Sharif Digital Repository

In this article, wave propagation characteristics of a size-dependent graphene nanoplatelet (GNP) reinforced composite cylindrical nanoshell coupled with piezoelectric actuator (PIAC) and surrounded with viscoelastic foundation is presented. The effects of small scale are analyzed based on nonlocal strain gradient theory (NSGT) which is an accurate theory employing exact length scale parameter and nonlocal constant. The governing equations of the GNP composite cylindrical nanoshell coupled with PIAC have been evolved using Hamilton’s principle and solved with assistance of the analytical method. For the first time in the current study, wave propagation electrical behavior of a GNP composite... 

In this study, a cylindrical microshell stability reinforced by graphene nanoplatelets is investigated while an axial load is applied uniformly. In addition, viscoelastic foundation covers the composite nanostructure. Therefore, the impacts of the small scale parameter are studied while nonlocal strain gradient theory (NSGT) is considered. The present research deals for the first time with the consideration of viscoelastic, strain–stress size-dependent parameters along with taking into account of various boundary conditions (BCs), especially C-F ones put into effect on the proposed theory. The governing equations (G.Eqs) and BCs have been obtained utilizing energy method and solved with... 

In this study, a cylindrical microshell stability reinforced by graphene nanoplatelets is investigated while an axial load is applied uniformly. In addition, viscoelastic foundation covers the composite nanostructure. Therefore, the impacts of the small scale parameter are studied while nonlocal strain gradient theory (NSGT) is considered. The present research deals for the first time with the consideration of viscoelastic, strain–stress size-dependent parameters along with taking into account of various boundary conditions (BCs), especially C-F ones put into effect on the proposed theory. The governing equations (G.Eqs) and BCs have been obtained utilizing energy method and solved with... 

Graphene nanoplatelets with different surface functional groups and polarity were prepared by Hummer's method and electrochemical exfoliation of graphite in two aqueous acids. The XRD, FTIR and sedimentation tests performed to characterize the polarity of the prepared graphenes. The highest polarity was associated with the sample prepared by Hummer's method and the sample synthesized by electrochemical exfoliation in nitric acid medium showed the moderate polarity. Meanwhile, the sample prepared in sulfuric acid medium showed the lowest polarity. Then thermoplastic polyurethane (TPU)/graphene nanocomposite films were fabricated with solvent exchange method. While the dispersion state and... 

The use of hybrid filler is a promising strategy for development of thermally conductive polymer composites. This paper reported the measurement of thermal conductivity of the epoxy composite filled with a hybrid filler of graphene nanoplatelet (GNP) and silicon carbide (SiC) microparticles. For this hybrid filler, the effect of the average size of SiC on composite thermal conductivity was examined. The results showed that the thermal synergistic effect was highly affected by the average size of the SiC. By using a hybrid filler of 11% vol. GNP and 9% vol. 1 µm-size SiC micro-particles thermal conductivity has reached 3.44 W m−1 K−1. This value is 42% higher than the thermal conductivity of... 

In this study, the effect of graphene nanoplatelets (GNP)/distilled water nanofluid on the thermal performance of evacuated tube solar collector (ETSC) water heater was experimentally investigated. The mass percentage of GNP was considered at 0.025, 0.5, 0.075 and 0.1 wt%. The physical and thermal properties of the GNP nanofluids including stability, specific heat capacity, viscosity and thermal conductivity were investigated. The thermal efficiency tests on the solar collector were carried out for varying volumetric flow rate of 0.5, 0.1, and 1.5 L/min while the ASHRAE standard 93–2003 was considered to calculate the efficiency of the collector. The results indicated that the solar... 

This is the first research on the thermal buckling analysis of graphene nanoplatelets reinforced composite (GPLRC) doubly curved open cylindrical micropanel in the framework of numerical-based two-dimensional generalized differential quadrature method (2D-GDQM). Additionally, the small-scale effects are analyzed based on nonlocal strain gradient theory (NSGT). The stresses and strains are obtained using the high-order shear deformable theory (HOSDT). The rule of mixture is employed to obtain varying thermal expansion, and Poisson's ratio, while module of elasticity is computed by modified Halpin-Tsai model. In addition, nonlinear temperature changes along the GPLRC micropanel's thickness... 

In this research, thermal buckling and forced vibration characteristics of the imperfect composite cylindrical nanoshell reinforced with graphene nanoplatelets (GNP) in thermal environments are presented. Halpin–Tsai nanomechanical model is used to determine the material properties of each layer. The size-dependent effects of GNPRC nanoshell is analyzed using modified couple stress theory. For the first time, in the present study, porous functionally graded multilayer couple stress (FMCS) parameter which changes along the thickness is considered. The novelty of the current study is to consider the effects of porosity, GNPRC, FMCS and thermal environment on the resonance frequencies, thermal... 

Graphene nanoplatelets (GNPs) are ideal reinforcements for improving the mechanical properties of aluminum-based matrices due to their outstanding properties. However, it essentially depends on their uniform dispersion in the matrix. In this study, the challenge of uniform dispersion of graphene was performed by functionalizing the non-covalent surface and sonication of GNPs applying non-ionic polymeric ethyl cellulose (EC) surfactant, in which a colloidal mixture was provided with Al powder and graphene, followed by sintering at 620 °C and consolidation. The density and mechanical properties of nanocomposite specimens were investigated and compared with a non-surfactant-assisted Al/GNP... 

Due to a rapid development of process manufacturing, composite materials with graphene-reinforcement have obtained so much commercially notices in the promoted engineering applications. With this regard, the critical voltage and frequency characteristics of a graphene nanoplatelets (GNP) composite cylindrical nanoshell coupled with the piezoelectric actuator (PIAC) are investigated. The material properties of piece-wise graphene-reinforced composites (GNPRCs) are assumed to be graded through the thickness direction of a cylindrical nanoshell and are estimated based on a nanomechanical model. For the first time, the current study is considering the effects of the piezoelectric layer, GNPRC... 

The present study focuses on simultaneous influence of graphene nanoplatelets (GNP) and hydroxyapatite (HAp) nanopowder on microstructural, wear, tensile and biofunctional behavior of UHMWPE based nanocomposites used in biomedical applications, with the aim to utilize GNP's mechanical strength and wear resistance, while benefitting from HAp's biocompatibility at the same time. 0.1, 0.5 and 1 wt% GNP with 10 wt% optimized concentration of HAp were added to the UHMWPE matrix through an easy two-step approach consisting of solvent mixing and ultrasonication in ethanol as a liquid media. The dried nanocomposite samples of powder were then hot pressed at an optimized temperature and pressure to... 

Pyrolysis is a commonly used method for the recovery of used lubricating oil (ULO), which should be kinetically improved by a catalyst, due to its high level of energy consumption. In this research, the catalytic effects of carbon nanotube (CNT) and graphene nanoplatelets on the pyrolysis of ULO were studied through thermogravimetric analysis. First, the kinetic parameters of ULO pyrolysis including activation energy were calculated to be 170.12 and 167.01 kJ mol−1 by FWO and KAS methods, respectively. Then, the catalytic effects of CNT and graphene nanoplatelets on pyrolysis kinetics were studied. While CNT had a negligible effect on the pyrolysis process, graphene nanoplatelets... 

Used lubricating oil (ULO) is a heavy mixture of various hydrocarbons and needs to be treated before discharging. Considering ULO nature, it is more favorable to recover lighter hydrocarbon cuts from ULO, which not only improves the whole process economically, but also prevents the emission of hardly decomposable hydrocarbons into the environment. In this research, the potential of pyrolysis method for ULO recovery was studied. Furthermore, graphene nanoplatelets (GNP), γ- Fe2O3 and ZnO nanoparticles were used to improve the kinetics of the process and their impacts on the final product quality were evaluated. Based on the results, adding nanomaterials increased the tendency to produce gas... 

Thermoplastic polyurethane nanocomposites incorporating carbon nanotubes and graphene nanoplatelets were prepared through melt blending and compression molding, and the compounding process was optimized taking into account the different physical properties of one-dimensional carbon nanotubes and two-dimensional graphene nanoplatelets. Filler dispersion was further improved in the case of carbon nanotubes by noncovalent surface modification using a specific surfactant. The well-dispersed nanofillers favored enhanced phase separation in the thermoplastic polyurethane, leading to a better microstructure, which is able to improve the load transfer and maximize the tensile and viscoelastic... 

This article investigates the influences of nonuniform imperfection on the dynamic amplitude and resonance frequency of the nanoshell reinforced with graphene nanoplatelet (GNP). The novelty of the current study is to consider the effects of porosity, thermal loading and graphene platelet reinforced composites on the dynamic behavior of the nanostructure. Three-length scale parameters (l0=5 h, l1=3 h, l2=5 h) in the modified strain gradient theory (MSGT) show a better agreement with MD simulation in comparison with other theories. Finally, the effects of different factors on the dynamic amplitude and resonance frequency of the porous nanostructure are examined in detail. © 2019, © 2019... 

Convective heat transfer plays a significant role in numerous industrial cooling and heating applications. This method of heat transfer can be passively improved by reconfiguring flow passage, fluid thermophysical properties, or boundary conditions. The broader scope of nanotechnology introduced several studies of thermal engineering and heat transfer. Nano-fluids are one of such technology which can be thought of engineered colloidal fluids with nano-sized particles. In the present study, turbulent forced convection heat transfer to nanofluids in an axisymmetric abrupt expansion heat exchanger was investigated experimentally. During heat transfer investigation, the functionalized... 

This is the first research on the frequency analysis of a graphene nanoplatelet composite circular microplate in the framework of a numerical-based generalized differential quadrature method. Stresses and strains are obtained using the higher order shear deformation theory. The microstructure is surrounded by a viscoelastic foundation. Rule of the mixture is used to obtain varying mass density and Poisson’s ratio, whereas the module of elasticity is computed by a modified Halpin–Tsai model. Governing equations and boundary conditions of the graphene nanoplatelet composite circular microplate are obtained by implementing Hamilton’s principle. The results show that outer to inner radius ratio... 

This is the first research on the frequency analysis of a graphene nanoplatelet composite (GPLRC) microdisk in the framework of a numerical-based generalized differential quadrature method. The stresses and strains are obtained using the higher-order shear deformable theory. Rule of mixture is employed to obtain varying mass density, thermal expansion, and Poisson’s ratio, while module of elasticity is computed by modified Halpin–Tsai model. Governing equations and boundary conditions of the GPLRC microdisk covered with piezoelectric layer are obtained by implementing Hamilton’s principle. Regarding perfect bonding between the piezoelectric layer and core, the compatibility conditions are... 

Due to the rapid development of process manufacturing, composite materials with graphene-reinforcement have obtained commercially notices in promoted engineering applications. For this regard, vibrational characteristics of a cylindrical nanoshell reinforced by graphene nanoplatelets (GPL) and coupled with piezoelectric actuator (PIAC) is investigated. Also, the nanostructure is embedded in a viscoelastic medium. The material properties of piece-wise graphene-reinforced composite (GPLRC) are assumed to be graded in the thickness direction of a cylindrical nanoshell and estimated through a nanomechanical model. For the first time in the current study is considering the effects of... 

The current research focuses on suggesting a new potential application of polymeric materials for capacitor applications by focusing on polystyrene (PS)/ethylene-α-octene copolymer (EOC) blends. Polymeric materials have high dielectric strength (≈ 200 for PS), good processability, and flexibility. However, their low dielectric constants make them not suitable for capacitor applications. Therefore, suggesting a method for enhancing their dielectric constant accompanied by low tan δ proposes an excellent substitute for commonly used ceramic dielectrics. The current article investigates the control of the dielectric properties of PS/EOC blends by manipulating the graphene nanoplatelets (GNPs)...