Sharif Digital Repository

Mixed-convection flow of nanofluids inside a vertical rectangular channel partially filled with open-cell metal foam and subject to a constant wall-heat flux was investigated experimentally and numerically. Al2O3-water nanofluids with different concentrations were prepared and their stability was examined using UV-Vis spectroscopy. Dynamic light scattering method was used to determine particle size distribution of the nanofluid feedstock. The outlet temperature and pressure drop were measured for different nanofluid flow rates (i.e., Reynolds number values). In the numerical section, a two-dimensional volume-averaged form of the governing equations was used. The velocity and temperature... 

In this research, a finite element model was developed in order to simulate the two-step residual stress distribution of a thermal barrier coating system, considered to be used in diesel engine cylinder head, with a real roughness and real porosity. Two steps including the bond coat and the top coat deposition processes were taken into account. The real geometry of coating layers, including the roughness and the porosity, was also considered based on a scanning electron microscopy image. Then, effects of the convective heat transfer coefficient and initial substrate and substrate/bond coat preheating temperatures on the residual stress were studied. Obtained results illustrate that the... 

This is a theoretical study that extends a classical method of treating the convection heat transfer in complex geometries to gaseous slip flow forced convection in microchannels with H1 thermal boundary condition. Through this line, the momentum and energy equations in cylindrical coordinates are made dimensionless. Afterward, solutions are presented that exactly satisfy the dimensionless differential equations along with the symmetry condition and finiteness of the flow parameter at the origin. The first-order slip boundary conditions are then applied to the solution utilizing the least squares matching method. Though the method is general enough to be applied to almost any arbitrary cross... 

This is a theoretical study dealing with mixed electroosmotic and pressure-driven flow of a Newtonian liquid in a rectangular microchannel. Both and thermal boundary conditions are considered and the Debye-Hückel linearization is invoked. The governing equations are made dimensionless assuming fully developed conditions and then analytically solved using an infinite series solution. The governing factors are found to be the dimensionless Debye-Hückel parameter, velocity scale ratio, dimensionless Joule heating parameter, and channel aspect ratio. The results indicate that the Nusselt number is an increasing function of the channel aspect ratio, whereas the opposite is true for the velocity... 

This is a theoretical study dealing with longitudinal gaseous slip flow forced convection between a periodic bunch of microcylinders arranged in regular array. The selected geometry has applications in microscale pin fin heat sinks used for cooling of microchips. The flow is considered to be hydrodynamically and thermally fully developed. The two axially constant heat flux boundary conditions of H1 and H2 are considered in the analysis. The velocity and temperature discontinuities at the boundary are incorporated into the solutions using the first order slip boundary conditions. The method considered is mainly analytical in which the governing equations and three of the boundary conditions... 

Purpose - The purpose of this paper is to study a two-dimensional steady convective flow of a micropolar fluid over a stretching sheet in the presence of radiation with constant temperature. Design/methodology/approach - The corresponding momentum, microrotation and energy equations are analytically solved using homotopy analysis method (HAM). Findings - To validate the method, investigate the accuracy and convergence of the results, a comparison with existing numerical and experimental results is done for several cases. Finally, by using the obtained analytical solution, for the skin-friction coefficient and the local Nusselt number as well as the temperature, velocity and angular velocity,... 

Nanofluid is the term applied to a suspension of solid, nanometer-sized particles in conventional fluids; the most prominent features of such fluids include enhanced heat characteristics, such as convective heat transfer coefficient, in comparison to the base fluid without considerable alterations in physical and chemical properties. In this study, nanofluids of aluminum oxide and copper oxide were prepared in ethylene glycol separately. The effect of forced convective heat transfer coefficient in turbulent flow was calculated using a double pipe and plate heat exchangers. Furthermore, we calculated the forced convective heat transfer coefficient of the nanofluids using theoretical... 

The effect of the corona wind on the natural convection at absorber of a solar chimney power plant pilot was investigated experimentally. The aim of the study is to improve the efficiency of SCPP through enhanced the heat transfer coefficient of absorber with corona wind. The results show that corona wind enhanced the absorber convective heat transfer coefficient leading to increment in air the velocity and the output power of the SCPP. The amount of heat transfer of pilot increased more than 14.5% when applying voltage of 15 KV and the speed in chimney experienced about 72% amelioration  

In this study, the effects of ferrofluids on the forced convective heat transfer in a tube with a round cross section under constant heat flux in the laminar flow regime are investigated experimentally. For this purpose, an experimental setup was designed and built. Furthermore, the effects of an external magnetic field on the forced convective heat transfer were examined for various Reynolds numbers and volume concentrations. The parameters of magnetic field strength, magnetic field arrangement, the constancy or oscillation of the magnetic field and also its oscillatory mode were examined. As a result of the experimental studies, in the absence of a magnetic field enhancement in convective... 

Convection heat transfer below a horizontal, hot, and isothermal strip of infinite length and width of 2L embedded in fluids with different Prandtl number (Pr) and Nusselt number (Nu) is analyzed with the aid of integral method. A new concept is utilized to determine the boundary layer thickness at the strip's edge, which is based on matching the flow rate of the boundary layer below the strip at its edge and the flow rate of the plume, which forms after the heated fluid detaches from the strip's edge. In addition to these novelties, a numerical model is developed to verify the analytical framework, and an excellent agreement is observed between the analytical and numerical models  

This research investigated the forced convection heat transfer by using the swirling impinging jets. This study focused on nozzles, which equipped with twisted tapes via a numerical approach. The computational domain created by utilizing the fully structured meshes, which had very high quality from the viewpoint of aspect ratio and skewness. The numerical simulations were performed at four different jet-to-plate distances (L/D) of 2, 4, 6 and 8, four Reynolds numbers of 4000, 8000, 12,000 and 16,000, and also four different twist ratios (y/w) of 3, 4, 5 and 6. The mesh-independent tests were conducted based upon the average Nusselt number. The obtained results revealed good agreement with... 

Numerical investigation of fluid flow structure and convective heat transfer due to a circular jet impinging on a rotating disk is performed. Temperature and convection heat transfer coefficient are calculated. Flow is considered to be steady, incompressible and turbulent. k-ε RNG model is used to model the turbulent flow. Results are compared with experimental data showing good agreement. Two new criteria are introduced and used to evaluate the performance of cooling process, the first is maximum temperature difference on the disk, and the second is the average temperature of the disk. The first parameter shows the uniformity of temperature distribution in the disk and the second shows the... 

A numerical study has been carried out to investigate the fluid flow structure and convective heat transfer due to a circular jet impinging on a rotating disk. The temperature distribution and convection heat transfer coefficient on the disk are calculated. Flow is considered to be steady, incompressible and turbulent. k-e RNG model is used to model the turbulent flow. Two new criteria are introduced and used to evaluate the performance of cooling process which are maximum temperature difference on the disk and the average temperature of the disk. The first parameter shows the uniformity of temperature distribution in the disk and the second shows the effect of both thermo physical... 

Grinding is widely used for manufacturing of components that require fine surface finish and good dimensional accuracy. In this study a thermo-mechanical finite element analysis is conducted to find out how grinding parameters can affect temperature and residual stress distribution in the workpiece. Results of parametric study presented in this work indicate, by carefully selecting the grinding parameters, minimum thermal and mechanical damage can be achieved. Higher workpiece velocities produce higher surface residual stress. By increasing depths of cut, depth of tensile residual stresses increases. Convection heat coefficient does not have any considerable effect on surface residual stress... 

In this paper, a two-dimensional numerical approach is used to study the effect of micro combustor height, mass flow rate and external convection heat transfer coefficient on the temperature and species mass fraction profiles. A premixed mixture of H2-Air with a multi-step chemistry is used. The transient gas phase energy and species conservation equations result in an Advection-Diffusion-Reaction system that leads to two stiff systems of PDEs. In the present work, the computational domain is solved through the Strang splitting method, which is suitable for a nonlinear stiff system of PDEs. A revised boundary condition for the velocity equation is applied and its effect on the flow... 

Magnetic convection heat transfer in a two-dimensional square cavity induced by magnetic field gradient is investigated numerically using a semi-implicit finite volume method. The side walls of the cavity are heated with different temperatures, the top and bottom walls are isolated, and a permanent magnet is located near the bottom wall. Thermal buoyancy-induced flow is neglected due to the nongravity condition on the plane of the cavity. Conditions for the different values of non-dimensional variables in a variety of ferrofluid properties and magnetic field parameters are studied. Based on this numerical analysis, a general correlation for the overall Nusselt number on the side walls is... 

Microchannels are at the forefront of today's cooling technologies. They are widely being considered for cooling of electronic devices and in micro heat exchanger systems due to their ease of manufacture. One issue which arises in the use of microchannels is related to the small length scale of the channel or channel cross-section. In this work, the maximum heat transfer and the optimum geometry for a given pressure loss have been calculated for forced convective heat transfer in microchannels of various cross-section having finite volume for laminar flow conditions. Solutions are presented for 10 different channel cross sections: parallel plate channel, circular duct, rectangular channel,... 

Forced convective of a nanofluid that consists of water and Al2O3 in horizontal tubes has been studied numerically. Computed results were validated with existing well established correlation. Two-phase Eulerian model has been implemented for the first time to study such a flow field. A single-phase model and two-phase mixture model formulations were also used for comparison. The comparison of calculated results with experimental values shows that the mixture model is more precise. It is illustrated that the single-phase model and the two-phase Eulerian model underestimates the Nusselt number. Effects of nanoparticles concentration on the thermal parameters are also discussed  

Steady, laminar, natural-convection flow in the presence of a magnetic field in a porous cavity heated from left wall sinusoidally and cooled from right wall is considered. It is well known that unavoidable hydrodynamic movements can be damped with the help of a magnetic field. The Finite Volume method and SIMPLE algorithm for discretizing is used to solve the non-dimensional governing equations. The Convection and Diffusion term of the equations are discretized by Central Difference Scheme (CDS).The numerical procedure has been done over a range of Rayleigh number, Ra, and value of Hartmann number (Ha), 0 ≤ Ha ≤ 150 and effect of them is investigated on average and local Nusselt number.... 

We study the natural convection heat transfer in a tilted square cavity with different tilt angles. The cavity is subject to a high gradient temperature resulting in high Rayleigh number flows. The fluid is air and is treated as an ideal gas. The flow is laminar. The fluid properties change with temperature variation using Sutherland's law. Because of imposing large temperature gradients to the two cavity opposite walls, there is substantial density variation in the domain. We use a novel non-Boussinesq algorithm to model the density variation fully. Therefore, the current results are considerably different from those obtained using the classical Boussinesq-based methods, which replace the...