Sharif Digital Repository

Rotating dissolved air flotation (RDAF) has been utilized for several decades in paper-recycling wastewater treatment; however, it has rarely been addressed in the literature, which makes research into this system challenging and complicated. However, in this work, a full-scale industrial wastewater treatment system for a paper-recycling mill in Mazandaran province, Iran, was evaluated. Experiments indicated that under the same wastewater and chemical conditions, there are differences in the removal efficiencies. This finding was investigated by conducting simulation in ANSYS CFX R18.0 and experimentation simultaneously. Thus, the main purpose of this research was to optimize the operation... 

Asphaltene deposition during enhanced oil recovery (EOR) processes is one of the most problematic challenges in the petroleum industry, potentially resulting in flow blockage. Our understanding of the deposition mechanism with emphasis on the rate of the asphaltene deposition is still in its infancy and must be developed through a range of experiments and modelling studies. This study aims to investigate the rate of asphaltene deposition through a visual study under different gas injection scenarios. To visualise the asphaltene deposition, a high-pressure setup was designed and constructed, which enables us to record high-quality images of the deposition process over time. Present research... 

Non-Volatile Memory (NVM) technology is a promising solution to fulfill the ever-growing need for higher capacity in the main memory of modern systems. Despite having many great features, however, NVM's poor write performance remains a severe obstacle, preventing it from being used as a DRAM alternative in the main memory. Most of the prior work targeted optimizing writes at the main memory side and neglected the decisive role of upper-level cache management policies on reducing the number of writes. In this article, we propose a novel cache management policy that attempts to maximize write-coalescing in the on-chip SRAM last-level cache (LLC) for the sake of reducing the number of costly... 

Asphaltene which cover range of 1% to over 10% of oil by weight, is well-known as most problematic part of oil that can deposit during production in reservoir, well tubing, and surface production lines, and consequently impose a serious restriction on production which in turn increases total cost of entire operation. Through decades an extensive research has been performed in order to identify asphaltene molecular structure, its behavior at different condition, and its separation mechanism from oil. One of most critical parameter associated with asphaltene precipitation modeling is flocculated asphaltene weight percentage in oil at given operation condition. In this study, to eliminate cost... 

In this study, asphaltene deposition from crude oil has been studied experimentally using a test loop and prediction using theoretical study under turbulent flow (Reynolds numbers below 5000). The effects of many parameters such as oil velocity, surface temperature and concentration of flocculated asphaltene on the asphaltene deposition were investigated. The results showed that asphaltene deposition thickness increases with increasing both surface temperature and concentration of flocculated asphaltene and decreasing oil velocity. Thermal approach was used to describe the mechanisms involved in this process and the results of data fitting showed that there are good agreements between the... 

In this work, the electrokinetic properties of asphaltene particles have been investigated. Micro-electrophoresis method by applying DC electric field, was utilized to different mixtures containing asphaltene to determine its electric charge. It was observed that in the case of using n-heptane and its mixture with toluene (heptol), the asphaltene particles were showed to be positively charged however for toluene itself, they expressed no tendency toward the electrodes. While it is expected that larger asphaltene aggregates carry higher electric charge, the results contradictorily showed that they are mainly governed by gravity rather than electro-static force and that “aggregation” reduces... 

This work is concerned with the monitoring of ultrasound effects on inhibition, as well as the reversible kinetics modeling of asphaltene flocculation in toluene-n-alkane systems, which has been rarely reported in the literature. A crude oil sample was exposed to ultrasound waves, and then the colloidal structural evolutions of flocculated asphaltene particles induced by addition of n-alkane were studied, using a confocal microscopy. Observations confirmed that radiation of ultrasound can change the irreversibility of asphaltene flocculation in crude oil. To interpret the kinetics of asphaltene flock aggregation, the Smoluchowski model was used, and the time dependent size distribution of... 

A new cationic flocculant was synthesized by graft copolymerization of acrylamide (AM) and 3-(methacryloylamino)propyl]trimethylammonium chloride (MAPTAC) onto salep using free radical polymerization initiated by ammonium persulfate (APS) to produce cationic salep [S-g-P(AM-co-MAPTAC)]. Reaction parameters (monomers/salep ratio, concentration of reactants, MAPTAC/AM ratio, and APS) were optimized using a full factorial experimental design to obtain the highest settling rate for cement suspensions. The best performing product was characterized by gel permeation chromatography (GPC), FTIR, 1H NMR spectroscopy, and thermogravimetric analysis (TGA). The resulted cationic flocculant may be... 

In this study, it is aimed to compare the efficiency of ultrasonic wave technology on asphaltene flocculation inhibition of crude oils with different American Petroleum Institute (API) gravities. A set of confocal microscopy test is performed and a series of statistical analysis is done. According to the results of this study, there is an optimum radiation time for both crudes at which the viscosity and the flocculation rate of asphaltenic crude oils reduces to its minimum. This optimum appears at later times of radiation for extra heavy oil. Also, it is shown that the rate of changes in the properties measured in this study is sharper for extra heavy crude oil. It could be concluded that... 

In this work, the rheological changes of several crude oil samples exposed to ultrasonic waves for different time intervals in addition to the effect of temperature on viscosity behavior of heavy crude oils were investigated using a series of steady shear flow and oscillatory tests. The colloidal structural evolutions of flocs in oil samples were illustrated by analysis of the size distribution of flocculated asphaltene particles (confocal microscopy tests). The rheological investigations indicate that the ultrasonic irradiation dissolved heavy components in crude oil. After ultrasonic treatment, the Kouh-e-Mond crude oil was found to be pseudoplastic. In addition, confocal microscopy... 

Asphaltene deposition causes serious problems in the oil industry. Variation of oil composition and reservoir pressure is reported to be the most important factors that influence asphaltene deposition from reservoir oil. In this study, a mathematical model was developed to simulate asphaltene deposition during primary depletion and CO2 injection. The main purpose of this study is to investigate and to compare asphaltene deposition mechanisms due to primary depletion and CO2 injection. The solid model as thermodynamic model was applied to investigate asphaltene precipitation. A numerical model was established to the governing equations both in space and time and model parameters were... 

High molecular weight homopolymers of acrylamide (PAM) and (2-methacryloyloxyethyl) trimethyl ammonium chloride (PDMC) and copolymer of DMC with acrylamide (P(AM-co-DMC)) were synthesized using solution polymerization technique. The synthesized polymers were characterized by Fourier transform infrared (FTIR), 1HNMR, 13CNMR spectroscopy and differential scanning calorimetry (DSC) and viscometery. 1HNMR and 13CNMR studies confirmed the structure of the synthesized polymers. The behavior of the synthesized polymers was investigated in water-acetone and water-methanol mixtures. The plot of intrinsic viscosity of either PAM or P(AM-co-DMC) with respect to acetone (methanol)/water ratio in... 

Recently, it was found that ultrasonic wave technology can be used as a method for asphaltene deposits removal from the near wellbore region. However, ultrasounds can affect asphaltene resolution.In this work, asphaltene resolution in several crude oil samples exposed to ultrasonic waves for different time intervals is studied by confocal microscopy. The colloidal structure of flocks is described by analysis of asphaltene particle size distribution to investigate ultrasonic application in solving asphaltene deposition problems.. The results show that for the first 90 minutes of flocculation time, the size of aggregates increases rapidly, and reaction limited aggregation model matches well... 

Asphaltene deposition is one of the unresolved problems in oil industries. Little information is available on the critical question of "how fast" the flocculated asphaltene particles deposit across the production wells from the flowing oil. In this study, the mechanisms of deposition of flocculated asphaltene particles from oil have been studied experimentally and theoretically under forced convective conditions using an accurate thermal approach. The effects of oil velocity, flocculated asphaltene concentration and temperature on the rate of asphaltene deposition are investigated. It is observed that during the first few weeks the deposition mechanism is dominant and the erosion of the... 

This study evaluates the effectiveness of adsorption process by Granular Activated Carbon (GAC) compared with a novel formulation of coagulation - flocculation process for dye removal from textile wastewater. In this regard, acidic, reactive, disperse and direct red dye are used to prepare the synthetic dye. Dominant wave length for each dye is determined by spectrophotometeric method. Using GAC as adsorbent, equilibrium time and adsorption isotherm of each dye are determined with aid of spectrophotometric method. The results show that GAC can not remove dispersed red dye. Acidic red, direct red and reactive red of 5 mg/L concentration are removed by GAC up to %90, %88 and %43 in 30, 60 and... 

The present effort is the development of a multiscale modeling, simulation methodology for investigating complex phenomena arising from flowing fiber suspensions. Specific consideration was given to dynamic simulations of viscoelastic fibers in which the fluid flow is predicted by a method that is a hybrid between Direct Numerical Simulations (DNS) and Large Eddy Simulation techniques (LES), and fluid fibrous structure interactions (FSI) will be taken into account. Numerical results are presented for which focus is on fiber floc deformation by hydrodynamic forces in turbulent flows. Dynamics of simple fiber networks in a shearing flow of water in a channel flow illustrate that the... 

Bacillus sp. As-101 which produces flocculating substances was isolated from activated sludge, using a proteolytic enzyme. Bioflocculant As-101 was partially purified by cold ethanol and cetylpyridinium chloride. The partially purified flocculating substance was an acidic polysaccharide including uronic, pyruvic and acetic acids, respectively, in an approximate ratio of 11.4%, 6.1%, 0.4%. The biopolymer is also a sugar-protein derivative consisting of glucose, mannose and galactose. The protein, the sugar contents ratio is about 83-17%. Bioflocculant As-101 acted under acidic condition and the maximum activity was observed at optimum pH ˜ 3.7 and optimum concentration of 30 ppm in kaolin...