Sharif Digital Repository

The usage of conventional fossil fuels has aided fast economic growth while also having negative consequences, such as increased global warming and the destruction of the ecosystem. This paper proposes a novel swarm-based metaheuristic method called Chimp Optimization Algorithm (ChOA) to tackle the environmental, economic dispatch issue and reducing the waste nonrenewable materials. In this regard, two objective functions named fuel cost function and emission cost function are proposed. Unique constrained handling also solves the challenge of multi-objective optimization. Standard IEEE 30 bus with six generators and a 10-unit system are used to demonstrate the usefulness of ChOA. The result... 

Lithium ions play a crucial role in the energy storage industry. Finding suitable lithium-ion-conductive membranes is one of the important issues of energy storage studies. Hence, a perovskite-based membrane, Lithium Lanthanum Titanate (LLTO), was innovatively implemented in the presence and absence of solvents to precisely understand the mechanism of lithium ion separation. The ion-selective membrane’s mechanism and the perovskite-based membrane’s efficiency were investigated using Molecular Dynamic (MD) simulation. The results specified that the change in the ambient condition, pH, and temperature led to a shift in LLTO pore sizes. Based on the results, pH plays an undeniable role in... 

This article is the first attempt to employ deep learning to estimate the frequency performance of the rotating multi-layer nanodisks. The optimum values of the parameters involved in the mechanism of the fully connected neural network are determined through the momentum-based optimizer. The strength of the method applied in this survey comes from the high accuracy besides lower epochs needed to train the multi-layered network. It should be mentioned that the current nanostructure is modeled as a nanodisk on the viscoelastic substrate. Due to rotation, the centrifugal and Coriolis effects are considered. Hamilton’s principle and generalized differential quadrature method (GDQM) are presented... 

In this study, frequency simulation and critical angular velocity of a size-dependent laminated rotary microsystem using modified couple stress theory (MCST) as the higher-order elasticity model is undertaken. The centrifugal and Coriolis impacts due to the spinning are taken into account. The size-dependent thick annular microsystem's computational formulation, non-classical governing equations, and corresponding boundary conditions are obtained by using the higher-order stress tensors and symmetric rotation gradient to the strain energy. By using a single material length scale factor, the most recent non-classical approach captures the size-dependency in the annular laminated microsystem.... 

In the current paper, vibrational and critical circular speed characteristics of a functionally graded (FG) rotary microdisk is examined considering a continuum nonlocal model called modified couple stress (MCS) model, for the first time in the literature. The generalized differential quadrature (GDQ) approach and variational method are used for deriving and solving the non-classical final relations. The FG size-dependent micro-sized disk’s final relations and corresponding boundary conditions (BCs) are achieved on the basis of the higher-order shear deformation (HSD) model. Then, a parametric analysis has been conducted to analyze the influences of the length scale factor, circumferential,... 

In the presented research, vibrational, and amplitude behaviors of a sandwich spinning disk made of two laminated layers and graphene nanoplatelets reinforced composite (GPLRC) core has been reported. The Coriolis and centrifugal impacts have been taken into account due to its rotational feature. The stresses and strains have been obtained through the high-order shear deformable theory (HSDT). The structure’s boundary conditions (BCs) are determined using laminated rotating disk’s governing equations employing energy methods and ultimately have been solved via a computational approach called generalized differential quadrature method (GDQM). The rotational disk’s vibrations with different... 

For the first time, in the current work, a dynamic stability analysis of a tilted curved pipe in a supersonic airflow under thermal loading is presented. The heat-transfer continuum problem is used for simulating the thermal environment conditions. The tilted pipe is reinforced by carbon nanotube agglomerations (CNTAs). For simulating the displacement fields of the current structure, Quasi-2D refined high order shear deformation theory is studied. The verification segment is divided into two parts. In the first and second sections, the credibility of the results of this study are confirmed by the results extracted using COMSOL multiphysics software and published articles in the literature,... 

In the present study, based on 12-unknown higher order shear deformation theory (HSDT), buckling and vibration analysis of FG-CNTRC rectangular plate are investigated for various types of temperature distribution and boundary conditions. Implementing Hamilton’s principle, the equations of motion are derived and solved by adopting the Navier solution for the simply supported boundary conditions and DQM method for other boundary conditions. Validation is carried out by comparing the numerical results with those obtained in the open literature. Also, a detailed parametric analysis is carried out to illuminate the influence of different system parameters such as CNT distributions, CNT volume... 

Due to the remarkable progress in the field of the manufacturing process, smart composites have become the desired target for high-tech engineering applications. Accordingly, for the first time, thermal buckling, critical voltage and vibration response of a thermally affected graphene nanoplatelet reinforced composite (GPLRC) microdisk in the thermal environment are explored with the aid of generalized differential quadrature method (GDQM). Also, the current microstructure is coupled with a piezoelectric actuator (PIAC). The extended form of Halpin-Tsai micromechanics is used to acquire the elasticity of the structure, whereas, the variation of thermal expansion, Poisson’s ratio, and density... 

In this study, a cylindrical microshell stability reinforced by graphene nanoplatelets is investigated while an axial load is applied uniformly. In addition, viscoelastic foundation covers the composite nanostructure. Therefore, the impacts of the small scale parameter are studied while nonlocal strain gradient theory (NSGT) is considered. The present research deals for the first time with the consideration of viscoelastic, strain–stress size-dependent parameters along with taking into account of various boundary conditions (BCs), especially C-F ones put into effect on the proposed theory. The governing equations (G.Eqs) and BCs have been obtained utilizing energy method and solved with... 

In this article, wave propagation behavior of a size-dependent spinning graphene nanoplatelet-reinforced composite (GNPRC) cylindrical nanoshell with porosity is presented. The effects of small scale are analyzed based on nonlocal strain gradient theory (NSGT), this accurate theory employs exact length scale parameter and nonlocal constant. The governing equations of GNPRC cylindrical nanoshell coupled with piezoelectric actuator (PIAC) are evolved by minimum potential energy principle and solved by the analytical method. For the first time in the current study, wave propagation-porosity behavior of a GNPRC cylindrical nanoshell coupled with PIAC is examined based on NSGT. The results show... 

This is the first research on the frequency analysis of a graphene nanoplatelet composite circular microplate in the framework of a numerical-based generalized differential quadrature method. Stresses and strains are obtained using the higher order shear deformation theory. The microstructure is surrounded by a viscoelastic foundation. Rule of the mixture is used to obtain varying mass density and Poisson’s ratio, whereas the module of elasticity is computed by a modified Halpin–Tsai model. Governing equations and boundary conditions of the graphene nanoplatelet composite circular microplate are obtained by implementing Hamilton’s principle. The results show that outer to inner radius ratio... 

Due to the rapid development of process manufacturing, composite materials with graphene-reinforcement have obtained commercially notices in promoted engineering applications. For this regard, vibrational characteristics of a cylindrical nanoshell reinforced by graphene nanoplatelets (GPL) and coupled with piezoelectric actuator (PIAC) is investigated. Also, the nanostructure is embedded in a viscoelastic medium. The material properties of piece-wise graphene-reinforced composite (GPLRC) are assumed to be graded in the thickness direction of a cylindrical nanoshell and estimated through a nanomechanical model. For the first time in the current study is considering the effects of... 

In the current paper, vibrational and critical circular speed characteristics of a functionally graded (FG) rotary microdisk is examined considering a continuum nonlocal model called modified couple stress (MCS) model, for the first time in the literature. The generalized differential quadrature (GDQ) approach and variational method are used for deriving and solving the non-classical final relations. The FG size-dependent micro-sized disk’s final relations and corresponding boundary conditions (BCs) are achieved on the basis of the higher-order shear deformation (HSD) model. Then, a parametric analysis has been conducted to analyze the influences of the length scale factor, circumferential,... 

Composite structures encounter different types of imperfections and defects during the installation, working environment, and fabrication process. In the present research, a 3D-poroflexibility theory has been presented to study the bending responses of the functionally graded graphene nanoplatelets reinforced composite (FG-GPLRC) axisymmetric circular/annular sector plates on the elastic substrate. For modeling elastic substrate, horizontal friction force and the elastic foundation with five elastic parameters have been formulated. For obtaining the exact displacement and stress/strain responses of the current structure, a discrete singular convolution integration method (DSC-IM) has been... 

In this study, frequency simulation and critical angular velocity of a size-dependent laminated rotary microsystem using modified couple stress theory (MCST) as the higher-order elasticity model is undertaken. The centrifugal and Coriolis impacts due to the spinning are taken into account. The size-dependent thick annular microsystem's computational formulation, non-classical governing equations, and corresponding boundary conditions are obtained by using the higher-order stress tensors and symmetric rotation gradient to the strain energy. By using a single material length scale factor, the most recent non-classical approach captures the size-dependency in the annular laminated microsystem.... 

In this article, thermal buckling and frequency analysis of a size-dependent laminated composite cylindrical nanoshell in thermal environment using nonlocal strain–stress gradient theory are presented. The thermodynamic equations of the laminated cylindrical nanoshell are based on first-order shear deformation theory, and generalized differential quadrature element method is implemented to solve these equations and obtain natural frequency and critical temperature of the presented model. The results show that by considering C–F boundary conditions and every even layers’ number, in lower value of length scale parameter, by increasing the length scale parameter, the frequency of the structure... 

Failure in sheet metal forming can occur by necking, fracture or wrinkling. By using a forming limit diagram (FLD) as a powerful tool to prevent sheets metal failures in the forming process, provides parameters controlling throughout forming. There are different developed methods for predicting FLDs, which estimate sheet metal forming strains limits. Assessment of FLD estimation reveals that there is a dependency between the effect of several factors containing normal stress, shear stress, sheet thickness, mechanical properties, metallurgical properties, yield function, strain path, and bending with formability. In this research, the effects of bending via two finite element models are... 

This is the first research on the nonlinear frequency analysis of a multi-scale hybrid nanocomposite (MHC) disk (MHCD) resting on an elastic foundation subjected to nonlinear temperature gradient and mechanical loading is investigated. The matrix material is reinforced with carbon nanotubes (CNTs) or carbon fibers (CF) at the nano- or macroscale, respectively. We present a modified Halpin–Tsai model to predict the effective properties of the MHCD. The displacement–strain of nonlinear vibration of multi-scale laminated disk via third-order shear deformation theory (TSDT) and using Von Karman nonlinear shell theory is obtained. Hamilton’s principle is employed to establish the governing... 

In this research, electrically characteristics of a graphene nanoplatelet (GPL)-reinforced composite (GPLRC) microdisk are explored using generalized differential quadrature method. Also, the current microstructure is coupled with a piezoelectric actuator (PIAC). The extended form of Halpin–Tsai micromechanics is used to acquire the elasticity of the structure, whereas the variation of thermal expansion, Poisson’s ratio, and density through the thickness direction is determined by the rule of mixtures. Hamilton’s principle is implemented to establish governing equations and associated boundary conditions of the GPLRC microdisk joint with PIAC. The compatibility conditions are satisfied by...