Sharif Digital Repository

In this paper seven different multiaxial fatigue criteria based on stress, strain and energy were employed to estimate the fatigue lives of double shear lap joint specimens of aluminum 2024-T3 with bolt clamped and interference fitted-bolt clamped fastener holes. Detailed finite element (FE) simulations were conducted to obtain the stress and strain distributions in the joint to be used to as basic data in estimating the fatigue lives using multiaxial fatigue criteria. The estimated lives were compared with available experimental fatigue test results to investigate the capability of the criteria in predicting the fatigue lives. The results showed that the accuracy of life estimation for any... 

Analysis and investigation of the relation between different parts of biological cells such as biomembrane, cytoplasm and nucleus can help to better understand their behaviors and material properties. In this paper, first, the whole elastic properties of mouse oocyte and embryo cells have been computed by inverse finite element and Levenberg-Marquardt optimization algorithm and second, using the derived mechanical properties and the mechanical properties of its bio membrane from the literature, the mechanical properties of its cytoplasm has been characterized. It has been assumed that the cell behavior is as continues, isotropic, nonlinear and homogenous material for modeling. Matching the... 

In order to better understand the mechanical properties of biological cells, characterization and investigation of their material behavior is necessary. In this paper hyperelastic Neo-Hookean material is used to characterize the mechanicalproperties of mouse oocyte cell. It has been assumed that the cell behavior is continues, isotropic, nonlinear and homogenous material. Then, by matching the experimental data with finite element (FE) simulation result and using the LevenbergâMarquardt optimization algorithm, the nonlinear hyperelastic model parameters have been extracted. Experimental data of mouse oocyte captured from literatures. Advantage of the developed model is that it can be used to... 

Forming limit diagrams (FLDs) are extensively used in industries, particularly the auto industry. The establishment of these diagrams using a predictive approach can lead to reduction in both cost and time. In the present work, Gurson-Tvergaard-Needleman (GTN), a porosity-based model, was used to predict the FLD of an interstitial-free steel via finite element simulation. Optimum values of the GTN model were obtained by applying a response surface methodology (RSM) based on central composite design. Results show that RSM is a good method for an appropriate determination of the GTN model parameters, such as initial void volume fraction, effective void volume fraction, critical void volume... 

Flow sensors play a critical role in monitoring flow parameters, including rate, velocity, direction, and rotation frequency. In this paper, inspired by biological hair cells in the human vestibular system, an innovative flow sensor is developed based on polyvinyl alcohol (PVA) hydrogel nanocomposites with a maze-like network of vertically grown graphene nanosheets (VGNs). The VGNs/PVA hydrogel absorbs a copious amount of water when immersed in water, making the sensor highly sensitive to tiny stimuli underwater. The sensor demonstrates a high sensitivity (5.755 mV (mm s−1)−1) and extremely low velocity detection (0.022 mm s−1). It also reveals outstanding performance in detecting... 

Flow sensors play a critical role in monitoring flow parameters, including rate, velocity, direction, and rotation frequency. In this paper, inspired by biological hair cells in the human vestibular system, an innovative flow sensor is developed based on polyvinyl alcohol (PVA) hydrogel nanocomposites with a maze-like network of vertically grown graphene nanosheets (VGNs). The VGNs/PVA hydrogel absorbs a copious amount of water when immersed in water, making the sensor highly sensitive to tiny stimuli underwater. The sensor demonstrates a high sensitivity (5.755 mV (mm s−1)−1) and extremely low velocity detection (0.022 mm s−1). It also reveals outstanding performance in detecting... 

Flow sensors play a critical role in monitoring flow parameters, including rate, velocity, direction, and rotation frequency. In this paper, inspired by biological hair cells in the human vestibular system, an innovative flow sensor is developed based on polyvinyl alcohol (PVA) hydrogel nanocomposites with a maze-like network of vertically grown graphene nanosheets (VGNs). The VGNs/PVA hydrogel absorbs a copious amount of water when immersed in water, making the sensor highly sensitive to tiny stimuli underwater. The sensor demonstrates a high sensitivity (5.755 mV (mm s−1)−1) and extremely low velocity detection (0.022 mm s−1). It also reveals outstanding performance in detecting... 

In this paper, the fluid-structure interaction problem in mechanical systems in which a high frequency vibrating solid structure interacts with the surrounding fluid flow is considered. Such a situation normally appears in many microelectromechanical systems like a wide variety of microfluidic devices. A different implementation of the residual-based variational multiscale flow method is employed within the arbitrary Lagrangian-Eulerian formulation. The combination of the variational multiscale method with appropriate stabilization parameters is used to handle the so-called small time step instability in the finite element analysis of the fluid part in the coupled fluid-structure interaction... 

In this paper, the so-called small time-step instability in finite element simulation of the fluid part is considered in fluid-structure interaction (FSI) problems in which a high-frequency vibrating structure interacts with an incompressible fluid. Such a situation is common in many microfluid manipulating devices. A treatment has been proposed that uses the dimensionless set of FSI governing equations in order to scale up the problem time step to a proper level that precludes the potential small time-step instability. Two-dimensional and three-dimensional finite element simulations of a mechanical micropumping device are performed to verify the efficiency of the presented approach. Solid... 

A new design for a valveless micropumping device has been proposed that integrates two existing pumping technologies, namely, the wall induced traveling wave and the obstacle-type valveless micropump. The liquid in the microchannel is transported by generating a traveling wave on the channel, while the placing of two asymmetric trapezoid obstacles, along the centerline of the channel inlet and outlet, leads to a significant (up to seven times) increase of the net flow rate of the device. The effectiveness of this innovative design has been proved through a verified three-dimensional finite element model. FluidStructure Interaction (FSI) analysis is performed in the framework of an Arbitrary... 

Today, structural Health monitoring is a major concern in the engineering community. Multisite fatigue damage, hidden cracks and corrosion in hard-to-reach locations are among the major flaws encountered in today's extensive diagnosis and/or prognosis of aircraft structures. Ultrasonic waves, lamb waves are particularly advantageous because of their propagation at large distances with little damp in thin-wall structures. In this paper a new rectangular shape array of embedded piezoelectric sensors is developed to detect some damages in large planar structures. An artificial neural network is trained to identify the damage state and its location. Output signals of each sensor due to various... 

Rapid prototyping is a promising technique for producing tissue engineering scaffolds due to its capacity to generate predetermined forms and structures featuring distinct pore architectures. The objective of this study is to investigate the influences of different pore geometries and their orientation with respect to the compressive loading direction on mechanical responses of scaffolds. Plastic models of scaffolds with cubic and hexagonal unit cells were fabricated by three-dimensional (3-D) printing. An in situ imaging technique was utilized to study the progressive compressive deformation of the scaffold models. In both cubic and hexagonal geometries, organized buckling patterns relevant... 

The theoretical need to recognize the link between the basic microstructure of nonlinear porous materials and their macroscopic mechanical behavior is continuously rising owing to the existing engineering applications. In this regard, a semi-analytical homogenization model is proposed to establish an overall, continuum-level constitutive law for nonlinear elastic materials containing prolate/oblate spheroidal voids undergoing finite axisymmetric deformations. The microgeometry of the porous materials is taken to be voided spheroid assemblage consisting of confocally voided spheroids of all sizes having the same orientation. Following a kinematically admissible deformation field for a... 

In the present paper, an optimization of thermal barrier coating parameters is performed for diesel engine applications. The substrate is A356.0-T7, a cast aluminum alloy which has a vast application in diesel engines, and the alloy is coated by plasma sprayed ZrO2-8 wt.% Y2O3. Parameters including the feed rate of coating powders, the nozzle distance to specimen surfaces, and the coating thickness are optimized by thermal shock fatigue tests and bending tests. Optimum values of the feed rate and the nozzle distance are 30 g/min and 80 mm, respectively, when the objective is considered as maximizing the bending strength. Thermal shock tests demonstrate that lower thickness of coating layers... 

Microfluidic devices have been widely used for biological and cellular studies. Microbioreactors for three-dimensional (3D) multicellular spheroid culture are now considered as the next generation in in vitro diagnostic tools. The feasibility of using 3D cell aggregates to form multicellular spheroids in a microbioreactor with U-shaped barriers has been demonstrated experimentally. A barrier array is an alternative to commonly used microwell traps. The present study investigates oxygen and glucose concentration distributions as key parameters in a U-shaped array microbioreactor using finite element simulation. The effect of spheroid diameter, inlet concentration and flow rate of the medium... 

The current paper presents a two degree of freedom model for the problem of micromirrors under capillary force. The principal of minimum potential energy is employed for finding the equilibrium equations governing the deflection and the rotation of the micromirror. Then, using the implicit function theorem, a coupled bending-torsion model is presented for pull-in characteristics of micromirrors under capillary force and the concept of instability mode is introduced. It is observed that with increasing ratio of bending and torsion stiffness, the dominant instability mode changes from bending mode to the torsion mode. In order to verify the accuracy of the coupled model, static behavior of a... 

Gonbad-e Qabus, with a height of 52.8 m that makes it the tallest pure-brick tower in the world, located in the northern part of Iran, represents one of the most magnificent structures of the early Islamic centuries. This structure is still standing among the chaos of urban life and construction, catching the eyes of beholders even from far distances. This paper summarizes the historical and architectural background of this monumental structure and the important restorations carried out mainly in the past century. Various types of existing and potential structural and architectural damages are classified and elaborated in detail, and for each problem, a series of proposed solutions are... 

Although iron-cored superconducting machine has been recently proposed in many papers for its advantages over conventional air-cored structure such as less cost and less perpendicular magnetic component on HTS tapes it has not been studied analytically yet. This paper analytically investigates a general model for iron-cored superconducting synchronous machine. In this paper, analytical equations for magnetic flux in different regions of machine have been proposed along with an algorithm to solve the equations. The analytical equations will be then used to optimize the thickness of rotor iron in order to maximize the machine power density. Analytical and finite element simulation results will... 

Residual stresses, created in a steel beam by elastic-plastic bending, are predicted using an approximate analysis and the finite element method. The predictions are compared to experimental measurements obtained from the application of incremental centre hole drilling, deep hole drilling and neutron diffraction methods. Finite element simulations of the incremental centre hole drilling and deep hole drilling methods applied to the predicted residual stresses permitted an assessment of their ability to reconstruct the stresses. An analytical reconstruction analysis using an Airy stress function together with boundary and equilibrium conditions is developed and applied to the predictions and... 

Assessment of mechanical properties of glass/metal joints is a challenging process, especially when the application relevant conditions of the joints have to be considered in the test design. In this study, a finite element method (FEM) is implemented to analyze a torsional shear strength test designed for glass-ceramic/steel joints aiming towards solid oxide fuel/electrolysis cells application. Deviations from axial symmetry of the square flanges (ends) of respective hourglass-shaped specimens and also supporting and loading sockets of the test set-up are included in the model to simulate conditions close to reality. Undesirable tensile stress and also shear stress concentration appear at...