Sharif Digital Repository

We have observed that a rotating liquid soap film generates electricity when placed between two non-contact electrodes with a sufficiently large potential difference. In our experiments, suspended liquid film (water + soap film) is formed on the surface of a circular frame, which is forced to rotate in the x−y horizontal plane by a motor. This system is located at the center of two capacitor-like vertical plates to apply an external electric voltage difference in the x-direction. The produced electric current is collected from the liquid film using two conducting electrodes that are separated in the y-direction. We previously reported that a liquid film in an external electric field rotates... 

The present study considers the free vibration analysis of moderately thick conical shells based on the Novozhilov theory. The higher order governing equations of motion and the associate boundary conditions are obtained for the first time. Using the Frobenius method, exact base solutions are obtained in the form of power series via general recursive relations which can be applied for any arbitrary boundary conditions. The obtained results are compared with the literature and very good agreement (up to 4%) is achieved. A comprehensive parametric study is performed to provide an insight into the variation of the natural frequencies with respect to thickness, semivertex angle, circumferential... 

Flutter of cantilevered, functionally graded cylindrical shells under an end axial follower force is addressed. The material properties are assumed to be graded along the thickness direction according to a simple power law. Using the Hamilton principle, the governing equations of motion are derived based on the first-order shear deformation theory. The stability analysis is carried out using the extended Galerkin method and minimum flutter loads and corresponding circumferential mode numbers are obtained for different volume fractions, length-to-radius, and thicknesses-to-radius ratios. Two different configurations are considered for the FGM: one in which the metal phase is the outer layer... 

This study presents a method to determine an equivalent mechanical model (EMM) for multi-baffled containers with arbitrary geometries. The method is implemented for 2D and axisymmetric containers. The Laplace equation and Green's theorem are used to develop the fluid model and the boundary element method (BEM) is used to solve the fluid field governing equation. Moreover, a zoning method is utilized to model arbitrary arrangements of baffles in multi-baffled containers and a reduced order model is developed to model the free-surface sloshing. The exerted hydrodynamic pressure distribution, forces and moments on the walls of the container are determined based on the Bernoulli equation and a... 

An analytical approach is proposed for studying the elastic-plastic behavior of short fiber reinforced metal matrix composites under tensile loading. In the proposed method, a micromechanical approach is employed, considering an axi-symmetric unit cell including one fiber and the surrounding matrix. First, the governing equations and the boundary conditions are derived and the elastic solution is obtained based on some shear lag type methods. A plastic deformation is considered for the matrix under each small tensile loading step. Then, applying the successive elastic solutions method, all the plastic strain terms are obtained for the matrix. Thereafter, the elastic-plastic stress transfer... 

In this paper a new continuous model for flexural vibration of rotors with an open edge crack has been developed. The cracked rotor is considered in the rotating coordinate system attached to it. Therefore, the rotor bending can be decomposed in two perpendicular directions. Two quasi-linear displacement fields are assumed for these two directions and the strain and stress fields are calculated in each direction. Then the final displacement and stress fields are obtained by composing the displacement and stress fields in the two directions. The governing equation of motion for the rotor has been obtained using the Hamilton principle and solved using a modified Galerkin method. The free... 

The fully developed longitudinal slip-flow mixed convection between a periodic bunch of vertical microcylinders arrangedin regular arraysis investigated inthe present work. The two axially constant heat flux boundary conditions of H1 and H2 are considered in the analysis. The rarefaction effects are taken into consideration using first-order slip velocity and temperature jump boundary conditions. The method considered is mainly analytical, in that the governing equations and three of the boundary conditions are exactly satisfied. The remaining symmetry condition on the right-hand boundary of the typical element is applied to the solution through the point-matching technique. The results... 

A mathematical model is developed for analysis the dynamics of an intra-cavity laser spectroscopy and mode competition using the CO2 laser as the coherent source. The governing equations of system are derived and effect of the absorbing material on the laser modes, as a time-dependent term is considered. Thus, the application of the CO2 laser for intra-cavity laser spectroscopy with considering an inhomogeneous medium and effect of the absorbing material is investigated  

In this paper, the mechanical behavior of micro-rotating disks is investigated utilizing the strain gradient theory. The governing equation and boundary conditions are derived utilizing the variational method. The analytical solution for the derived equation is also presented. As a case study, some numerical results are presented to emphasize the importance of utilization of non-classical theories such as the strain gradient elasticity instead of the classical continuum theory in dealing with micro-rotating disks  

In this paper, an analytical solution is presented for free vibration and dynamic behavior of doubly curved laminated shell consisting of a functionally graded core layer and surface attached functionally graded piezoelectric layers. Shell through-thickness kinematics is based on higher order shear deformation theory of shells, whereas a quadratic variation is assumed for electric potential. Using Hamilton's principle and Maxwell's equation, the governing equations of motion under mechanical loads are derived as seven highly coupled partial differential equations. Implementing Laplace transformation, doing few mathematical operations and using Laplace inverse method, time dependencies of... 

The nonlinear dynamic and static deflection of a micro/nano gyroscope under DC voltages and base rotation are investigated. The gyroscope undertakes two coupled bending motions along the drive and sense directions and subjected to electrostatic actuations and intermolecular forces. The nonlinear governing equations of motion for the system with the effect of electrostatic force, intermolecular tractions and base rotation are derived using extended Hamilton principle. Under constant voltage, the gyroscope finds the preformed shape. First, the deflection of the micro/nano gyroscope under electrostatic forces is obtained by static and dynamic analyses. Furthermore, the static and dynamic... 

This article presents a process of numerically predicting and experimentally verifying the dispersion quality and penetration level of fuel particles entering and moving in various directions relative to vortex engine walls. If the length scale of particles considered in this study is not comparable to the chamber length and, furthermore, the density is ignored, the effect of the particle on the flow field can be neglected and a one-way solution will be viable for the problem. The solutions in each case are carried out to estimate the particle trajectory and parameters affecting it. The governing equations are converted to a set of nonlinear, coupled, ordinary differential equations (ODEs)... 

An enriched-FEM technique is presented for the crack growth simulation in large deformation ductile fracture problems using a non-local damage-plasticity model in the framework of eXtended Finite Element Method (X-FEM). The Lemaitre damage-plasticity model is used to capture the material degradation effect, in which the non-locality is enforced by solving a Helmholtz type equation in combination with the governing equation of the system based on an operator-split technique. A convergence study is performed to investigate the performance of X-FEM technique in plasticity problems. The accuracy and effectiveness of proposed X-FEM damage-plasticity model are verified through several numerical... 

In this study, the nonlinear partial differential equations governing two phase flow through porous media are solved using two different methods, namely, finite difference and finite element. The capillary pressure term is considered in the mathematical model. The numerical results on a 2-D test case are then compared with the experimental drainage process and water flooding performed on a glass type micromodel. Based on the obtained results, finite difference technique needs less computational time for solving governing equations of two phase flow, but findings of this method show less agreement with the experimental data. The finite element scheme was found to be more adequate and its... 

In this work, a hybrid finite-volume-element method is used to solve turbulent reacting flow in a combustion chamber considering detailed chemical kinetics. The hybrid unification enables the solver to treat the reacting flow in very complex geometries and to respect the required physical considerations fully. We employ two-equations standard κ-ω turbulence model incorporated with suitable wall functions to model the turbulence behavior. Assuming optically-thin gases, radiation effects are taken into account in our simulations. A flamelet combustion model is applied to consider the large detailed chemical kinetics, which can normally occur within combustion processes. Turbulence-chemistry... 

The present study aims at the free vibration analysis of double tapered columns. Foundation is assumed to be elastic and the effects of self-weight and tip mass with significant moment of inertia are considered. The governing equation of motion is obtained using the Hamilton principle, based on both the Euler-Bernoulli and Timoshenko beam models. Applying the power series method of Frobenius, the base solutions of the governing equations are obtained in the form of a power series via general recursive relations. Applying the boundary conditions, the natural frequencies of the beam/column are obtained using both models. The obtained results are compared with literature and a very good... 

In this study, the instability of spinning cylindrical shells partially filled with viscous liquid is investigated. Based on the Navier-Stokes equations for the incompressible flow, a 2D model is developed for liquid motion at each section of the cylinder. The governing equations of the cylinder vibrations are obtained based on the first-order shear deformable shell theory. The nonpenetration and no-slip boundary conditions of the flow on the wetted surface of the cylinder relate the liquid motion to the shell vibrations. Also the liquid pressure exerted on the cylinder wall combines the vibrations of the rotary cylinder to the liquid motion. By using the obtained coupled liquid-structure... 

In this study, the buckling of two joined isotropic conical shells under axial compression and simply supported boundary conditions is investigated. The governing equations are obtained using thin-walled shallow shell theory of Donnell-type and theorem of minimum potential energy. The continuity conditions at the joining section of the cones are appropriate expressions among stress resultants and deformations. The equations are solved by assuming trigonometric response in circumferential and series solution in meridional direction. The results are validated in comparison with the available results in the literature. Effects of semi-vertex angles and meridional lengths on the buckling load... 

In this paper, a size-dependent formulation is presented for vibration analysis of micro-end mill tool. The formulation is developed based on the strain gradient elasticity theory in order to enhance the modeling capability of micro-size structures. Due to stubby geometry of micro-tool, the shear deformation and rotary inertia effects are considered in the derivation of equations. Hence, based on the strain gradient Timoshenko beam theory, the extended Hamilton's principle is used to formulate a detailed dynamical model of the rotating micro-tool. The dynamical model includes a set of partial differential equations with gyroscopic coupling produced due to the spindle rotation. The governing... 

Stability analysis of a horizontal cantilevered pipe conveying fluid with an inclined terminal nozzle is considered in this paper. The pipe is modelled as a cantilevered Euler-Bernoulli beam, and the flow-induced inertia, Coriolis and centrifugal forces along the pipe as well as the follower force induced by the jet-flow are taken into account. The governing equations of the coupled bending-torsional vibrations of the pipe are obtained using extended Hamilton's principle and are then discretized via the Galerkin method. The resulting eigenvalue problem is then solved, and several cases are examined to determine the effect of nozzle inclination angle, nozzle aspect ratio, mass ratio and...