Sharif Digital Repository

The theory of silicon optical modulators of ring resonators based on PN diode in reverse bias is primarily discussed. It secondarily provides a full-featured simulator to investigate the behavior of such modulators. Wave equation for ring structure will be solved by using the conformal transformation method and the matrix method as it was used to analyze bent planar optical waveguides. Power coupling between ring and straight waveguides will be calculated by coupled theory of nonparallel waveguides based on experimental results. The time response demonstrates the capability of this device to operate correctly at up to 10 Gbs-1 bitrate, and the frequency spectrum analysis of device shows a >... 

There is still an open question of how to prepare high-performance counter electrodes for dye solar cells (DSCs) at room temperature; a requirement for flexible DSCs. Here, we introduce Pt deposited cube-like chromium coating as a low-temperature highly-efficient counter electrode for DSCs. Cr is a chemically stable metal and can be easily electroplated on conductive substrates with high roughness (here ∼160 nm) and cube-like appearance. A cyclic electrochemical deposition method with optimized temperature and number of cycles is used to grow Pt nanoparticles on this surface and charge transfer resistance as low as 0.54 Ω cm2 and 0.27 Ω cm2 were obtained at 40 °C and 55 °C solution... 

Thermal load simulation and sensitivity analysis are performed for a building in Tehran by numerical means. A heat conduction equation of the walls, together with appropriate convection and radiation boundary conditions, is simulated numerically to compute temperature distributions in the walls. This research proposes a heat balance method, coupled with a bulk model, to calculate the building thermal load. In the first step, the results of the building thermal load for weather data of Tehran are compared and validated with those of Carrier HAP software, and a good agreement is found between them. The building thermal load depends on the boundary conditions of the building. The influence of... 

An approximate and accurate enough multi-conductor transmission line model is developed for analysis of side-coupled metal-insulator-metal (MIM) waveguides. MIM waveguides have been already modeled by single conductor transmission lines. Here, the side coupling effects that exist between neighboring plasmonic structures are taken into account by finding appropriate values for distributed mutual inductance and mutual capacitance between every two neighboring conductors in the conventional single-conductor transmission line models. In this manner, multi-conductor transmission line models are introduced. Closed-form expressions are given for the transmission and reflection of miscellaneous MIM... 

Today, structural Health monitoring is a major concern in the engineering community. Multisite fatigue damage, hidden cracks and corrosion in hard-to-reach locations are among the major flaws encountered in today's extensive diagnosis and/or prognosis of aircraft structures. Ultrasonic waves, lamb waves are particularly advantageous because of their propagation at large distances with little damp in thin-wall structures. In this paper a new rectangular shape array of embedded piezoelectric sensors is developed to detect some damages in large planar structures. An artificial neural network is trained to identify the damage state and its location. Output signals of each sensor due to various... 

An efficient method for scattering analysis from slightly rough surfaces is introduced. This method can be used in ray tracing algorithm where the computational efficiency is important due to the complexity and size of problems. In this method, the Kirchhoff approach is used for a periodic extension of the finite surface, which is approximated by strong harmonics of its Fourier series. Typical asphalt surfaces are analyzed by this method in millimeter-wave band and validated with the method of moments. The dominant scattering angles and ray widths of the scattered field can be easily used in ray tracing algorithm. The computation time and accuracy of results show that this method can be used... 

Plasmonic Sierpinski nanocarpet as back structure for a thin film Si solar cell is investigated. We demonstrate that ultra-broadband light trapping can be obtained by placing square metallic nanoridges with Sierpinski pattern on the back contact of the thin film solar cell. The multiple-scale plasmonic fractal structure allows excitation of localized surface plasmons and surface plasmon polaritons in multiple wavelengths leading to obvious absorption enhancements in a wide frequency range. Full wave simulations show that 109 % increase of the short-circuit current density for a 200 nm thick solar cell, is achievable by the proposed fractal back structure. The amount of light absorbed in the... 

SrFe12-xTix/2Zn x/2O19 (x = 0-2.5) powders were synthesized by use of chlorides through co-precipitation method. The obtained powders were then milled by high energy ball mill to crash hard agglomerates and achieve nanoparticles. In order to evaluate microwave absorption versus frequency, composites including ferrite, as a filler, and matrix of polyvinylchloride (PVC) with weight ratio of 70% ferrite were prepared. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), vibrating sample magnetometer (VSM) and vector network analyzer (VNA) were employed to study the structural, magnetic and microwave absorption properties... 

We propose an innovative design for metallic slit-groove nanostructure to increase the propagation intensity of a unidirectional Surface Plasmon Polariton (SPP) light beam. Our idea is based on the combination of the concept of unidirectional plasmonic wave propagation in a metallic slit-groove nanostructure and the well-known hybrid modes of a hybrid metal-dielectric waveguide. Our results demonstrate that the hybrid structure results in up to 5 times enhancement in the SPP beam intensity relative to the conventional design of slit-groove nanostructure. This new design of SPP based nano source can be applied in many applications including nano photonic devices  

Quasi-3D plasmonic nanostructures consisting of a metallic film perforated as an array of nanoholes, separated by a gap from a nanodisk array, are theoretically investigated under plane wave illumination with transverse electric and transverse magnetic polarizations. The results are compared with the results of a simple nanodisk array. A full discussion involving the couplings between plasmon resonance in nanodisks, surface plasmon polaritons on the interfaces of metallic film, and different diffractive grating orders that contribute in the couplings will be presented. The large difference between the plasmon behavior of the nanodisk array alone and nanodisk array in the presence of nanohole... 

A coupled transmission line model whose parameters are analytically given is provided for fast and accurate analysis of miscellaneous plasmonic structures with metal-dielectric-metal (MDM) arrangement. The coupling of surface plasmons supported by the planar metal-dielectric interfaces is included in the proposed model and thereby the effects of the first non-principal mode of the MDM waveguide are considered. In particular, MDM bends, junctions, and stubs are studied. Using rigorous numerical solutions, e.g., the finite-element method and the finite-difference time-domain, it is shown that the proposed model is accurate in all those cases  

Bluetooth headsets are one of the popular accessories of mobile phones because of their convenience. It is necessary to assess the impact of electromagnetic waves on the human head when a person is using a headset. In this paper different scenarios closely modeling the situations that a subject may use the headset in real life are simulated. Simulations are performed for two types of materials commonly used to manufacture the headsets, namely silicone and acetal, and for two different orientation angle of the headset on the ear. Specific Absorption Rate (SAR) and path loss values are then obtained for two different environments, the open space and inside a car. SEMCAD-X software is used as a... 

We analyze the interaction of a propagating guided electromagnetic wave with a quantum well embedded in a dielectric slab waveguide. First, we design a quantum well based on InAlGaAs compounds with the transition energy of 0.8 eV corresponding to a wavelength of 1.55 μm. By exploiting the envelope function approximation, we derive the eigenstates of electrons and holes and the transition dipole moments. Next, we calculate the electrical susceptibility of a three-level quantum system (as a model for the 2-D electron gas trapped in the waveguide), by using phenomenological optical Bloch equations. We show that the 2-D electron gas behaves as a conducting interface, whose conductivity can be... 

Here, an in-depth study of a novel electro-optic phenomenon suggested earlier in optical waveguides, referred to as the conducting interfaces, is carried out. It is shown that it would be possible to achieve a very strong optical modulation effect in slab waveguides fabricated on the standard III-V InAlGaAs compound platform. The electro-optic effect is obtained by controlling the density and population of the electron and hole states in the well layer. The additional phase shift contributed to the reflection phase of the guided electromagnetic wave constitutes an ultrastrong source of optical modulation and phase control. It is estimated that a Mach-Zhender configuration based on this... 

In this paper we have studied both DC size effect and anomalous skin effect caused by surface and grain boundary scattering on the resistivity of Cu thin films by a Monte Carlo method. Contribution of each scattering mechanism and the interaction between them are analyzed separately. A simple and fast numerical recursive method is also introduced to guess the structure of electric field and distribution of current inside the thin film to evaluate the surface resistance instead of complicated analytical formulas  

An ultrabroadband power amplifier using 16-way spatial power divider/combiner that using a quasi-TEM-guided wave structure is designed. An oversized coaxial waveguide was used as the host of the dividing/combining circuits that incorporates an antipodal finline array. Galerkin's technique in the spectral domain was used to analyze the antipodal finline. The oversized TEM-guided wave structure and antipodal transitions were designed using the theory of small reflection and near optimum design. A high power amplifier using 16 monolithic-microwave integrated-circuit power amplifiers is built. The measured results show 160% bandwidth impedance match covering the entire 2-18 GHz with maximum... 

The electromagnetic wave propagation prediction in smooth homogenous earth is studied. This estimation employs Fourier Split-Step algorithm. The process of how parabolic equation and Fourier Split Step algorithm achieved, is investigated. Error resulted from this approximation is studied. Source modeling is analyzed. Simulations based on this method are illustrated on different values of frequency, range and antenna height  

Terahertz radiation of the stack of intrinsic Josephson junctions in the mesa structure of the layered high- T c superconductors is analyzed and presented in this paper. The dependence of the radiated power to the geometrical parameters, cavity-waveguide boundaries, and magnetic and electric biases has been investigated. This has been done by numerical calculation of the previously proposed coupled sine-Gordon equations, which characterize the electromagnetic dynamics of the stack of the intrinsic Josephson junctions. Using the obtained numerical results from these coupled equations, the effect of the design parameters, such as dimensions of the mesa structure, the magnitude of the applied... 

Ultrafine particles of paracetamol were produced by Rapid Expansion of Supercritical Solution (RESS). The experiments were conducted to investigate the effects of extraction temperature (313353K), extraction pressure (1018MPa), preexpansion temperature (363403K), and postexpansion temperature (273323 K) on particles size and morphology of paracetamol particles. The characterization of the particles was determined by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and Liquid Chromatography/Mass Spectrometry (LC-MS) analysis. The average particle size of the original paracetamol was 20.8m, while the average particle size of paracetamol after nanonization via the... 

A simple and efficient transmission line model is proposed here to study how the transmission characteristics of photonic crystal waveguides are tailored by introduction of stubs patterned in the photonic crystal lattice. It is shown that band-pass and band-stop optical filters can be easily designed and optimized when stubs of appropriate length are brought in. Since the lengths of the designed stubs are not necessarily integer multiples of the photonic crystal lattice constant, a geometric shift in a portion of the photonic crystal structure is shown to be essential. The proposed model is verified by using a rigorous numerical method. An excellent agreement is observed between the...