Sharif Digital Repository

A chemiresistive sensor is described for the lung cancer biomarker hexanal. A composite consisting of molecularly imprinted polymer nanoparticles and multiwalled carbon nanotubes was used in the sensor that is typically operated at a voltage of 4 V and is capable of selectively sensing gaseous hexanal at room temperature. It works in the 10 to 200 ppm concentration range and has a 10 ppm detection limit (at S/N = 3). The sensor signal recovers to a value close to its starting value without the need for heating even after exposure to relatively high levels of hexanal  

The room temperature polar vapor sensing behavior of a graphene-TiS3 heterojunction material and TiS3 nanoribbons is described. The nanoribbons were synthesized via chemical vapor transport (CVT) and their structure was investigated by scanning electron microscopy, high resolution transmission electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, Raman and Fourier transform infrared spectroscopies. The gas sensing performance was assessed by following the changes in their resistivities. Sensing devices were fabricated with gold contacts and with lithographically patterned graphene (Gr) electrodes in a heterojunction Gr-TiS3-Gr. The gold contacted TiS3 device has a... 

Graphene nanoribbons (GNRs) fabricated using electron beam lithography are investigated using tip-enhanced Raman spectroscopy (TERS) with a spatial resolution of 5 nm under ambient conditions. High-resolution TERS imaging reveals a structurally modified 5-10 nm strip of disordered graphene at the edge of the GNRs. Furthermore, hyperspectral TERS imaging discovers the presence of nanoscale organic contaminants on the GNRs. These results pave the way for nanoscale chemical and structural characterisation of graphene-based devices using TERS. © The Royal Society of Chemistry 2021  

Decoding behavioral aspects associated with the water molecules in confined spaces such as an interlayer space of two-dimensional nanosheets is key for the fundamental understanding of water-matter interactions and identifying unexpected phenomena of water molecules in chemistry and physics. Although numerous studies have been conducted on the behavior of water molecules in confined spaces, their reach stops at the properties of the planar ice-like formation, where van der Waals interactions are the predominant interactions and many questions on the confined space such as the possibility of electron exchange and excitation state remain unsettled. We used density functional theory and... 

Ion-exchange membrane-based reverse electrodialysis (RED) shows great potential for harvesting osmotic energy from seawater and converting it to electricity. However, their low energy conversion efficiency and huge ionic resistance hinder their application on large scales. The implementation of nanofluidic channels in RED devices can significantly improve the performance of osmotic power generators due to their selective and fast ion transport. However, technical challenges in scalable processing at the nanoscale and ion-selective membranes restrict their development in economically viable generators. Here, we report fibrous-based channels as positively and negatively charged MXene fibers... 

Synthesizing efficient electrode materials for water splitting and supercapacitors is essential for developing clean electrochemical energy conversion/storage devices. In the present work, we report the construction of a ruthenium cobalt oxide (RuCo2O4)/Ti3C2Tx MXene hybrid by electrophoretic deposition of Ti3C2Tx MXene on nickel foam (NF) followed by RuCo2O4 nanostructure growth through an electrodeposition process. Owing to the strong interactions between RuCo2O4 and Ti3C2Tx sheets, which are verified by density functional theory (DFT)-based simulations, RuCo2O4/Ti3C2Tx MXene@NF can serve as a bifunctional electrode for both water splitting and supercapacitor applications. This electrode... 

Two-dimensional (2D) transition metal dichalcogenides are promising candidates of photodetectors where they are commonly grown parallel to the substrate due to their 2D characteristics in micrometer scales from exfoliation of bulk crystals or through high temperature chemical vapor deposition (CVD) methods. In this study, semi-hexagonal vertical nanosheets of SnS2 layered have been fabricated on FTO substrate without using Sn source through CVD method at relatively low temperature (500 °C). Due to exceptional band alignment of triple cation lead perovskite (TCLP) with semi-hexagonal SnS2 nanosheets, an improved photodetector has been fabricated. This type of photodetectors fabricated through... 

Gas permeation through nanoscale pores is ubiquitous in nature and has an important role in many technologies 1,2 . Because the pore size is typically smaller than the mean free path of gas molecules, the flow of the gas molecules is conventionally described by Knudsen theory, which assumes diffuse reflection (random-angle scattering) at confining walls 3-7 . This assumption holds surprisingly well in experiments, with only a few cases of partially specular (mirror-like) reflection known 5,8-11 . Here we report gas transport through ångström-scale channels with atomically flat walls 12,13 and show that surface scattering can be either diffuse or specular, depending on the fine details of the... 

Due to the favorable properties of two-dimensional materials such as SnS2, with an energy gap in the visible light spectrum, and InSe, with high electron mobility, the combination of them can create a novel platform for electronic and optical devices. Herein, we study a tunable gain SnS2/InSe Van der Waals heterostructure photodetector. SnS2 crystals were synthesized by chemical vapor transport method and characterized using X-ray diffraction and Raman spectroscopy. The exfoliated SnS2 and InSe layers were transferred on the substrate. This photodetector presents photoresponsivity from 14 mA/W up to 740 mA/W and detectivity from 2.2 × 108 Jones up to 3.35 × 109 Jones by gate modulation from... 

In this study, graphene oxide fibers are introduced as new graphene oxide (GO) membranes with the capability of ion selectivity. Graphene oxide fibers, like other macro structured membranes, are always associated with cavities and defects. To solve this problem, a 50% combination of graphene oxide suspension including small sheets with an average size of ~ 0.5 µm2 and large sheets with an area of more than 10 µm2 was used. According to the morphological results of scanning electron microscopy, as well as the amount of ionic transport through the fiber, reduction of cavities and its defects were confirmed. Moreover, it was found that ionic current through fibers consist of large and small GO... 

Enhancing the photoresponse of single-layered semiconductor materials is a challenge for high-performance photodetectors due to atomically thickness and limited quantum efficiency of these devices. Band engineering in heterostructure of transition metal chalcogenides (TMDs) can sort out part of this challenge. Here, we address this issue by utilizing the plasmonics phenomenon to enrich the optoelectronics property of the WSe2/MoS2 heterojunction and further enhancement of photoresponse. The introduced approach presents a contamination-free, tunable and efficient way to improve light interactions with heterojunction devices. The results showed a 3600-fold enhancement in photoresponsivity and... 

Nanostructured graphene based membranes demonstrated excellent capabilities in various applications in nanofiltration and energy conversion due to unique atomically smooth surfaces and adjustable pore size or interlayers spacing at Angstrom scales. There are some reports on the osmotic power generation using physical confinements and electrostatic interactions between ions and GO membranes. However, the results indicated insufficient power densities (˂1 W/m2) can be achieved because of swelling of interlayer spacing of the GO membranes upon exposure to aqueous solutions which results in reducing the influence of confinement on ionic motilities. Here, the GO fibers is presented as one... 

Synthesis of efficient, low-cost, and stable bifunctional electrocatalysts with earth-abundant resources for electrochemical water electrolysis is a challenging subject for large-scale energy conversion processes. Herein, we report a high-performance electrocatalyst based on vanadium oxysulfide/cobalt-cobalt sulfonitride (VOS/Co-CoSN) for oxygen and hydrogen evolution reaction (OER and HER). The Co-CoSN film was synthesized on a copper sheet (CS) by a facile electrodeposition method. Then, VOS was electrochemically grown onto the Co-CoSN@CS electrode at various deposition times. At the optimal deposition time (300 s), the obtained VOS-300/Co-CoSN catalyst was studied for OER and HER in... 

The development of electrode materials with simple preparation, favorable price, excellent electrocatalytic activity, and stability are some of the most important issues in the field of electrochemistry. Herein, we prepared Ni–Co/Ni–Co–O–P cotton flower like on a copper sheet (CS) by a convenient, efficient, and scalable electrodeposition method. The Ni–Co/Ni–Co–O–P was employed as effective binder free electrode material in two different applications such as electrocatalytic water splitting and acetaminophen (APAP) sensor. Remarkably, the Ni–Co/Ni–Co–O–P@CS exhibits low overpotentials of 310 and 90 mV at 10 mA cm−2 for oxygen and hydrogen evolution reactions in alkaline media, respectively.... 

Efficient utilization of solar energy as the cleanest and most plentiful natural resource for drinking water is a water is as sustianble and environmental friendly approach to obviate long-standing water scarcity. Carbon-based photothermal absorbers due to broadband light absorption are very interesting in interfacial solar steam generation systems. Herein, we investigate the convenient application of reduced graphene oxide (rGO) nanosheets with carbon black (CB) nanoparticles on the cotton fabric as a flexible texture-based photothermal absorber. Polyurethane (PU) as a self-floating insulator foam was selected to manage the energy loss and preserve light converted to heat on the fabric... 

Hematite (α-Fe2O3) is a promising candidate for water oxidation applications due to its abundance in the earth crust and its suitable bandgap. However, hematite performance is severely limited by electron-hole recombination at its interface with the electrolyte; something that can be addressed using electrocatalysts. In this report, we evaluate the influence of a ternary NiFeCo co-catalyst to enhance the water oxidation performance of hematite photoanodes. Thus, NiFeCo co-catalyst is optimized for hematite thin films with i) dense and ii) porous (nano-rod) morphologies. Both hematite films are prepared using electron beam evaporation method followed by an annealing step and NiFeCo... 

MXenes have recently witnessed significant evolution and advances in terms of their applications in different areas such as flexible electronics, energy storage devices, and coatings. Here, the mechanical properties of both pristine and functionalized Tin+1CnO2 and Tin+1NnO2 (n = 1, 2) are investigated utilizing classical molecular dynamics simulations. For eight different MXene structures, the stress-strain curves are calculated including Young's modulus, strength, and fracture strain. It is found that Ti2N holds the highest Young's modulus with the value of 517 GPa while Ti3C2 has the lowest one with the amount of 133 GPa. In addition, the strongest MXene structure is Ti2N while the... 

There is a long-standing question about the molecular configuration of interfacial water molecules in the proximity of solid surfaces, particularly carbon atoms, which plays a crucial role in electrochemistry and biology. In this study, the dielectric, structural, and dynamical properties of confined water placed between two parallel graphene walls at different interdistances from the angstrom scale to a few tens of nanometer have been investigated using molecular dynamics. For the dielectric properties of water, we show that the dielectric constant of the perpendicular component of water drastically decreases under sub-2-nm spatial confinement. The dielectric constant data obtained through... 

There is a long-standing question about the molecular configuration of interfacial water molecules in the proximity of solid surfaces, particularly carbon atoms, which plays a crucial role in electrochemistry and biology. In this study, the dielectric, structural, and dynamical properties of confined water placed between two parallel graphene walls at different interdistances from the angstrom scale to a few tens of nanometer have been investigated using molecular dynamics. For the dielectric properties of water, we show that the dielectric constant of the perpendicular component of water drastically decreases under sub-2-nm spatial confinement. The dielectric constant data obtained through... 

The wide utilization of nanomanipulation as a promising approach in microorganisms, nanoelectromechanical systems, and assembly of nanostructures remarks the importance of nanostructures' motion in electric fields. Here, we study the rotational dynamics of metallic and non-metallic nanowires (NWs) in a static uniform electric field in viscous dielectric liquids. For metallic NWs, it has been theoretically shown that the electric field-induced rotation is practically independent of the geometrical dimensions and the electrical properties of NWs. Our experimental results for suspended silver (Ag) NWs in microscope oil are perfectly in agreement with this model. However, in the case of TiO2...