numerical artifacts are attributed to the violation of Li's inverse rule and the appearance of higher-order spurious modes. In this paper, a new approach is proposed to identify and to greatly reduce the effect of these spurious modes based on the accuracy by which these modes are satisfying the conservation of momentum. Furthermore, the proposed... 

This paper introduces a new concept that we call smart transmission expansion planning (TEP) based on unconventional high surge impedance Loading (HSIL) line designs that will revolutionize power delivery. To date, these two areas (TEP and transmission line design) have been conducted separately. For TEP, planners use the electrical parameters of a few standard conventional line designs to study planning scenarios, and then, the final candidate line is constructed. In such a sequence, cost-effective scenarios often do not meet the technical criteria of load flow. This paper will demonstrate that this sequence can be overturned; namely, a transmission expansion planner can get optimal line... 

This paper proposes a comprehensive analytic method for applying various optimal remedial actions to improve critical electromechanical modes damping without jeopardizing damping of non-critical modes and violating security constraints of power system. Generators and reactive power sources redisptach, demand side management and the generators voltage reference tuning are remedial actions that are considered here. Dynamic equations of the flux-decay dynamic model of generators, standard dynamic models of excitation system and power system stabilizer and algebraic equations of active and reactive powers balance are formulated in the quadratic eigenvalue problem framework. With simultaneous use... 

Due to flexibility, relatively small weight and low energy-dissipative characteristics of cables, they are vulnerable to external excitations such as wind, wind-rain, earthquake and traffic loadings. Among them, galloping phenomenon is one of the most important sources of electrical/mechanical failures in power transmission lines. In this paper, tuneable vibration absorbers (TVAs) are used to suppress galloping forced vibrations (as a semi-active control approach). Using mode summation technique, mathematical model of the hybrid problem including the transmission line and an arbitrary number of absorbers is presented. Developing a sophisticated multi-loops optimization algorithm, best values... 

Electric networks often consist of remote cities or villages with low population densities, which consume a considerably small amount of energy. This can be in the order of a few megawatts for places that are up to 100 km away from the source. Typical uncompensated primary distribution lines are not an effective option for these situations, since line loadability drastically decreases as the line length is increased. Increasing the voltage level, on the other hand, is not cost effective. This paper investigates different reactive compensation techniques for increasing the loadability of these lines. Effect of series capacitors, shunt capacitors and voltage regulating transformers in such... 

Distributed power generation and an ever growing load demand have caused the current level of fault to exceed the nominal rating of power system devices, and fault current limiters are needed even more. The Superconducting Fault Current Limiter, SFCL, forms an efficient category of current limiters. The superconductor part in SFCLs is the most costly part of the device, and minimizing its volume, while maintaining the required characteristics of the device, would be very beneficial. In this work, using a Simulated Annealing optimization algorithm, a method has been proposed to determine minimum required bulk superconductor material in inductive shield-type SFCL structures. The flux linkage... 

The deployment of flexible ac transmission system (FACTS) devices, despite miscellaneous benefits and applications, has been restricted mainly due to their large investment costs. Accordingly, the notion of distributed FACTS (D-FACTS) was recently proposed. Distributed static series compensators (DSSCs), as a new member of D-FACTS, are directly clamped to conductors of transmission lines. The possibility of controlling the compensation rate of DSSCs from the control center affords the active control of network power flow. This paper presents a comprehensive reliability model for the DSSC. The model is then reduced and a state-space representation is extracted for a transmission line with a... 

The deployment of flexible ac transmission system (FACTS) devices, despite miscellaneous benefits and applications, has been restricted mainly due to their large investment costs. Accordingly, the notion of distributed FACTS (D-FACTS) was recently proposed. Distributed static series compensators (DSSCs), as a new member of D-FACTS, are directly clamped to conductors of transmission lines. The possibility of controlling the compensation rate of DSSCs from the control center affords the active control of network power flow. This paper presents a comprehensive reliability model for the DSSC. The model is then reduced and a state-space representation is extracted for a transmission line with a... 

Open access to transmission networks as well as designing an efficient cost allocation method are the key points that provide free competition for participants in power market. Restructuring in power systems has created new challenges which emphasize the development and fairness of economical criteria such as pricing of different services in market environment. Besides, the charge of network usage is a controversial subject, itself. To address this problem, many methods for transmission line cost allocation have been proposed. Amongst them, MW-Mile methods are based on the extent of use concept. Inability to take various fixed together with variable imposed costs into account can be... 

This article proposes a tunable composite right-/left-handed transmission line consisting of a transversely magnetized ferrite substrate periodically loaded by microstrip inductors. The gapless transition between the left- and right-handed bands (balanced response) is the main characteristic of this structure. This composite right-/left-handed transmission line is proposed in both reciprocal and nonreciprocal versions. Based on periodic structure analysis, the dispersion relation is estimated theoretically and validated numerically by the finite-element method in the reciprocal case. Theoretical and numerical results demonstrate the tunability of the proposed structures by changing the DC...