Sharif Digital Repository

In this study amount of soil erosion in watershed of JAJROOD is estimated by use of the RULSE model with the help of GIS12. JAJROOD River is located in upstream of LATIAN Dam and is one of the most important water sources of Tehran. Also, this River has a big role in preventing the flood. modeling Results show that the amount of soil erosion is high due to high slope of the land, lack of plant coverage and the quality of soil and changing the land application, lead to increase in erosion potential. modeling Results have estimated the amount of erosion in this basin about 1,524,511 tons in a year. In order to evaluate Results and efficiency of the model, all of obtained results are compared... 

This study investigates critical run-off and sediment production sources in a forested Kasilian watershed located in northern Iran. The Water Erosion Prediction Project (WEPP) watershed model was set up to simulate the run-off and sediment yields. WEPP was calibrated and validated against measured rainfall-run-off-sediment data. Results showed that simulated run-off and sediment yields of the watershed were in agreement with the measured data for the calibration and validation periods. While low and medium values of run-off and sediment yields were adequately simulated by the WEPP model, high run-off and sediment yield values were underestimated. Performance of the model was evaluated as... 

The grain-size distribution (GSD) of porous rocks is important in order to better understand their hydrodynamic behavior. Clear and precise GSD data can be used to computationally reconstruct rock structure for further analysis. In this study, three main algorithms for image analysis have been examined to estimate the GSD of clastic rocks. The main challenge in GSD determination from images is in detecting overlapping grains and measuring their size separately. In this study, three previously developed image processing algorithms are implemented on two-dimensional (2D) binary images of rocks in order to compare the obtained GSD from each of the methods, i.e., the mean intercept length... 

Industrial air pollution from point and nonpoint sources of steel complexes has drawn increasingly more public attention in the past decades. Previous research efforts have been more concentrated on point sources of particulate emissions from these complexes. However, wind-induced particulate emissions from iron ore storage piles not only result in ambient air pollution but also increase economic adverse effects to the industry by loss of process raw materials. Experiments were conducted to assess the impact of wind speed and humidity on particulate emission rates from iron ore storage piles. A wind-generating system and specific iron ore, experimental piles (L:W:H of 30:11.5:5 cm) were... 

A better performance and consequently the widespread use of polymeric insulators in different parts of the power grid can increase their role in the grid reliability. The accumulation of contamination and housing-erosion are the two most effective factors in undermining the performance of this type of insulators. Therefore, electric utilities need to identify contaminated insulators for washing and cracks in polymeric housing to replace them with healthy specimens. This paper discusses the impact of contamination layer and housing-erosion of polymeric insulators on the partial discharges (PD) at the insulator surface, through RF-PRPD (phase resolved partial discharge) patterns. The existence... 

The present study examined the effect of nanoparticle size and geometry on filter cake buildup during dynamic filtration using experimental and modeling approaches. A dynamic filtration setup was proposed and designed to test cross-flow circulation against a synthetic core at a constant differential pressure. The proposed mathematical model considers the critical deposition boundary of the porous media for particles along with drag, lift, friction, buoyancy, permeate, and electrostatic forces. The comprehensive model response allowed investigation of the aggregation and shape of nanoparticles at different cross-flow inclinations. The drag and lift force coefficients and moment of inertia of... 

According to available information and references, water leakage and internal erosion in bodies and foundations of embankment dams are the main reasons of many problems and failures. To reduce this risk in foundation, plastic cut off walls is one of the most reliable solutions. In this research the effect of specimen's age on the mechanical properties of plastic concrete was studied. This paper summarizes the test results which were conducted in unconfined and triaxial state. Plastic concrete specimens were prepared in the laboratory condition using the materials provided from the Silve dam site. Test results have shown that the time and confining pressure extremely affect the mechanical... 

In this study, effects of tungsten on wear resistance of high chromium white cast iron with and without tungsten in erosion-corrosion condition have been investigated. At the same time, the comparison between wear resistance of this grade of cast iron and low alloy steels with various contents of Cr which are used in industrial condition (in Sarcheshme Company, the greatest copper production company in the Middle East and with more than 4000 years historical cupper production background) was studied, while, copper concentrates have used for erosion particles. Results show that, because of higher hardness of matrix due to the tungsten, the wear resistance of high chromium cast iron increases.... 

The process of local scour around bridge piers is fundamentally complex due to the three-dimensional flow patterns interacting with bed materials. For geotechnical and economical reasons, multiple pile bridge piers have become more and more popular in bridge design. Although many studies have been carried out to develop relationships for the maximum scour depth at pile groups under clear-water scour condition, existing methods do not always produce reasonable results for scour predictions. It is partly due to the complexity of the phenomenon involved and partly because of limitations of the traditional analytical tool of statistical regression. This paper addresses the latter part and... 

In the present paper, the effect of Nano silica on mechanical properties and durability of concrete containing polypropylene fibers has been investigated. Here, the length and length to diameter ratio of used polypropylene fibers were considered to be fixed and equal to 18 mm and 600 respectively and the cement content was 479 kg/m3. The effect of fibers and Nano silica in four different percentages for each one at 0.1, 0.2, 0.3 and 0.4 percent by volume for fibers and 3 percent for Nano silica in concrete with water to cement ratio of 0.33, 0.36, 0.4, 0.44 and 0.5 have been compared and evaluated. In total, more than 425 cubic and cylindrical specimens were made according to ASTM standards.... 

Ni-base superalloy René 80 is widely used in manufacturing aircraft turbine blades. The service temperature of this alloy is in the range of 760-982 °C. Although this alloy possesses suitable mechanical, oxidation and hot corrosion properties, it is coated in order to increase its wear, oxidation, erosion and hot corrosion properties against harmful environmental service conditions. In this paper the influence of applying diffusion coating (CODEP-B) on the tensile properties of René 80 has been studied in the temperature range of 22-982 °C. Experimental results show that the tensile properties of the coated specimens are relatively lower than that of uncoated ones in the same conditions. But... 

Accurate estimation of scour depth is needed for economic and safe determination of bridge pier foundation depth. Most design criteria are based on maximum scour depth due to the steady design discharge without flow time limit. In this paper, the results are presented of an experimental investigation on local scouring around a single bridge pier under steady and unsteady flow regimes. For unsteady flow, triangular shape hydrographs with repeatable peaks have been chosen. Results show that both sharp and flat increases to the peak of hydrographs have a negligible effect on scour depth for the same base time. An equation is obtained to compute the scour depth due to a specific triangular... 

Wall thickness measurement and deterioration determination of 6 and 10 inch pipes due to corrosion/erosion/pitting was evaluated by using radiographic film density measurements. Special reference blocks were prepared with defined step wall reductions and artificial defects. Gamma radiography with a Ir-192 source was used. A double-wall technique with longitudinal film arrangement was used for this purpose. Formulae were developed from the experiments for numerical calculations. It was observed that this method can determine remaining wall thickness as well as pitting corrosion in insulated and non-insulated pipes with differential and absolute density measurements. The purpose of the work... 

High bed-shear stress resulting from secondary flows and velocity increase at a channel junction cause local erosion and deposition in natural rivers and earth-lined channels. Herein, the scour patterns at the junction of two loose bed channels were studied under clear-water conditions. The main dimensionless variables are the angle between the two approach flow branches, the discharge and width ratios of the tributary to the downstream channel branches, and the ratio of the mean downstream velocity to the threshold velocity. The results indicate that the position of the maximum scour depth temporally moves to the outer wall and upstream to the main channel, as affected by the dimensionless... 

The present study investigates the dynamic filtration of concentrated slurry fluids containing colloidal clay particles under different salinity, shear flow, and flux rate conditions. The dynamic filtration study was carried out by the filtration cell equipped with a rotating disk to apply shear stress over the membrane surface. A 3D CFD simulation has been implemented to model the hydrodynamic flows inside the filtration cell to obtain the wall shear stress (WSS) on the membrane surface at different disk rotation speeds. The thickness and surface patterns of fouling were captured utilizing a surface profilometer. First, the cake-filtration model was used to predict the flux rate and fouling... 

During oil and gas well drilling, the filtration control of bentonite water-based drilling fluids (BT-WBDFs), as an environmentally friendly fluid, is crucial to avoid formation damage and swelling shale problems. One of the most critical problems is undesirable changes in the rheology and filtration properties of the BT-WBDFs because of salt contamination. Herein, the potential of using both graphene oxide (GO) nanosheets and a graphene oxide-polyacrylamide (GO-PAM) nanocomposite is evaluated for controlling the filtration properties, especially in a salty medium. First, GO nanosheets were functionalized, and then the GO-PAM nanocomposite was synthesized using the solution polymerization... 

Mechanical failure of materials adjacent to the production cavity and material disaggregation caused by fluid drag are considered as the most important parameters that affect sand production. In light of such factors, the coupling of two mechanisms-mechanical instability and hydrodynamic erosion-is indispensable in order to model this phenomenon successfully. This paper examines the applicability of a coupled hydro-mechanical erosion criterion for simulating sand production using the finite element method. The porous medium was considered fully saturated. The onset of sanding and production of sand were predicted by coupling mechanical failure and subsequent erosion of the grain particles... 

This paper introduces the concept of a submerged hydraulic jump being used for energy dissipation. A baffle wall is used to produce a stable deflected surface jet, thereby deflecting the high-velocity supercritical stream away from the bed to the surface. An elliptic relaxation turbulence model (v 2̄ - f model) has been used to simulate this submerged flow. During the last few years, the v2̄ - f turbulence model has become increasingly popular due to its ability to account for near-wall damping without use of damping functions. In addition, it has been proved that the v̄2 - f model is superior to other RANS methods in many fluid flows where complex flow features are present. In this study,... 

In this paper, the structure of a wall jet deflected by a baffle along with the trajectory of particles has been studied. This baffle is used to produce a stable deflected surface jet, thereby deflecting the high-velocity supercritical stream away from the bed to the surface. An elliptic relaxation turbulence model (v2̄ - f model) has been used to simulate this submerged flow. During the last few years, the v2̄ - f turbulence model has become increasingly popular due to its ability to account for near-wall damping without use of damping functions. In addition, it has been proven that the v2̄ - f model is superior to other RANS methods in many fluid flows where complex flow features are... 

In this paper, the structure of a wall jet deflected by a baffle along with the trajectory of particles has been studied. This baffle is used to produce a stable deflected surface jet, thereby deflecting the high-velocity supercritical stream away from the bed to the surface. An elliptic relaxation turbulence model (ν̄2-f model) has been used to simulate this submerged flow. In recent years, the ν̄2- f turbulence model has become increasingly popular due to its ability to account for near-wall damping without use of damping functions. In addition, it has been proven that the ν̄2- f model is superior to other Reynolds-averaged Navier-Stokes (RANS) methods in many flows where complex flow...