Sharif Digital Repository

Triboelectric nanogenerators (TENG) have been reported with attractive benefits such as adaptability, lightweight, and simple integration, are interesting for self-powered sensor design. Herein, an innovative magnetically circular layers TENG (MCL-TENG) are reported for velocity sensing and damage detection. The key role of this structure is the magnets fixed on the device, providing attractive force to move. The electrical performance of MCL-TENG under loading condition is investigated experimentally. According to the structure of the magnetic system, the MCL-TENG can effectively react to a frail striking and can be utilized to consider the speed parameters and detecting crack without the... 

An investigation into the addition of different weight percentages of Fe3O4 nanoparticles to find the optimum wt.% and its effect on the microstructure, thermal, magnetic, and electrical properties of aluminum matrix composite was conducted using the powder metallurgy method. The purpose of this research was to develop magnetic properties in aluminum. Based on the obtained results, the value of density, hardness, and saturation magnetization (Ms) from 2.33 g/cm3, 43 HV and 2.49 emu/g for Al-10 Fe3O4 reached a maximum value of 3.29 g/cm3, 47 HV and 13.06 emu/g for the Al-35 Fe3O4 which showed an improvement of 41.2%, 9.3%, and 424.5%, respectively. The maximum and minimum coercivity (Hc) was... 

The principal intention of this work is to fabricate and characterize the polyamide/chitosan nanocomposite by a novel single solvent method through the electrospinning procedure. The thermal properties and morphology of prepared nanocomposite are studied by thermogravimetric analysis (TGA) and field-emission scanning electron microscopy (FE-SEM). TGA exposed that the primary decomposition temperature is reduced with rising of chitosan content in the nanocomposites and origin disintegration temperature for polyamide/chitosan nanocomposites is perceived to be in the range from 300 to 500 °C. Also, FE-SEM images demonstrated that the nanofibers of chitosan have good adhesion on the matrix and... 

Herein, we deposited CuInSe2(CISe) thin films by using aqueous spray deposition method and post selenization process. The effect of different indium precursor salts including indium chloride, indium nitrate and indium acetate on the structural, morphological, optical and electrical properties of sprayed CISe layers has been studied by using x-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM-EDS), optical transmission (UV–Vis), Mott-Schottky analysis, I–V dark measurements. Although all the deposited thin films show a chalcopyrite tetragonal ordering structure of CISe, the crystallinity, morphology, and electrical characteristics are strongly influenced by the type of... 

In this study, polyaniline nanoparticles (PANI NPs) in emeraldine base (EB) form were prepared by a modified method and characterized by FTIR and UV–vis spectroscopies. The average size of the nanoparticles was 140 nm measured by DLS method. The nanoparticles were embedded into polylactic acid (PLA) nanofibers prepared by electrospinning method. It was found that inclusion of PANI NPs in PLA resulted in reduced diameter of the fibers during the electrospinning process. Also, the surface of nanofibers appeared smooth in FE-SEM images without formation of beads. Improvement in mechanical and electrical properties of PLA/PANI nanofibers over the neat PLA nanofibers implied a good dispersion of... 

Abstract: The effect of de-siliconization on the oxidation behavior of AISI 430 stainless steel used for solid oxide fuel cell interconnect application was investigated. De-siliconization treatment was conducted via heating steel parts in an H2 environment. The de-siliconized substrates were then coated with a Mn1.5Co1.5O4 spinel coating, using wet spray method. For comparison, a similar coating process was applied on the as-received AISI 430 stainless steel specimens. Oxidation kinetics of coated interconnects were evaluated at 700, 800 and 900 °C in air. Results showed that the de-siliconization surface treatment decreased oxidation rates, with kinetic rates (g2 cm−4 s−1) of 4.39 × 10−14... 

Effect of sandblasting of the copper electrode structures before deposition of gold thin film for micro electrical impedance tomography (EIT) system has been studied experimentally. The comparison has been performed on the unmodified copper electrodes and the sandblasted electrodes before deposition of gold layer, using structural analysis while their performance in EIT system has been measured and analyzed. The results of scanning electron microscopy and atomic force microscopy show that the sandblasting of the electrodes results in the deposition of gold film with smaller grain size and uniformly, comparing to the unmodified structure. The measurement of impedance shows that the... 

In this research, for the first time, SnO2-based varistors were fabricated via spark plasma sintering technique (SPS) and the microstructure and electrical properties of these varistors were investigated. Furthermore, the effect of post-annealing temperature in oxygen atmosphere on electrical properties of the SPSed samples was studied. The SPS process was performed at the sintering temperatures of 600, 650, and 700 ᵒC for 15 min with a maximum pressure of 90 MPa under vacuum condition. The SPSed sample which was sintered at 650 ᵒC possessed maximum density of 98% and the ultra-fine-grained microstructure with the mean grain size of 380 nm. Surprisingly, all SPSed samples exhibited Ohmic... 

In this work, the magnetic and transport properties of micro and nanometer-sized samples of La0.9Ba0.1MnO3 manganite have been studied. The temperature variation of ac susceptibility of the nanometer-sized sample shows one transition at high temperature (265 K). On the contrary, the ac susceptibility of the micrometer-sized sample shows two transitions with a high-temperature transition occurring at 240 K and low-temperature transition around 100 K. The high-temperature transition corresponds to the paramagnetic-ferromagnetic (PM–FM) transition (Tc) and is independent of frequency, while the low-temperature transition is frequency-dependent and shifts toward high temperatures by increasing... 

In this research, fine-grained SnO2-based varistors with a simple microstructure and the mean grain size of 0.8 µm were obtained by the microwave sintering method. The breakdown electric field measured for these varistors was 12 kV/cm that is 3 times higher than the conventional-sintered varistors. The high nonlinear coefficient (60) and low leakage current density (9 µA/cm2) were achieved in fine-grained SnO2 varistors. The fine-grained SnO2 varistors appropriately clamped pulse current surges and the calculated value of the clamping voltage ratio of these varistors was 2. The excellent electrical properties and protective effect of fine-grained SnO2 varistors showed that these varistors... 

Upset resistance dissimilar welding of aluminium and copper narrow rods was performed. Effect of the interface characteristics was studied on the joint mechanical and electrical properties. Upset resistance welding (URW) was successful for production of joints with high strength and electrical conductivity between aluminium and copper rods. Reaction layer at the joint interface was composed of the Al2Cu cellular phase and lamellar eutectic structure of α-Al and Al2Cu. Enhancement of the welding current and decrease in the upset force increased the reaction layer thickness and strength of the joint. URW had no significant detrimental effect on the electrical conductivity of the weld zone.... 

Semiconductor gas sensors have been developed so far on empirical bases, but now recent innovative materials for advancing gas sensor technology have been made available for further developments. Two-dimensional (2D) materials have gained immense attention since the advent of graphene. This attention inspired researchers to explore a new family of potential 2D materials. The superior structural, mechanical, optical and electrical properties of 2D materials made them attractive for next-generation smart device applications. There are considerable improvements and research studies on graphene, molybdenum disulfide (MoS2), tungsten disulfide (WS2), tin sulfide (SnS2), black phosphorus and other... 

Recently, electrode-based Dielectrophoresis (eDEP) has been used for particle manipulation by means of triangular electrodes. In this theoretical and numerical study, a microchannel with quarter-of-ellipse electrodes is presented and a detailed comparison with triangular electrodes is provided. Electric field, resultant DEP force, and particle trajectories for each microchannel are evaluated by means of COMSOL Multiphysics 4.4. Afterwards, focusing and separation efficiencies of the systems are assessed and compared. Finally, separation efficiency of our proposed model for live and dead cells is compared with that of our previous model published in the literature [1]. It is demonstrated that... 

In this study, a thermal method was used to synthesize spinel NiCo2O4 and carbon nanotubes (CNTs)@NiCo2O4 with an average size 50 nm and 20 nm, respectively. Addition of CNTs into NiCo2O4 noticeably increases the active surface area compared to pure spinel NiCo2O4. SEM analyses showed that the morphologies are spherical in both pure and composite samples. Uniform CNTs@NiCo2O4 nanoparticles exhibit high specific capacitance of 210 F g−1 at 2 A g−1 and a good retention capacity of 92.70% after 2500 cycles, which shows a considerable improvement compared to NiCo2O4. Additionally, an exceptional rate capability of about 73.2% was obtained at 50 A g−1. Such remarkable electrochemical performance... 

We report on the MoS2 and MoOx (x = 2 and 3) composite thin layers, electrodeposited, onto a Florine doped Tin Oxide (FTO) substrate. Our results show a change in relative content of these compounds in different thicknesses ranging from ∼20 to 540 nm. This change in the relative content at different thicknesses leads to a change in optical and electrical properties including bandgap and the type of semiconductivity. A sharp transition from p to n-type of semiconductivity is observed by scanning tunneling spectroscopy measurements. We find that the spin-orbit interaction of Mo 3d electrons in the MoS2 and MoO3 enhances by significant reduction of the MoO3 content in thicker layers. © 2017... 

In recent years, the technological advancement of supercapacitors has been increasing exponentially due to the high demand in electronic consumer products. As so, researchers have found a way to meet that demand by fabricating graphene. As developments are made toward the future, two big advancements to be made are large-scale fabrication of graphene and fabricating graphene as a flexible electrode. This would allow for use in larger products and for manipulation of the unique properties of graphene to accommodate superior design alternatives. While large scale production is still mentioned, this review is specifically focusing on different methods used to fabricate graphene as a flexible... 

In this paper, we have studied the properties of SrTiO3 thin films which have been deposited on Si/Ti/Pt substrates using pulsed laser deposition technique. The as-deposited films were annealed at temperature of 700 °C in oxygen environment for 1 h. The surface morphology, crystalline phase and chemical composition of the films were characterized by AFM, XRD and XPS techniques, respectively. The XRD data show that phase transition from amorphous to polycrystalline structure happens and also the lattice constant enhances during annealing process. This enhancement can be related to oxygen vacancies in thin films. The XPS data show partial lack of titanium atoms on the surface. The AFM analysis... 

In order to improve the performance of thin film devices, it is necessary to characterize their mechanical, as well as electrical, properties. In this work, a model is developed for analysis of the mechanical and electrical properties and the prediction of residual stresses in thin films of silver nanoparticles deposited on silicon substrates. The model is based on inter-particle diffusion modeling and finite element analysis. Through simulation of the sintering process, it is shown how the geometry, density, and electrical resistance of the thin film layers are changed by sintering conditions. The model is also used to approximate the values of Young's modulus and the generated residual... 

In recent years carbon nanotubes and other carbon nanostructures such as graphene sheets have attracted a lot of attention due to their unique mechanical, thermal and electrical properties. These structures can be used in desalination of sea water, removal of hazardous substances from water tanks, gases separation, and so on. The nanoporous single layer graphene membranes are very efficient for desalinating water due to their very low thickness. In this method, water-flow thorough the membrane and salt rejection strongly depend on the applied pressure and size of nanopores that are created in graphene membrane. In this study, the mechanism of passing water and salt ions through nanoporous... 

Abstract H2-rich water as a green antioxidant was applied for deoxygenation of graphene oxide (GO) suspensions. The ability of H2-rich water for deoxygenation of GO sheets was found comparable to the ability of hydrazine (as a standard and powerful reductant), using X-ray photoelectron spectroscopy. In fact, the O/C ratio of GO sheets could be reduced from 0.51 to 0.21 and 0.16 by H2-rich water and hydrazine, respectively. More importantly, while C-N bond formation is one of the side effects of GO reduction by hydrazine, no chemical C-N bond was found on the H2-water-reduced GO (rGO) sheets. This also resulted in a better restoration of the graphitic structure of the H2-water-rGO, as...